Parting out my 135i, Moton, AST, Quaife, M3 links, Procede V5, JB4 and etc

[madmaxhk]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Hi all,
Finally sold my 135i. I have the following parts for sale;

1. Used Quaife LSD + 3.46 final drive complete, both bought new from HPA, installed in march of 2011, 9000km on them, [SOLD]

2. Used Moton clubsport 2 ways for 135i/335i/1M/M3 with a pair of brand new sleeve kit (for 1M/M3), no camber plate with 400lb swift springs and 800lb swift springs or choice of a set of brand new 500lb front swift sprains. 7 clicks for bump and 7 clicks for rebound adjustment. Bought in December 2011 and installed on Jan 2012, only use less than 1000km. This coil over original designed for 135i with M3 lower camber link kit. It can be installed on 1M/M3 with a pair of sleeve kits (brand new). Asking for $3800 or best offer. http://www.hpashop.com/Moton-Clubspo...t-e82-nonM.htm

PRICE REDUCED to $3400 shipped.



3. used AST 4100 for 135i/335i, with rear spring height adjuster, but without springs, no camber plate. 4000km mileage only. Rear dampers revalved to 50% stiffer than before. the threads on the bottom of the rear damper needs a minor repair. [SOLD]
http://www.hpashop.com/AST-E82-Coilo...lovers-e82.htm

4. a pair of used AST 5100 for 1M/M3 rear dampers only, 3000km mileage. [SOLD]

5. used Vorshalg camber plate for AST/Moton dampers, $300. This camber plate will be reserved for the one who gets AST/Moton coilover.

6. HPA brand new adjustable toe arm for 135i/335i, asking for $250
http://www.hpashop.com/HP-Autowerks-...2-e9x-nonM.htm

7. Used M3 lower rear camber link conversion kit for 135i/335i, less than 4000km mileage [SOLD]
8. Used M3 Front Control Arm Kit for 135i/335i, 4000km mileage, headlight regulating rod not included, consist of Front tension rod kit x 2 and front lower wishbone kit x 2, [SOLD]
9. used Rear upper link kit, [SOLD]
10. used Rear guide rod, [SOLD]


11. used Procede V5, 2.0 version, locked, for 135i/335i/1M, [SOLD]

12. used JB4 PNP + USB cable, [SOLD]

13. used Berk Technology Downpipe Back Street Performance Exhaust with powder coating muffler, [SOLD]
http://www.berktechnology.com/produc...rmance-exhaust

14. used 135i driveshaft, 1371mm. You need this shaft if you want the quaife LSD for you "Right hand drive" manual 135i. Asking for $350.

15. used BMW performance steering wheel LCD screen version, for 6MT, complete with harness, [SOLD]

Please note that I'm located in Hong Kong, so it will take some time to arrive your destination and I'll take paypal only. I'm only going to charge you local delivery instead of international delivery charge.
I'm prefer to sell them as a package price or combine shipping in order to save the freight costs. Feel free to drop me an email if you are interested.

[sparkyblue]

Interested in the Berk Technology Downpipe Back Street Performance Exhaust, you have a PM.

[JefryHorizon]

steering wheel pics pls.

TY

[Sauce]

Great selection of parts. PM'd

[madmaxhk]

Originally Posted by JefryHorizon

steering wheel pics pls.

TY

Here u go.

[bimmer670]

interested in both item. PM'ed


11. used Berk Technology Downpipe Back Street Performance Exhaust with powder coating muffler, asking for $600 or best offer.
13. used BMW performance steering wheel LCD screen version, complete with harness, asking for $750 or best offer.

[bimmer670]

have a question . exhaust for N55 ? or N54?? thank you!


ps. it was stupid question . exhaust are same with n55 and n54

[turbo335i+545]

I'll take the jb4 off your hand pm your PayPal

[TunedM2C]

Originally Posted by madmaxhk

Here u go.

Which version is this wheel?

[RaihaX]

Originally Posted by Tuned1M

Which version is this wheel?

That is v1

Is the LSD for a at or mt?

[madmaxhk]

Originally Posted by RaihaX

That is v1

Is the LSD for a at or mt?

It is for both AT and MT. As My understanding, AT has bolted ring gear, it is easier to just the LSD, however the MT has the weld gear, so pumkin with LSD is the best solution.

[kkrikkett]

Originally Posted by madmaxhk

It is for both AT and MT. As My understanding, AT has bolted ring gear, it is easier to just the LSD, however the MT has the weld gear, so pumkin with LSD is the best solution.

Sent u pm on this

[Focusedintntions]

Originally Posted by madmaxhk

It is for both AT and MT. As My understanding, AT has bolted ring gear, it is easier to just the LSD, however the MT has the weld gear, so pumkin with LSD is the best solution.

The auto's also have a shorter final drive ratio so if this is put on a manual they will get faster acceleration but worse gas mileage. The manual rear diff is a 3.06 i believe. So buyers of it should be aware of that.

[RevC]

could you please send me closer pics of the steering wheel?

[madmaxhk]

Originally Posted by RevC

could you please send me closer pics of the steering wheel?

Check the below link out.

http://www.1addicts.com/forums/album.php?albumid=6358

[savvy75]

Is the JB4 still available?
Is it for the N54 twin turbo?
Andy

[madmaxhk]

Originally Posted by savvy75

Is the JB4 still available?
Is it for the N54 twin turbo?
Andy

sorry. Sold!

[335_MI6]

Pm me best price for the steering wheel shipped to 20854

[madmaxhk]

Originally Posted by 335_MI6

Pm me best price for the steering wheel shipped to 20854

Steering wheel sold.

[madmaxhk]

[QUOTE=madmaxhk;11596755]Hi all,
Finally sold my 135i. I have the following parts for sale;


2. Used Moton clubsport 2 ways for 135i/335i/1M/M3 with a pair of brand new sleeve kit (for 1M/M3), no camber plate with 400lb swift springs and 800lb swift springs or choice of a set of brand new 500lb front swift sprains. 7 clicks for bump and 7 clicks for rebound adjustment. Bought in December 2011 and installed on Jan 2012, only use less than 1000km. This coil over original designed for 135i with M3 lower camber link kit. It can be installed on 1M/M3 with a pair of sleeve kits (brand new). Asking for $3800 or best offer. http://www.hpashop.com/Moton-Clubspo...t-e82-nonM.htm

PRICE REDUCED to $3400 shipped.



New reduced price for the Moton clubsport.