|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
break in period
|
|
05-16-2005, 11:10 AM | #24 |
there is no spoon
243
Rep 867
Posts |
My last car also had a "recommended" first oil change at 15,000, however, after some people on that car's forum called the manufacturer directly, they indicated that recommendation is IF you drive your car very mildly, otherwise, they do not recommend waiting for more than 10K miles. However, the first change shouldn't be 3000 miles, it should be around 5000+ due to the "first blend oil" someone just mentioned.
On another note, I went to Irvine BMW to test drive again over the weekend, and the sales there actually told me no break in is required. In fact I should drive it just as I would drive it regularly because the first 300 miles, the ECU will program how the car reacts based on your driving habits. Now do you guys think this is wise? Again, with my last car's experience, the ECU also suppose to "learn" your habits, but it could be reset if you unplug the battery for about 30 min. So I think I would break in the car normally for the first couple of thousand miles, then once its properly broken in, I'll reset the ECU and allow it to learn my habits again. Unless on BMW this can't be "un-learned". |
Appreciate
0
|
05-16-2005, 11:22 AM | #25 |
Lieutenant
36
Rep 446
Posts
Drives: '03 Passat, '09 Cayman S
Join Date: Apr 2005
Location: Troy, MI
|
Let me muddy the waters more. This may seem heretical, but here's someone who doesn't agree with breaking in a car in the way that manufacturers recommend.
Break-in Obsolete? |
Appreciate
0
|
05-16-2005, 07:37 PM | #26 |
Captain
33
Rep 663
Posts |
Damn I hate this topic. There are just so many opinions and messages coming from the manufacturer, experts and so-called experts I just don't know which is right anymore.
I think I will just drive my E90 as if there were no break-in period and see what happens. I am dizzy from reading all the opinions. |
Appreciate
0
|
05-16-2005, 08:26 PM | #27 |
First Lieutenant
101
Rep 374
Posts |
Just drive it and enjoy it. I didn't break in my E46 or my X5 and didn't have any issues. I was careful, but i did redline many times during the first 1200 miles.
|
Appreciate
0
|
05-17-2005, 12:21 AM | #28 | |
Captain
33
Rep 663
Posts |
Quote:
I'm also going to try to vary engine speeds as much as I can on the long drive I'll be taking the day after I pick it up, from LA up to Seattle. Last edited by Armen52; 05-17-2005 at 12:23 AM.. Reason: more sense-making english |
|
Appreciate
0
|
05-17-2005, 02:38 AM | #29 |
First Lieutenant
18
Rep 336
Posts |
I drove my '04 E46 like I was walking on glass for like 2000 miles..I dont think I went over 3 grand, let alone 4 grand...the car adapts to the way you drive and when they test these thing right out off the assemble line, they go way over 4000 rpm's...
With my X5, I push the thing as far as it will go...screw it.... |
Appreciate
0
|
05-17-2005, 03:02 AM | #31 |
Private
26
Rep 65
Posts |
Yeah...I agree with the direction this topic is heading towards. Im doing European Delivery and will definitely not be keeping this bad boy under 4 grand and 90 MPH. Im going to be on the frickin Autobahn. Who in their right mind can not give in to the temptation of just flooring it through Germany? I hope you guys are right about not having to break it in properly. =).
__________________
2006 Jet Black 330i
Black Leatherette Aluminum Trim Sports Package Heated Seats Sat Prep ED on June 28th |
Appreciate
0
|
05-18-2005, 04:48 AM | #33 |
Major General
695
Rep 7,308
Posts
Drives: see above.
Join Date: Apr 2005
Location: Yorkshire, UK
|
My dealer said that as long as I dont stamp on the brakes from 150mph then all should be OK. He said not to bother with the breaking in stuff!!
I do though - I cant bear the thought of me causing harm to my E90! |
Appreciate
0
|
05-18-2005, 09:11 PM | #34 |
Private First Class
28
Rep 135
Posts |
I currently drive a 2004 V-6 Accord. Manual states that normal service interval is 7,500 miles (severe duty 3,750 miles). After reading a ton of used oil analysis reports from Honda owners, I did the following and sleep very well . The factory fill is Castrol conventional apparently loaded up with a lot of moly ("special break in additive"). I followed the manual - varied revs, didn't redline it (actually, didn't break 4,000 if I could help it), easy on the brakes and drove like my grandmother for the first 1,000 miles. Frequent downshifts manually into 3rd to help with engine braking, etc. After that, I kicked the bitch in the ass like I meant it and basically just drove it as hard as I do now . Had stealership change to factory oil at 3,750. Drove it to 7,500 and then switched to Amsoil XL 5W-20(synthetic). Changed again with Amsoil at 15,000 and had my oil analyzed - came back perfect except for the usual Honda V-6 copper level (those things puke copper when new). Runs like a champ at 20K now and I get 29+ mpg driving like a bat out of hell on the highway. $0.02, YMMV.
|
Appreciate
0
|
05-19-2005, 01:40 AM | #35 |
Captain
33
Rep 663
Posts |
If Honda can use a special blend from the factory if they need it, I'm sure BMW is doing the same. I will just trust the BMW engineers rather than some motorcycle repair guy.
|
Appreciate
0
|
05-26-2005, 03:47 PM | #36 |
Captain
288
Rep 874
Posts |
I see no reason why we should wonder what to do beyond what the manual says. Personally, I would put very little stock in what a salesman says, especially compared to the manual!
I say that unless you have a real NEED to not follow the break-in process, you should follow it. Also, the thing the salesman said about the ECU being set in the first 300 miles only is crap. The settings must be adaptive and change as driving changes over time. |
Appreciate
0
|
05-26-2005, 08:49 PM | #38 |
Enlisted Member
3
Rep 33
Posts |
So adding more fuel to the debate: the manufacturers of airplane engines *all* recommend that during the first 50 flight hours after installing an overhauled or new engine to keep the power at 75% or greater (unless landing or taxiing) and the mixture full rich (to aid in cooling). In other words: flog it as hard as you can, but at a constant rate.
I broke in my current car (VW GTI VR6) by varying the speed and revving it to redline after the first 100-200 miles of driving. I've had absolutely no problems with the engine at all, and am planning on doing the same with my 330i when it arrives. |
Appreciate
0
|
05-26-2005, 09:16 PM | #39 | |
Captain
288
Rep 874
Posts |
Quote:
|
|
Appreciate
0
|
05-26-2005, 09:17 PM | #40 | |
Private First Class
12
Rep 136
Posts |
Quote:
|
|
Appreciate
0
|
05-26-2005, 09:18 PM | #41 | |
Private First Class
12
Rep 136
Posts |
Quote:
|
|
Appreciate
0
|
05-26-2005, 09:22 PM | #42 |
First Lieutenant
16
Rep 310
Posts |
I just got my car yesterday, and let me tell you i drove it like i stole it.... car is amazing i love it. im not sure what is better for the car, but im sure ill take it a lil easier now that the the whole "lets see what this baby can do" mentality has left me. i still dont plan on keeping her under 4500 rpm's, but i wont redline it every single time i accelerate... thats for sure.
RB |
Appreciate
0
|
05-26-2005, 10:26 PM | #43 | |
Enlisted Member
3
Rep 33
Posts |
Quote:
What is known is that following the manufacturer's recommendation doesn't seem to destroy the engine. At the same time, there is a good body of evidence that shows that a break-in technique of running the engine hard is also not going to destroy the engine. |
|
Appreciate
0
|
05-26-2005, 10:29 PM | #44 | |
Lieutenant
88
Rep 473
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|