335i turbo on 135i?

[SGJB135i]

Hey guys, I read some stuff about a 335i turbo not fitting on a 135i? The turbos are from a 335is. Is that true? Let me know, thank you

[135Hoser]

the rear? turbo outlet is different.

They will not fit, and to my knowledge the 335is turbos are the exact same as the 335, which are the same as the 535, which are the same as the 135 (sans outlet)

The only thing the 335is has going for it from the factory performance wise is a different tune. Turbos are the same.

[SGJB135i]

Originally Posted by 135Hoser

the rear? turbo outlet is different.

So i wouldn't be able to use them at all?

[135Hoser]

Originally Posted by Jetblack135

So i wouldn't be able to use them at all?

You can swap the CHRA (little bit inside your turbo that actually does stuff) if your turbos have failed.

I'm assuming yoru turbos are smoking/making noises is the reason you want to swap in 335is turbos?

[SGJB135i]

Originally Posted by 135Hoser

You can swap the CHRA (little bit inside your turbo that actually does stuff) if your turbos have failed.

I'm assuming yoru turbos are smoking/making noises is the reason you want to swap in 335is turbos?

Yeah it's annoying, I just installed downpipes and it's smoking

[Reapur]

Did u miss the tread that says you will smoke a bit right after a DP install?

[SGJB135i]

Originally Posted by Reapur

Did u miss the tread that says you will smoke a bit right after a DP install?

It's a lot! Not little!!

[Sixle]

Not too well-versed on this, but while researching Rob Beck turbo's I noticed they have a seperate core charge for the 135i and 335i turbo's because there is a significant difference. IIRC it was a $300 core refund for 335 cores and a $600 core refund for 135i cores and they made note of needing 135i cores more than 335 cores.