|
|
|
06-02-2012, 05:19 AM | #1 |
New Member
5
Rep 29
Posts |
Neova AD08 225/255 -18
Hello guys,
I want to mount Neova's 225/40-18 F and 255/35-18 R as a road tire. I would use the oem rims, i saw that the tires are very wide .................any of you use these tires, there are problems with rubbing? There are problems with rubbing passengers on board? I have Bilstein Pss10, camber plates Dinan and Front control arm kit M3..................Camber degrees: -2.5° F and -2.5° R. For Track use i have the wheels F. 8X18 ET45 and R. 8.5x18 ET50 with Michelin SportCup F.235/40-18 and R.265/35-18................little rubbing at the rear only pushing very strong cornering . I would not have problems with the equipment of the track on board ? thank's
__________________
135i Edition Pega: Power Kit BMW Performance + JB4 Map5+CPS/SLD , Kit Intercooler AA, DDV kit valve RR, DPs resonated AR Design,BMS Dual Cone,OCC AR, Bmw Performance Exhaust, Brake lines HEL, RBF660, Pagid RS29, Camber Plates Dinan,Front Control Arm Kit M3,Front Anti Roll Bar M3, Rear Anti Roll Bar Kit M3,Rear Subframe bushings M3,Bilstein PSS10s, QUAIFE ATB LSD........
Last edited by gimax; 06-02-2012 at 05:30 AM.. |
06-04-2012, 12:50 PM | #2 |
Private
5
Rep 80
Posts
Drives: 2008 BMW 135i
Join Date: Jun 2007
Location: Des Moines, IA
|
I have AD08 225/255 mounted on stock wheels. They are 1" wider than the RE-11 they replaced. I have the stock ride height and they do not rub. I have M3 front arms along with -1* front and -2* rear camber.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|