|
|
|
02-18-2014, 01:32 PM | #1 |
Private
6
Rep 75
Posts |
M3 Conversion - Need good shop in San Diego
Any body recommend a shop that has done a m3 suspension conversion.
Would like to go to someone that has already done a few. Thanks |
02-18-2014, 02:20 PM | #3 |
Слава Украине!
2313
Rep 2,440
Posts |
|
Appreciate
0
|
02-18-2014, 03:21 PM | #4 |
Resident Tamed Racing Driver
298
Rep 4,697
Posts |
Seeing as the essentially pioneered the swap, I'd say so.
__________________
2005 E46 M3 Interlagos/Cinnamon with Sunroof Delete
|
Appreciate
0
|
02-18-2014, 04:06 PM | #5 |
Colonel
164
Rep 2,409
Posts |
What part of the m3 suspension do you want to install??? It all bolts up to the 135i no magic to it, unless you're only swapping some of the parts not all...
|
Appreciate
0
|
02-18-2014, 05:59 PM | #6 |
Banned
6
Rep 203
Posts |
Like you said, its not rocket science and its not building a space shuttle. If the OP is 200 miles away it would be nuts to drive that far for suspension work and there are likely many competent, qualified shops that could easily handle the work well within a 200 mile range.
|
Appreciate
0
|
02-18-2014, 06:25 PM | #7 |
Banned
1518
Rep 4,744
Posts
Drives: S65 1M Clone & E92 M3 4.6L
Join Date: Apr 2011
Location: San Francisco
|
If you are in SD, go to HG Motosports. Mike will take care of you there.
http://www.hgmotorsports.com |
Appreciate
0
|
02-19-2014, 01:19 AM | #8 |
Captain
113
Rep 614
Posts
Drives: BMW 120d e82 M Sportpaket
Join Date: Mar 2011
Location: France
|
If you want to fit ALL the bits of the M3 suspension, there will be some work ... I went on HP Autowerks website advises for reflecting/ordering the stuff I needed for my M chassis conversion
__________________
M Sport package, Stage 1, CDV, BMC airfilter, VMR vb3, ST XTA, BMW Performance stuff, M3 arms, E93 M3 anti-roll bars F and R, ... French community of 1 and 2 Series: One-Two-Bimmers |
Appreciate
0
|
02-24-2014, 04:59 PM | #9 |
Private
6
Rep 75
Posts |
I was hoping for a recommendation in San Diego, from someone that has had it done.
Installing all the front bits and the rear pieces including subframe bushings. HP Autowerks is too far and it's a 2 day install so overnight stay not helping with saving money. |
Appreciate
0
|
02-24-2014, 05:18 PM | #10 |
Banned
1518
Rep 4,744
Posts
Drives: S65 1M Clone & E92 M3 4.6L
Join Date: Apr 2011
Location: San Francisco
|
HG motorsports is in San Diego - go there. Mike will take care of you there.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|