iCarbon Official Group Buy Thread!!

iCARBON DESIGN · 10-07-2009, 12:52 PM

Just to confirm with all of you that our toll free number is working and has been working.

Just to clear up any confusion below is our company info. All this info can also be found on our informational site www.icarbondesign.com.

Company name:
iCarbon Design Corp.

Address:
2655 Le Jeune Rd.
Coral Gables, FL 33134

Tel: 1.866.744.2272
Fax: 305.675.3914

Email us directly at sales@icarbondesign.com

If for any reason there is some delay in us PMing your back you can always email us directly or just speak to us personally.

-Mario

iCARBON DESIGN · 10-07-2009, 01:01 PM

Quote:

Originally Posted by onefastman

Sorry about that guys. I have been scamed before so I hope you understand why I am skeptical. However I am still on board for the rear diffuser, just not the mirror caps and wing. I was worried because I mismanaged my finances a little and $360 is a big deal for me (a student).

Not a problem onefastman, We have been in your position. Back in college i used to do the ol' "swipe and don't look back" philosophy. Except when the bill came the following month i knew why i was a business major not a philosophy...

Hope you enjoy the rear diffuser onefastman! and easy on the swiping...

Bullitt · 10-07-2009, 01:52 PM

Mario, do you know if the FMIC be any less accessible with the lip on?

iCARBON DESIGN · 10-07-2009, 03:03 PM

Quote:

Originally Posted by Bullitt

Mario, do you know if the FMIC be any less accessible with the lip on?

The front lip will not affect the FMIC. Airflow will remain the same due to the fact that the lip doesn't come up and interrupt the openings of the car.

Bullitt · 10-07-2009, 04:03 PM

Quote:

Originally Posted by iCARBON DESIGN

The front lip will not affect the FMIC. Airflow will remain the same due to the fact that the lip doesn't come up and interrupt the openings of the car.

For sure! But I meant about underneath access to it--if removal/entry of the FMIC would be affected or hindered in any way by the installed lip.

iCARBON DESIGN · 10-07-2009, 04:20 PM

Quote:

Originally Posted by Bullitt

For sure! But I meant about underneath access to it--if removal/entry of the FMIC would be affected or hindered in any way by the installed lip.

Bullit, the thing is that regardless if the front lip is installed or not you are going to have to remove the front bumper to install a new FMIC. The install process is no different with the lip on or off the front bumper.

infinitekidM2C · 10-07-2009, 04:24 PM

It's a front lip...goodness...the questions...

Bullitt · 10-07-2009, 04:56 PM

Quote:

Originally Posted by infinitekid2002

It's a front lip...goodness...the questions...

No doubt...and now I feel a lil' stupid for asking it.

Quote:

Originally Posted by iCARBON DESIGN

Bullit, the thing is that regardless if the front lip is installed or not you are going to have to remove the front bumper to install a new FMIC.

Just to clarify, the OEM FMIC (and another aftermarket one) can be uninstalled and installed without removing the bumper.

Quote:

Originally Posted by iCARBON DESIGN

The install process is no different with the lip on or off the front bumper.

Thanks! Simply wanted to know ahead of time in case it was different.

fmxomar · 10-07-2009, 08:14 PM

you guys dont have second thoughts about ICARBON they are 100% legit and are just here to serve us with the parts that everyone is asking for.
cant wait for final pics of the front lip

ki__ · 10-07-2009, 11:07 PM

Still haven't gotten pm'd back and its been around a week >.>

iCARBON DESIGN · 10-08-2009, 09:10 AM

Quote:

Originally Posted by BlacknRedi

Still haven't gotten pm'd back and its been around a week >.>

Hey BlacknRedi, your PM has been answered, it should bring you a big

zamm3k · 10-08-2009, 10:07 AM

Quote:

Originally Posted by iCARBON DESIGN

Hey BlacknRedi, your PM has been answered, it should bring you a big

iCarbon! Still waiting on you guys to respond my PM too

AchtungF80 · 10-08-2009, 10:21 AM

Quote:

Originally Posted by zamm3k

iCarbon! Still waiting on you guys to respond my PM too

Quote:

Originally Posted by iCARBON DESIGN

Just to confirm with all of you that our toll free number is working and has been working.

Just to clear up any confusion below is our company info. All this info can also be found on our informational site www.icarbondesign.com.

Company name:
iCarbon Design Corp.

Address:
2655 Le Jeune Rd.
Coral Gables, FL 33134

Tel: 1.866.744.2272
Fax: 305.675.3914

Email us directly at sales@icarbondesign.com

If for any reason there is some delay in us PMing your back you can always email us directly or just speak to us personally.

-Mario

According to google, Doral, FL is 24 min from Coral Gables....surprised you don't just drive up and ask them.

twenzel · 10-08-2009, 11:29 AM

Quote:

Originally Posted by onefastman

Sorry about that guys. I have been scamed before so I hope you understand why I am skeptical. However I am still on board for the rear diffuser, just not the mirror caps and wing. I was worried because I mismanaged my finances a little and $360 is a big deal for me (a student).

Not to get off topic here, but if you are a student and "$360 is a big deal", what are you doing with a $35-40k car??? lol

zamm3k · 10-08-2009, 01:02 PM

Quote:

Originally Posted by achtungE30

According to google, Doral, FL is 24 min from Coral Gables....surprised you don't just drive up and ask them.

As a matter of fact I've spoken to Mario before. And I've been in contact with him thru PM's. I, unfortunately, don't have much time to drive wherever I want. Evidently u don't know Miami. With traffic here those 24 minutes turn into 1 or 2 hours. Mind your own business. No offense.

onefastman · 10-08-2009, 02:03 PM

Obvieously it was a gift from my parents. However they do not pay for mods or fund my fun account so I have to work for that. I drive people around in a van to get extra cash, yippie..

Quote:

Originally Posted by twenzel

Not to get off topic here, but if you are a student and "$360 is a big deal", what are you doing with a $35-40k car??? lol

Qbone · 10-08-2009, 02:11 PM

Quote:

Originally Posted by onefastman

Obvieously it was a gift from my parents.

GOD i hate you!

lol

randomquickness · 10-08-2009, 02:15 PM

Quote:

Originally Posted by onefastman

Obvieously it was a gift from my parents. However they do not pay for mods or fund my fun account so I have to work for that. I drive people around in a van to get extra cash, yippie..

+1 for your parents!

back on topic now...I sure can't wait for those pics of the installed lip!

iCARBON DESIGN · 10-08-2009, 02:53 PM

You guys are nuts!

Quote:

Originally Posted by zamm3k

iCarbon! Still waiting on you guys to respond my PM too

zamm3k, Sorry you did not get a reply, we just sent you a PM go ahead and check it out. I can send you the confirmation if you want to change to the new finish.

onefastman · 10-08-2009, 03:52 PM

Sorry to keep buging you guys but my order is still not up and I want to make sure it is in for the close of the group buy. My order number was #33 and it needs to be reinstated.

iCARBON DESIGN · 10-08-2009, 03:57 PM

Quote:

Originally Posted by onefastman

Sorry to keep buging you guys but my order is still not up and I want to make sure it is in for the close of the group buy. My order number was #33 and it needs to be reinstated.

Im on it onefastman.

McReary · 10-08-2009, 04:19 PM

Quote:

Originally Posted by zamm3k

As a matter of fact I've spoken to Mario before. And I've been in contact with him thru PM's. I, unfortunately, don't have much time to drive wherever I want. Evidently u don't know Miami. With traffic here those 24 minutes turn into 1 or 2 hours. Mind your own business. No offense.

somebody's panties are TWISTED.

10-07-2009, 12:52 PM	#155
iCARBON DESIGN Lieutenant 61 Rep 400 Posts Drives: 135i Join Date: Jul 2009 Location: South Florida iTrader: (0)	Just to confirm with all of you that our toll free number is working and has been working. Just to clear up any confusion below is our company info. All this info can also be found on our informational site www.icarbondesign.com. Company name: iCarbon Design Corp. Address: 2655 Le Jeune Rd. Coral Gables, FL 33134 Tel: 1.866.744.2272 Fax: 305.675.3914 Email us directly at sales@icarbondesign.com If for any reason there is some delay in us PMing your back you can always email us directly or just speak to us personally. -Mario
	Appreciate 0 Quote

10-07-2009, 01:52 PM	#157
Bullitt Major 91 Rep 1,168 Posts Drives: 135i Join Date: Apr 2008 Location: SF Bay Area iTrader: (18) Garage List 2008 135i [0.00]	Mario, do you know if the FMIC be any less accessible with the lip on?
	Appreciate 0 Quote

10-07-2009, 04:24 PM	#161
infinitekidM2C Major General 4207 Rep 5,728 Posts Drives: 2019 M2 Competition Join Date: Nov 2007 Location: Orange County, CA iTrader: (4) Garage List 2019 M2 COMPETITION [9.50] 2008 135i (my old car) [7.39]	It's a front lip...goodness...the questions...
	Appreciate 0 Quote

10-07-2009, 08:14 PM	#163
fmxomar Major 94 Rep 1,245 Posts Drives: bmw 135i Join Date: Jun 2008 Location: san diego, ca iTrader: (15)	you guys dont have second thoughts about ICARBON they are 100% legit and are just here to serve us with the parts that everyone is asking for. cant wait for final pics of the front lip
	Appreciate 0 Quote

10-07-2009, 11:07 PM	#164
ki__ Brigadier General 409 Rep 3,479 Posts Drives: 19 M2C 6MT Join Date: May 2008 Location: Los Angeles, CA iTrader: (6) Garage List 2019 BMW F87 M2C [0.00]	Still haven't gotten pm'd back and its been around a week >.>
	Appreciate 0 Quote

10-08-2009, 03:52 PM	#174
onefastman Major General 159 Rep 5,689 Posts Drives: 2009 135i 2011 e92m dct Join Date: Sep 2009 Location: Earth iTrader: (15)	Sorry to keep buging you guys but my order is still not up and I want to make sure it is in for the close of the group buy. My order number was #33 and it needs to be reinstated.
	Appreciate 0 Quote