|
|
|
|
|
| 08-25-2014, 11:43 AM | #23 |
|
Captain
 
35
Rep 985
Posts |
^ I will be working on this in the next week.. Will order parts as I have a feeling I have the same issue.
great info BTW 
__________________
2006 330i E90 Sparkling Graphite- 2007 335i E92 JB ->2008 135i Montego Blue
|
|
Appreciate
0
|
| 02-01-2018, 01:52 AM | #24 |
|
Private First Class
 
33
Rep 119
Posts
Drives: 2013 135is M/T
Join Date: Sep 2016
Location: SoCal
|
I know this is a very old thread... but I'm having issues with my headlights here.
Had some headlight work done on my car and at some point the back cover was left loose. Driver side headlight works just fine, no sign of water damage Passenger side shows signs of water damage on the ballast and connector between the ballast and low beam I swapped the driver and passenger headlights, nothing turned on. So there seems to be an issue with the passenger side headlight, but also something else. Would that be the footwell module? |
|
Appreciate
0
|
| 02-19-2018, 09:47 AM | #25 |
|
New Member
3
Rep 9
Posts |
Change the control module and ballast, should do the trick. I also took a heat gun and dried the headlight out also. Had this happen to me after a car wash. I had installed aftermarket angel eyes and the back cover was not put back on correctly. Found the ballasts on eBay for $100, but had to buy oem control modules as I couldn’t find any on eBay. Expensive mistake.
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
