Installing Berk Race Exhaust - Hanger won't reattach

[LinkA8A0A]

Hey, just had a question for those who have installed aftermarket midpipes in their cars. I just picked up the berk race exhaust and everything was going smooth as could be until I tried to reconnect the double hump shaped hanger (with the bolt going through the middle) back around the aftermarket mid-pipes. I can't get the bolt to start. Has anyone had this same issue? If so, did you get a longer bolt or just remove the hanger altogether (cause I see that the top part of the hanger can be removed, too)? Any help is appreciated!

[Mtl135i]

The Berk mids come with a longer bolt for this area. Get yourself to the local hardware store and find a longer one. The specs can be found on berks instruction sheet. I believe it's an M6 bolt

[LinkA8A0A]

Originally Posted by Mtl135i

The Berk mids come with a longer bolt for this area. Get yourself to the local hardware store and find a longer one. The specs can be found on berks instruction sheet. I believe it's an M6 bolt

Exactly what I was looking for. Thanks a lot!