Sponsored by The Tire Rack

[klamchowder]

I searched the forum, but didn't have any luck finding anything straightforward.

For the summer I run the stock 215/40/18 front and 245/35/18 rear, but through the winter I've done a 225/40/18 square setup. What do you guys do in terms of tire pressure for the square setup on staggered wheels.

[MightyMouseTech]

I am running 205/50/17 square, and run stock pressures: 36f/39r.

[schmidtp]

I ran the same as stock as noted above also, I was on a completely square setup

[Gary@TireRack]

Originally Posted by klamchowder

I searched the forum, but didn't have any luck finding anything straightforward.

For the summer I run the stock 215/40/18 front and 245/35/18 rear, but through the winter I've done a 225/40/18 square setup. What do you guys do in terms of tire pressure for the square setup on staggered wheels.

You can use the same inflation pressure as you are using for your summer setup. Technically you could actually run a psi or two lower, but I would keep it the same.