04-04-2012, 03:35 PM | #2 |
Captain
57
Rep 820
Posts |
Install was easy. I bought a used n54 airbox as i didnt want to drill a hole in the factory one.
Basically drill a 2" hole in the airbox and use the supplied jbweld and attach the adapter kit and let it cure (i left it overnite). Dont drill the hole too low, else it wont clear the diverter valve. Other than that, its pretty straightforward and there should be a bunch of intake DIY floating around...remove cowl to remove airbox etc. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|