New Agency Power Intercooler Upgrade 16HP Gain Save $600

vividracing · 12-01-2009, 12:10 PM

Save $600 compared to the competition with the all new Agency Power Front Mount Intercooler Upgrade as seen on our Project 135I.

Special introductory offer expires 12/31/09.

The intercooler produces 16HP and over 20ft/lbs of torque as tested on our Mustang Dyno. A must have upgrade to keep you pulling power down the strip and track. Agency Power has been dedicated to producing quality performance parts for various makes and models.The Agency Power Intercooler kit for the 135i and 335i BMW's is no exception. This high quality front mount intercooler is designed to reduce the air temp of your turbocharged BMW. The front mount intercooler has a larger surface area to increase airflow and in turn, reduce the temperature of the compressed air. This reduced temperature results in a horsepower and torque gain.

With this larger more efficient intercooler, your tuner will have the ability to increase boost in some applications to futher increase the performance gains.

onefastman · 12-01-2009, 02:34 PM

Nice deal but how much cutting is necessiary and how hard was it to get the icarbon lip to stick with that huge thing in there? Also what are the specs and do you have pics of the core?

vividracing · 12-01-2009, 02:37 PM

Good questions. Minimal trimming required like all FMIC to the front inner center bumper. Everything else is a bolt on. The core is a bar and plate design. Much larger then OEM as pictured below. The iCarbon lip did need extra trimming since it pushes the lower undertray slightly down.

vividracing · 12-04-2009, 10:19 AM

The iCarbon guys got 1 on the way, new install pics and review shortly. We have them instock so call to order!

Jayock · 12-30-2009, 06:37 PM

Do you have the dyno results available before and after the IC install?

vividracing · 12-30-2009, 06:42 PM

View here - http://www.vividracing.com/catalog/a...8-p-82004.html

Jayock · 12-30-2009, 06:49 PM

Excellent. I assume this was on a tuned car, looks like a JB3 is on your project car. What map was that dyno on?

Also, do you have specs on dimensions and internal volume for this IC?

vividracing · 12-30-2009, 06:58 PM

Yes I have a JB3, but we still did a before and after run to show the power. As long as variables are kept constant, all that matters is the delta. 6.0" thick x 5.875" tall x 22.0" wide.

I have 3 instock right now. If you want to get one and do an install article, will give you further discount.

Jayock · 12-30-2009, 10:13 PM

PM sent.

vividracing · 02-05-2010, 12:34 PM

Bump - plenty more INSTOCK!

kirby135i · 04-08-2010, 10:29 PM

this still avail at this price?

12-01-2009, 12:10 PM	#1
vividracing 689 Rep 6,854 Posts Drives: E90 M3, F30 335i, F80 M3 Join Date: Aug 2006 Location: Arizona iTrader: (14)	New Agency Power Intercooler Upgrade 16HP Gain Save $600 Save $600 compared to the competition with the all new Agency Power Front Mount Intercooler Upgrade as seen on our Project 135I. Special introductory offer expires 12/31/09. The intercooler produces 16HP and over 20ft/lbs of torque as tested on our Mustang Dyno. A must have upgrade to keep you pulling power down the strip and track. Agency Power has been dedicated to producing quality performance parts for various makes and models.The Agency Power Intercooler kit for the 135i and 335i BMW's is no exception. This high quality front mount intercooler is designed to reduce the air temp of your turbocharged BMW. The front mount intercooler has a larger surface area to increase airflow and in turn, reduce the temperature of the compressed air. This reduced temperature results in a horsepower and torque gain. With this larger more efficient intercooler, your tuner will have the ability to increase boost in some applications to futher increase the performance gains. __________________ Travis Williams Shop ALL BMW G80 \| G82 Parts Here! 480.966.3040 ext 318 Travisw@vividracing.com PM, Email, or Call Directly for aggressive BMW Member Pricing Last edited by vividracing; 04-09-2010 at 02:38 PM..
	Appreciate 0 Tweet Quote

12-01-2009, 02:34 PM	#2
onefastman Major General 159 Rep 5,689 Posts Drives: 2009 135i 2011 e92m dct Join Date: Sep 2009 Location: Earth iTrader: (15)	Nice deal but how much cutting is necessiary and how hard was it to get the icarbon lip to stick with that huge thing in there? Also what are the specs and do you have pics of the core?
	Appreciate 0 Quote

12-01-2009, 02:37 PM	#3
vividracing 689 Rep 6,854 Posts Drives: E90 M3, F30 335i, F80 M3 Join Date: Aug 2006 Location: Arizona iTrader: (14)	Good questions. Minimal trimming required like all FMIC to the front inner center bumper. Everything else is a bolt on. The core is a bar and plate design. Much larger then OEM as pictured below. The iCarbon lip did need extra trimming since it pushes the lower undertray slightly down. __________________ Travis Williams Shop ALL BMW G80 \| G82 Parts Here! 480.966.3040 ext 318 Travisw@vividracing.com PM, Email, or Call Directly for aggressive BMW Member Pricing
	Appreciate 0 Quote

12-04-2009, 10:19 AM	#4
vividracing 689 Rep 6,854 Posts Drives: E90 M3, F30 335i, F80 M3 Join Date: Aug 2006 Location: Arizona iTrader: (14)	The iCarbon guys got 1 on the way, new install pics and review shortly. We have them instock so call to order! __________________ Travis Williams Shop ALL BMW G80 \| G82 Parts Here! 480.966.3040 ext 318 Travisw@vividracing.com PM, Email, or Call Directly for aggressive BMW Member Pricing
	Appreciate 0 Quote

12-30-2009, 06:37 PM	#5
Jayock Private 3 Rep 70 Posts Drives: 2009 135i Join Date: Aug 2009 Location: Denver, CO iTrader: (0)	Do you have the dyno results available before and after the IC install? __________________ Fun Toys -- 2009 BMW 135i--2002 Silverado 1500HD--1999 Honda CR250R--1998 Honda CR250R-- Racing -- Superbike: Suzuki GSX-R 1000 -- Supersport: Honda CBR-600RR -- Both have a ...few... mods Sponsors--Intelligent By Design, Faster Motosports, Michelin Tires, EBC Brakes, Vanmar Racing, Colorado Powersports, LevelOne Racing
	Appreciate 0 Quote

12-30-2009, 06:42 PM	#6
vividracing 689 Rep 6,854 Posts Drives: E90 M3, F30 335i, F80 M3 Join Date: Aug 2006 Location: Arizona iTrader: (14)	View here - http://www.vividracing.com/catalog/a...8-p-82004.html __________________ Travis Williams Shop ALL BMW G80 \| G82 Parts Here! 480.966.3040 ext 318 Travisw@vividracing.com PM, Email, or Call Directly for aggressive BMW Member Pricing
	Appreciate 0 Quote

12-30-2009, 06:49 PM	#7
Jayock Private 3 Rep 70 Posts Drives: 2009 135i Join Date: Aug 2009 Location: Denver, CO iTrader: (0)	Excellent. I assume this was on a tuned car, looks like a JB3 is on your project car. What map was that dyno on? Also, do you have specs on dimensions and internal volume for this IC? __________________ Fun Toys -- 2009 BMW 135i--2002 Silverado 1500HD--1999 Honda CR250R--1998 Honda CR250R-- Racing -- Superbike: Suzuki GSX-R 1000 -- Supersport: Honda CBR-600RR -- Both have a ...few... mods Sponsors--Intelligent By Design, Faster Motosports, Michelin Tires, EBC Brakes, Vanmar Racing, Colorado Powersports, LevelOne Racing
	Appreciate 0 Quote

12-30-2009, 06:58 PM	#8
vividracing 689 Rep 6,854 Posts Drives: E90 M3, F30 335i, F80 M3 Join Date: Aug 2006 Location: Arizona iTrader: (14)	Yes I have a JB3, but we still did a before and after run to show the power. As long as variables are kept constant, all that matters is the delta. 6.0" thick x 5.875" tall x 22.0" wide. I have 3 instock right now. If you want to get one and do an install article, will give you further discount. __________________ Travis Williams Shop ALL BMW G80 \| G82 Parts Here! 480.966.3040 ext 318 Travisw@vividracing.com PM, Email, or Call Directly for aggressive BMW Member Pricing
	Appreciate 0 Quote

12-30-2009, 10:13 PM	#9
Jayock Private 3 Rep 70 Posts Drives: 2009 135i Join Date: Aug 2009 Location: Denver, CO iTrader: (0)	PM sent. __________________ Fun Toys -- 2009 BMW 135i--2002 Silverado 1500HD--1999 Honda CR250R--1998 Honda CR250R-- Racing -- Superbike: Suzuki GSX-R 1000 -- Supersport: Honda CBR-600RR -- Both have a ...few... mods Sponsors--Intelligent By Design, Faster Motosports, Michelin Tires, EBC Brakes, Vanmar Racing, Colorado Powersports, LevelOne Racing
	Appreciate 0 Quote

02-05-2010, 12:34 PM	#10
vividracing 689 Rep 6,854 Posts Drives: E90 M3, F30 335i, F80 M3 Join Date: Aug 2006 Location: Arizona iTrader: (14)	Bump - plenty more INSTOCK! __________________ Travis Williams Shop ALL BMW G80 \| G82 Parts Here! 480.966.3040 ext 318 Travisw@vividracing.com PM, Email, or Call Directly for aggressive BMW Member Pricing
	Appreciate 0 Quote

04-08-2010, 10:29 PM	#11
kirby135i Lieutenant 15 Rep 506 Posts Drives: bmw Join Date: Jun 2009 Location: here iTrader: (1)	this still avail at this price?
	Appreciate 0 Quote