|
|
|
03-08-2009, 08:13 PM | #1 |
Private
2
Rep 84
Posts |
Meisterschaft 128/135i Promotional GB event.
Members, Here are the GB promotion details.
Limited to 5 complete sets only. First come first serve - no reserve. Product Info: http://gthaus.com/ehprice.php?selMak...=28&Submit.y=4 Option A. Section 1 (with performance resonator) + Rear GT unit (2x83mm Round tips) or Rear HP unit (2x83mm Round tips) Option B. Section 1 (without performance resonator) + Rear GT unit (2x83mm Round tips) or Rear HP unit (2x83mm Round tips) Retail Price: 2498.00 USD + Shipping For limited number of sets (5) only, GB Promo Price: 1598.00 USD + Shipping. Event Conditions: Since this is a promotional event, we have a few requests on our end. No worries, conditions are rather fun. Here they are. 1. You must wear small "GTHAUS" decals (Size 5x1 inch decals will be provided to you upon purchase) on your front / rear or side windows for Min 90 days. 2. You must take some photos or videos (of products or your vehicle during installation or after installation is complete: 10 photos/videos minimum) and share with GTHAUS and Forum fellow members. & Here's more: we will decide / pick out one best vehicle, out of photos and videos sent from you, and we will give out Kelleners Sport Shift Knob and Brake lever - Aluminum ($500 Worth) for absolutely "FREE" for 1 customer This will be one time offer, and you will not see this promotional prices direct from distributor again. Note: Local customers (chicago, IL), we will offer free installation. So, Let it begin: You can, call: 630.787.1600, email: info@gthaus.com, or PM to participate in this event. Thank you. Last edited by Meisterschaft; 03-08-2009 at 09:13 PM.. |
03-10-2009, 11:32 AM | #5 |
Private
2
Rep 84
Posts |
|
Appreciate
0
|
03-10-2009, 11:33 AM | #6 |
Private
2
Rep 84
Posts |
It was nice out last night,
so, we took some videos of our GTR. this thing has full Titanium system on it Here is the Meisterschaft GT sound ~! check it out: Last edited by Meisterschaft; 03-10-2009 at 12:42 PM.. |
Appreciate
0
|
03-10-2009, 03:49 PM | #8 | |
Private
2
Rep 84
Posts |
Quote:
where M3 uses 2 cannisters and 2 pipe layout. We have used 76mm titanium pipe for 1 series mufflers. Plasma welding techniques and bending are the same way as ones for M3. Here is a photo displaying : Ti unit VS SUS unit: |
|
Appreciate
0
|
03-10-2009, 03:54 PM | #9 |
Private
2
Rep 84
Posts |
here are some more Meisterschaft Titanium plasma welding photos:
Seriously, we take time to build our units - trying to make absolutly the best possible quality product exists. They are all Hand-plasma welded, we think of it, work of art. Each section piece is perfectly bent and welded to next one and on and on. For example, E92 M3 unit that you see below, there are more than 80 pcs of Titanium bent pipe sections welded together - pefectly within 1mm tolerance. Work of Art. FYI, outside of the pipe, you can see the plasma welding lines, inside the pipe, no worries, It is smooth as bent SUS pipe, so there is no restrictions or turbulance in exhaust flow. This is the Titanium system on E92 M3. |
Appreciate
0
|
03-10-2009, 05:04 PM | #10 | |
Captain
42
Rep 719
Posts |
Quote:
Will that fit with the Inside performance diffuser ? |
|
Appreciate
0
|
03-10-2009, 07:13 PM | #13 |
Private
2
Rep 84
Posts |
|
Appreciate
0
|
03-10-2009, 08:36 PM | #15 |
Brigadier General
829
Rep 4,190
Posts |
|
Appreciate
0
|
03-10-2009, 08:42 PM | #16 |
Brigadier General
829
Rep 4,190
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|