|
|
|
02-25-2020, 04:42 PM | #1 |
Private
33
Rep 82
Posts |
Best Engine Mounts and Transmission Mount Combo
Trying to get your guys input on the best engine and transmission mount combo for a weekend/track 135i. I almost went with the 034 Motorsport but I've been seeing a lot of negative feedback on them.
|
02-25-2020, 05:10 PM | #3 |
Private
33
Rep 82
Posts |
|
Appreciate
0
|
02-25-2020, 05:14 PM | #4 |
Colonel
828
Rep 2,232
Posts |
|
Appreciate
2
nieves.e8233.00 spidertri402.00 |
02-25-2020, 09:58 PM | #5 |
First Lieutenant
219
Rep 361
Posts |
I did the E46 M3 transmission mounts and found them a great improvement for a dual duty car: https://www.1addicts.com/forums/show...5&postcount=13
-Mark
__________________
2011 BMW 128i - Check out my STX build thread!
|
Appreciate
2
nieves.e8233.00 crowtrobot365.50 |
02-26-2020, 12:18 PM | #6 |
Captain
561
Rep 755
Posts |
Rogue Engineering trans mounts....very nice for DD also.
|
Appreciate
1
nieves.e8233.00 |
02-28-2020, 11:28 AM | #7 |
Sideways and Smiling
3027
Rep 2,860
Posts
Drives: In Exuberance
Join Date: Mar 2017
Location: Rosamond, CA USA
|
I wouldn't recommend my motor mounts, unless you're hardcore about feeling EVERYTHING going on up front. They're AKG 75D poly mounts. Lovely product, and the car feels amazing. It's just really brutal if you aren't moving.
I have E46 M3 trans mounts, and they're pretty good. Shifter doesn't move around so much during cornering, but it did (by itself) add a bit of chatter noise.
__________________
2012 BMW 328i 6-Speed Wagon | Deep Sea Blue with Grey Dakota Leather | Manual Swap, 330i Intake + Tune, 3.15 Helical LSD, Öhlins R&T
(SOLD) 2009 BMW 128i 6-Speed Coupé | Monaco Blue with Black Sensatec | chris_flies' 128i thread |
Appreciate
1
nieves.e8233.00 |
02-28-2020, 12:53 PM | #8 |
Private
33
Rep 82
Posts |
|
Appreciate
0
|
02-28-2020, 03:56 PM | #9 |
Captain
561
Rep 755
Posts |
|
Appreciate
0
|
03-12-2020, 04:30 AM | #11 |
Captain
113
Rep 682
Posts |
Solid engine, trans, diff and RSBs.
See my last couple posts: https://www.m3post.com/forums/showth...7#post25732457 https://www.m3post.com/forums/showth...6#post25288616 The solid rear diff mounts install was delayed again - should be in by the end of this month. The solid trans mounts were removed but will go back in, probably mid-April. |
Appreciate
0
|
03-13-2020, 11:51 AM | #12 |
Private
33
Rep 82
Posts |
Appreciate all the feedback! I went with turner motor mounts and rouge engineering transmission mounts! I have a set off condor speed transmission mounts as well, if anyone would like to buy them off me.
|
Appreciate
0
|
03-13-2020, 02:04 PM | #13 |
Second Lieutenant
176
Rep 215
Posts |
I am running the turner hybrid motor mounts. It’s rough at idle, but once the car gets going the vibration is not really noticeable over OEM mounts. You do pick up a little more engine noise. I ended up setting my idle at 950. If I am stuck at a long traffic light, I’ll put my dct in neutral just to limit the car shaking so much.
|
Appreciate
1
nieves.e8233.00 |
05-07-2020, 06:18 AM | #14 |
Captain
113
Rep 682
Posts |
Further update:
I finally had the solid diff mounts installed. No noticeable increase in NVH but I already had a solid diff brace installed, which at the time did make diff whine noticeable, which is something I've learned to live with and ignore. Summary of installed solid mounts:
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|