|
|
|
01-14-2018, 03:13 PM | #1 |
Lieutenant
129
Rep 559
Posts
Drives: ///M3
Join Date: Jan 2009
Location: NYC
|
FS: Original P3 Boost Gauge (non-OBD)
*******SOLD********* Sold my 135i a few months ago, and while going through my extra parts bin found this. It's the original P3 Gauge with analog boost measurement and plug and play for power. This one does NOT connect to the OBD, so it only tells you boost (and max boost). Vent, gauge, and accessories in good used condition (see pics). There are a few marks on the bottom of the vent from when I removed it. The install is plug and play, reversible, but does require removing some trim panels. When I sold the car, I actually had the later OBD version of the gauge, and I found this one is much better if you run any type of piggy-back tune. This includes the vent, the tubing for vacuum/boost line connection, and the wire harness (everything you need). I think some of the stuff in the picture is actually not required and left over parts from my OBD version. I'm in NY, but will ship at buyer's expense. Looking to get $200, but will entertain reasonable offers. Tim
__________________
M3 6MT SmTo/CS ZCP
135i MT JB/CR ///MSport - Gone Last edited by timhatimay; 02-09-2018 at 07:53 PM.. Reason: I noticed some marks on the vent after I posted the pics. I checked the vent and they are there, so I updated the post.. |
01-16-2018, 08:59 PM | #3 |
First Lieutenant
188
Rep 327
Posts |
|
Appreciate
0
|
01-17-2018, 08:24 AM | #4 |
Captain
263
Rep 620
Posts
Drives: E90 335XI MSport, S2000
Join Date: Dec 2016
Location: Waterford, MI
|
Lol I was looking for one of these forever because the OBD one was interfering with the JB4.
|
Appreciate
0
|
01-19-2018, 06:10 PM | #5 |
Lieutenant
129
Rep 559
Posts
Drives: ///M3
Join Date: Jan 2009
Location: NYC
|
bumpity...this is better than OBD if you are tuned, because it doesn't cross-mojonate with your piggyback CAN signals!
__________________
M3 6MT SmTo/CS ZCP
135i MT JB/CR ///MSport - Gone |
Appreciate
0
|
01-28-2018, 06:16 PM | #6 |
Lieutenant
129
Rep 559
Posts
Drives: ///M3
Join Date: Jan 2009
Location: NYC
|
Bump. Price drop $175 shipped in US. It is sitting in my dining room and I want it gone!
|
Appreciate
0
|
01-29-2018, 06:33 PM | #8 |
Lieutenant
129
Rep 559
Posts
Drives: ///M3
Join Date: Jan 2009
Location: NYC
|
Very good question...I didn't realize until you asked that it is not as easy as the n54. In essence you just need a boost measurement somewhere (just like any analog boost gauge).
For the n54 it is plug and play and you tap a vacuum line on the diverter valves. For n55, I am not an expert. It looks like you need to either tap into the charge pipe somewhere (e.g., a meth bung on the charge pipe) or you would need to use an adapter on one of the sensors. After a quick search, these look like they would provide a location to tap for boost/vacuum measurement: https://www.turnermotorsport.com/p-3...SABEgLQCvD_BwE https://www.dinancars.com/product/dt...ies=&mid=135i/ There are probably other options as well, and I'm not familiar with how easy/hard the above adapters are to install. These are not included in my sale. Tim
__________________
M3 6MT SmTo/CS ZCP
135i MT JB/CR ///MSport - Gone |
Appreciate
0
|
02-04-2018, 09:56 AM | #10 |
Lieutenant
129
Rep 559
Posts
Drives: ///M3
Join Date: Jan 2009
Location: NYC
|
bump
__________________
M3 6MT SmTo/CS ZCP
135i MT JB/CR ///MSport - Gone |
Appreciate
0
|
02-09-2018, 07:52 PM | #11 |
Lieutenant
129
Rep 559
Posts
Drives: ///M3
Join Date: Jan 2009
Location: NYC
|
Sold!
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|