Procede V3 Rev.I PNP Tune for 135 & 335i

Sparky66 · 02-22-2009, 05:42 AM

This Rev.I unit has been in my car for a year now and has performed brilliantly. I'm selling due to the fact that I'm upgrading to the Rev.II which has built in O2 Sim for people running Catless Downpipes. There is no running differences between either revisions and both use the exact same maps/software. Both provide identical results and due to fact that I'm anal about having the latest revision.........I'll be taking a big hit in price for this upgrade disease. All I want to do is recover some of the cost of the upgrade to Rev.II which was $1000 aud.

If you are interested in having a totally reliable and safe tune that increases horsepower from 300hp flywheel (270 wheel hp) to approximately 400hp Flywheel (350 wheel hp), then this tuning system is the best solution for your 2006-2009 335i BMW.
It will not dissapoint as I'm sure you will notice from your very first drive - impressive accelleration and very, very smooth with no "turbo lag"...period. Works equally best on both the Steptronic Auto or Manual transmissions as both are catered for. This Vishnutuning Procede is the exact same tune which gave the 335i a win at the 2007 WPS 12 Hour Showroom Enduro Race contested at Mount Panorama in Bathurst.

The tune comes with 1 x V3.2 Procede Unit, 1 x Plug' n' Play Harness, Bypass plugs, 1 x CD based video install instructions/Software and 2 x Keyring Remote Controls to switch between 'Valet' mode and Map 1 and 2. i.e. (Low boost and High Boost).

It offers 4 Stages of various maps, depending on if you are completely stock or what ever future performance add-ons you may fit to your car........exhaust system, air intake, downpipes, aftermarket intercooler etc..
Each stage increases HP/TQ dependant on supporting mods in the range from 340hp to 400hp at the wheels on 98 RON octane fuel. For the strict only racers out there that can occasionally get and use unleaded"Race Fuels" (104-109+ RON), Vishnutuning has specialised maps that can take advantage of the higher octane's performance output. Expect 420HP / 400TQ at the wheels. Too extreme for me and I'm sure most here, but it shows how flexible the Procede unit is in being able to adapt to various demands and needs of users out there.

Depending on which Stage (0-4) is used, expect 0-100km/h to improve from approx. 5.2 secs to +4.0-4.3 secs with 400m times from the factory 13.5 secs to achievable 12.5 secs and a best of high 11 secs. Software allows you the option to enable/disable speed limiter for top end speed. This is a seriously fast tuning device which improves driveability no end with improved Torque from idle and off boost cruising (very noticeable). If driven normally it feels no different to your factory spec car with the added bonus of substantially improved fuel economy.

The Procede unit integrates with the factory ecu system and is hidden from view. It remains diagnostically invisible by usings the appropriate free maps which are periodically downloaded via the Vishnutuning internet site.......... more info and support will be provided by me upon purchase.

For the enthusiast who likes to continually improve and monitor their cars performance, this tune allows for computer based datalogging and future map upgrading via the included "Procede Reader" software program. Vishnutuning can also provide help and advise by sending them a datalog run at their request via a support call back email system on their site.

I will ship next day anywhere in Australia upon payment via direct deposit.

All interested parties, send me a PM via this forum or email me on:
tanc1@optusnet.com.au

Sparky66 · 02-28-2009, 02:38 AM

Open to offers.............. You might be surprised.

Just PM me.

2bob · 03-01-2009, 04:37 AM

Quote:

Originally Posted by Sparky66

Open to offers.............. You might be surprised.

Just PM me.

PM sent suprise me

Zuzu · 03-01-2009, 04:40 AM

LOL...Surprise Bob...

2bob · 03-04-2009, 02:15 AM

Deal done

Zuzu · 03-04-2009, 04:50 AM

Well done Bob..

WAY · 03-04-2009, 06:32 AM

2Bob, did you check if this works with V.81?

Sparky66 · 03-05-2009, 10:52 AM

I think you mean the latest ECU, which in Bob's case, is the MSD81. The Procede V3 has always been compatible with both MSD80 and 81 with all previous and current factory software upgrades. Vishnu Tuning has released Firmware/Map updates to the Procede aided by their own vehicle development of the N54 engine, based on always running the latest BMW software and all ECU upgrades (MSD80/81).
In any case if his car was to have any issues he would have the full support of the Vishnu team and the local Sydney Procede guys. Updating the free maps and firmware is as easy as downloading the software via the internet and uploading them to the Procede via a Serial to USB cable hidden in the fuse compartment behind the glove box........too easy.

WAY,
how has the Active Autowerke piggyback worked out for you?
Did you ever look into the Procede as an alternative?

Sparky66 · 03-12-2009, 10:06 AM

2bob,
has decided to purchase new. JB3 I think.
For anyone interested it's still available.

Joe S · 03-23-2009, 01:26 AM

Does anyone know where I can purchase JB3 and have it installed in Melbourne???? Prepared to pay for installation...

WOPALX · 03-23-2009, 05:30 AM

Quote:

Originally Posted by Joe S

Does anyone know where I can purchase JB3 and have it installed in Melbourne???? Prepared to pay for installation...

Go proceed and I should be able to hook you up with some VIC users to help with install. Much better features and the new canbus interface really makes it much more user friendly.

e90 FI section for information.

02-22-2009, 05:42 AM	#1
Sparky66 Major 58 Rep 1,230 Posts Drives: 335 E92 Coupe. Jet Black. Join Date: Feb 2007 Location: Sydney, Australia iTrader: (0)	Procede V3 Rev.I PNP Tune for 135 & 335i This Rev.I unit has been in my car for a year now and has performed brilliantly. I'm selling due to the fact that I'm upgrading to the Rev.II which has built in O2 Sim for people running Catless Downpipes. There is no running differences between either revisions and both use the exact same maps/software. Both provide identical results and due to fact that I'm anal about having the latest revision.........I'll be taking a big hit in price for this upgrade disease. All I want to do is recover some of the cost of the upgrade to Rev.II which was $1000 aud. If you are interested in having a totally reliable and safe tune that increases horsepower from 300hp flywheel (270 wheel hp) to approximately 400hp Flywheel (350 wheel hp), then this tuning system is the best solution for your 2006-2009 335i BMW. It will not dissapoint as I'm sure you will notice from your very first drive - impressive accelleration and very, very smooth with no "turbo lag"...period. Works equally best on both the Steptronic Auto or Manual transmissions as both are catered for. This Vishnutuning Procede is the exact same tune which gave the 335i a win at the 2007 WPS 12 Hour Showroom Enduro Race contested at Mount Panorama in Bathurst. The tune comes with 1 x V3.2 Procede Unit, 1 x Plug' n' Play Harness, Bypass plugs, 1 x CD based video install instructions/Software and 2 x Keyring Remote Controls to switch between 'Valet' mode and Map 1 and 2. i.e. (Low boost and High Boost). It offers 4 Stages of various maps, depending on if you are completely stock or what ever future performance add-ons you may fit to your car........exhaust system, air intake, downpipes, aftermarket intercooler etc.. Each stage increases HP/TQ dependant on supporting mods in the range from 340hp to 400hp at the wheels on 98 RON octane fuel. For the strict only racers out there that can occasionally get and use unleaded"Race Fuels" (104-109+ RON), Vishnutuning has specialised maps that can take advantage of the higher octane's performance output. Expect 420HP / 400TQ at the wheels. Too extreme for me and I'm sure most here, but it shows how flexible the Procede unit is in being able to adapt to various demands and needs of users out there. Depending on which Stage (0-4) is used, expect 0-100km/h to improve from approx. 5.2 secs to +4.0-4.3 secs with 400m times from the factory 13.5 secs to achievable 12.5 secs and a best of high 11 secs. Software allows you the option to enable/disable speed limiter for top end speed. This is a seriously fast tuning device which improves driveability no end with improved Torque from idle and off boost cruising (very noticeable). If driven normally it feels no different to your factory spec car with the added bonus of substantially improved fuel economy. The Procede unit integrates with the factory ecu system and is hidden from view. It remains diagnostically invisible by usings the appropriate free maps which are periodically downloaded via the Vishnutuning internet site.......... more info and support will be provided by me upon purchase. For the enthusiast who likes to continually improve and monitor their cars performance, this tune allows for computer based datalogging and future map upgrading via the included "Procede Reader" software program. Vishnutuning can also provide help and advise by sending them a datalog run at their request via a support call back email system on their site. I will ship next day anywhere in Australia upon payment via direct deposit. All interested parties, send me a PM via this forum or email me on: tanc1@optusnet.com.au Last edited by Sparky66; 03-12-2009 at 10:08 AM..
	Appreciate 0 Tweet Quote

02-28-2009, 02:38 AM	#2
Sparky66 Major 58 Rep 1,230 Posts Drives: 335 E92 Coupe. Jet Black. Join Date: Feb 2007 Location: Sydney, Australia iTrader: (0)	Open to offers.............. You might be surprised. Just PM me.
	Appreciate 0 Quote

03-01-2009, 04:40 AM	#4
Zuzu Major General 2816 Rep 7,637 Posts Drives: M2C HS 6MT Join Date: Mar 2008 Location: Sydney Australia iTrader: (0)	LOL...Surprise Bob...
	Appreciate 0 Quote

03-04-2009, 02:15 AM	#5
2bob Second Lieutenant 6 Rep 264 Posts Drives: AW white135 Join Date: Jun 2008 Location: bilgola plateau NSW australia iTrader: (0)	Deal done
	Appreciate 0 Quote

03-04-2009, 04:50 AM	#6
Zuzu Major General 2816 Rep 7,637 Posts Drives: M2C HS 6MT Join Date: Mar 2008 Location: Sydney Australia iTrader: (0)	Well done Bob..
	Appreciate 0 Quote

03-04-2009, 06:32 AM	#7
WAY Brigadier General 458 Rep 4,822 Posts Drives: Fast ones Join Date: Jul 2007 Location: Melbourne, Australia iTrader: (0)	2Bob, did you check if this works with V.81?
	Appreciate 0 Quote

03-05-2009, 10:52 AM	#8
Sparky66 Major 58 Rep 1,230 Posts Drives: 335 E92 Coupe. Jet Black. Join Date: Feb 2007 Location: Sydney, Australia iTrader: (0)	I think you mean the latest ECU, which in Bob's case, is the MSD81. The Procede V3 has always been compatible with both MSD80 and 81 with all previous and current factory software upgrades. Vishnu Tuning has released Firmware/Map updates to the Procede aided by their own vehicle development of the N54 engine, based on always running the latest BMW software and all ECU upgrades (MSD80/81). In any case if his car was to have any issues he would have the full support of the Vishnu team and the local Sydney Procede guys. Updating the free maps and firmware is as easy as downloading the software via the internet and uploading them to the Procede via a Serial to USB cable hidden in the fuse compartment behind the glove box........too easy. WAY, how has the Active Autowerke piggyback worked out for you? Did you ever look into the Procede as an alternative? Last edited by Sparky66; 03-08-2009 at 06:10 AM..
	Appreciate 0 Quote

03-12-2009, 10:06 AM	#9
Sparky66 Major 58 Rep 1,230 Posts Drives: 335 E92 Coupe. Jet Black. Join Date: Feb 2007 Location: Sydney, Australia iTrader: (0)	2bob, has decided to purchase new. JB3 I think. For anyone interested it's still available. Last edited by Sparky66; 03-18-2009 at 02:33 AM..
	Appreciate 0 Quote

03-23-2009, 01:26 AM	#10
Joe S Lieutenant 151 Rep 410 Posts Drives: E92 M3 Competition Package Join Date: Sep 2008 Location: Melbourne, Australia iTrader: (0)	Does anyone know where I can purchase JB3 and have it installed in Melbourne???? Prepared to pay for installation...
	Appreciate 0 Quote