|
|
|
11-25-2012, 06:24 AM | #1 |
Brigadier General
1836
Rep 4,203
Posts |
Getting universal remote to work
Good day guys,
I have a 2009 128i and am slightly confused on how to get the universal remote programed. I was in a condo prior so never had to program it. Must I do the full process in part 1 with the hand held prior to doing the unit learn in part 2? Does someone have a clearer description? I am not the swiftest when it comes to electronics. Thanks for your help Eric |
11-25-2012, 08:51 AM | #2 |
Lieutenant
18
Rep 439
Posts |
If you are referring to alternating-code remotes (which most all garage door remotes are now), then yes, you must program the mirror with the code prior to programming the door opener.
|
Appreciate
0
|
11-25-2012, 09:07 AM | #3 |
First Lieutenant
9
Rep 316
Posts |
I believe you have to. At least I had to in my 2012.
__________________
Deutsche Bahn, DB | Österreichische Bundesbahnen, ÖBB | Schweizerische Bundesbahnen, SBB
|
Appreciate
0
|
11-25-2012, 09:27 AM | #4 |
Captain
472
Rep 778
Posts |
i believe you need to hold the garage remote up to the mirror, hold the desired button down on the mirror for five seconds. when it flashes press the button on the garage remote. the remote will link with mirror.
|
Appreciate
0
|
11-25-2012, 10:12 AM | #5 |
Captain
35
Rep 753
Posts |
Look in your manual the directions are in there. One nice thing is all home link openers are the same so the process to program is the same mid you've lost your manual you can look up homelink online and should be able to find the directions.
|
Appreciate
0
|
11-25-2012, 12:27 PM | #6 |
I want to drive a Zamboni
1126
Rep 5,552
Posts
Drives: 13 E93 M3 18 F80 M3 16 K71
Join Date: Mar 2006
Location: Monte Sereno, CA
|
There is a button on the main unit which you need to reset first then sync the remote on the mirror.
__________________
18 F80 Imola Red 6MT
16 K71 F800GT Montego Blue 13 E93 M3 Melbourne Red 2000 E46,2006 E90,09 E82,13 E93 328i,14 F30 335i,18 F80 M3 My next vehicle would be a Zamboni |
Appreciate
0
|
11-27-2012, 04:17 AM | #7 |
Brigadier General
1836
Rep 4,203
Posts |
Thanks for the feedback, did the full process first with the handheld then with the learn button and it worked. Have not had luck with the community gate access remote though. Must be a different format.
1addits |
Appreciate
0
|
11-27-2012, 10:40 AM | #8 | |
Private
0
Rep 81
Posts |
Quote:
You can get to the video instructions - log into BMW USA -www.bmwusa.com. You will need your VIN to create an account. This video also may be on youtube, never looked. Once you log on and create an account your car will appear and on the bottom of the home page for that car a series of video tutorials are available-just follow the links. The garage door opener is one. I-drive, Nav and entertainment are others. To do the programming -follow below-the sequence. Press the outer 2 buttons on the mirror until the LED light flashes quickly - can take up to 30 seconds - car must be on. Now Press Button 1 and your remote opener at the same - hold until the LED light flashes quickly -should be 10-20 seconds-can take longer depending on your brand of door opener. Also if you are doing this on a bright sunny day it is sometimes hard to see the flashing LED in the mirror. Now you must press the learn button on your opener in your garage-(rolling code security causes this process.) It may be good to use a helper if you have a long distance or the learn button is hard to reach. You now have 30 seconds - go back to the car. Press the Mirror button (the one which you want to open the door) 3 times in sequence. The LED will flash - hold it 2 to 3 seconds per depression. The buttons can be programmed in this manner for a second or third door and perhaps a remote light - depending on your make and model. The mirror opening button will now work-it will only function when the car is on-engine running. Also unlike your loose remote you need to hold the button for about 2-3 seconds for the door to open/close. It can up to 300 feet away-much further than the loose control - thus I think BMW wants to make sure you want to use the open/close - thus a slight delay-longer depression on the switch. This is in the owner's manual but it is not explained very well. When I watched the video I figured it out and re read the manual to get the steps. |
|
Appreciate
0
|
12-24-2012, 06:03 PM | #9 |
Enlisted Member
5
Rep 42
Posts |
Thanks for this! the fact that you have to teach the homelink to be a remote and THEN bind it with the receiver was throwing me off.
You made it simple! |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|