New Resource Page for JB3 Software/Firmware!

[Mike@N54Tuning.com]

Page has been updated with the latest Software - 031610 and the latest Firmware 032210.

Enjoy


Just wanted to let the community know I have finally constructed a page where you can download the latest firmware and software for the JB3. Check back often as the page will be update with the latest firmware and software when available This should make it easier for everybody to stay up to date with the latest and greatest from the JB3 platform.

JB3 Software/Firmware Download Page

Thanks
Mike

[BroDoze]

Thanks! Go Terry!

[TunedM2C]

Cool. I need to check which board version I have.

[MadMan77]

Thanks Mike. Even though I will still check the forum for information it is good to know there is somewhere else to grab the files from.

[Mike@N54Tuning.com]

Originally Posted by MadMan77

Thanks Mike. Even though I will still check the forum for information it is good to know there is somewhere else to grab the files from.

Thanks.. I figured it would be a good idea to compile all the software in one easy to access page.

Mike

[timhatimay]

Sorry for the dumb question Mike, but...

If you are currently running 1.4, and have a 2.0 chip is this a direct swap? Do you need to do any firmware/software upgrades. I have the Db9/USB cable from your site...what would need to be done to run 2.0?

If I wanted to update a 2.0 chip if something post 2/17 comes out, what upgrades will be needed at this point, and how do you go about doing them.

Thanks,

Tim

[Mike@N54Tuning.com]

If you are running 1.4 then the first upgrade has to be done via the chip burner or chip swap. Subsequent upgrades can be done via the USB cable. The reason for this is that the instructions to communicate via the USB need to be loaded on the JB3 first and the only way to do this is with a direct chip swap.

Mike

Originally Posted by timhatimay

Sorry for the dumb question Mike, but...

If you are currently running 1.4, and have a 2.0 chip is this a direct swap? Do you need to do any firmware/software upgrades. I have the Db9/USB cable from your site...what would need to be done to run 2.0?

If I wanted to update a 2.0 chip if something post 2/17 comes out, what upgrades will be needed at this point, and how do you go about doing them.

Thanks,

Tim

[Papito135]

Is it mac compatible? Can the JB3 be updated using a mac?

[Mike@N54Tuning.com]

Originally Posted by Papito135

Is it mac compatible? Can the JB3 be updated using a mac?

I run it on my mac but not natively. You have to use virtualization and run windows.

Mike

[Mike@N54Tuning.com]

Page has been updated with the latest Software - 031610 and the latest Firmware 032210.

Enjoy