What size is the wheel bore on our 1 series?

texasmojo · 08-28-2010, 08:02 PM

I found some beyern wheels going pretty cheap locally and in the description they say hub 72.6. Would these fit the wheel bore from my 128i?

larryn · 08-28-2010, 08:06 PM

Wheels for our cars need 5x120 pattern with a 72.6 bore.

texasmojo · 08-28-2010, 08:13 PM

Quote:

Originally Posted by larryn

Wheels for our cars need 5x120 pattern with a 72.6 bore.

Thanks alot for the quick response. The rims are 18x8.5 offset 40mm do you think they would fit in the front?

larryn · 08-28-2010, 08:26 PM

Quote:

Originally Posted by texasmojo

Thanks alot for the quick response. The rims are 18x8.5 offset 40mm do you think they would fit in the front?

Sure, but the tire you put on it may not make it fit.

I would suggest nothing larger than a 225, or you'll need a spacer. Also, larger than a 225, and you'll run the risk of needing camber or a fender roll.

andnkuhn · 01-27-2012, 01:47 PM

Quote:

Originally Posted by larryn

Sure, but the tire you put on it may not make it fit.

I would suggest nothing larger than a 225, or you'll need a spacer. Also, larger than a 225, and you'll run the risk of needing camber or a fender roll.

Is this true of just the 128 or would be apply to the 135i also. Could the 135 go bigger than 225 you think

08-28-2010, 08:02 PM	#1
texasmojo Second Lieutenant 13 Rep 223 Posts Drives: 2008 128i automatic Join Date: Aug 2010 Location: DFW Texas, USA iTrader: (0)	What size is the wheel bore on our 1 series? I found some beyern wheels going pretty cheap locally and in the description they say hub 72.6. Would these fit the wheel bore from my 128i?
	Appreciate 0 Tweet Quote

08-28-2010, 08:06 PM	#2
larryn Lieutenant General 2148 Rep 10,176 Posts Drives: '97 332ti, '21 X5 45e, '16 GT4 Join Date: May 2005 Location: Seattle iTrader: (2)	Wheels for our cars need 5x120 pattern with a 72.6 bore.
	Appreciate 0 Quote