PYSpeed.com | Carbon Fiber Fabric (3 colors to choose) *$40 Shipped* - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

Eric@PYSpeed.com · 05-21-2009, 02:18 PM

Join the Car Mod Sensation: PYSpeed is proud to bring Carbon Fiber Fabric to 1Addicts members with 3 exciting colors (Black, Charcoal, Titanium/$5 more). This is for people who are interested in DIYing their interior trims to a Carbon Fiber look. It is the newest type of carbon fiber interior. No, it's not your typical CF overlay nor is it vinyl. This is actual fabric showcasing a CF based weave to allow the trim to breathe even better than leather.

Click for the DIY Guide

CF Fabric prides itself of the following:
-Extended Longevity
-Dry Carbon Effect
-OE Quality Finish
-Water Resistant
-Stain Resistant
-Crack Resistant

CF Fabric is selling by yard (52" x 36") at **$40 shipped**. Three different color are in stock right now, BLACK, CHARCOAL and *TITANIUM/$45 shipped*). You can paypal us at Sales@PYSpeed.com or Order Directly Online. Thanks for your time. =)

* Shipping Quote: Quotes for US Mainland. Please email for the cheapest possible way to get one of these items shipped to your door if you are in Hawaii, Alaska, Puerto Rico, Canada, and other International countries.
* California Residents: 9% CA Sales Tax is applicable.

Eric@PYSpeed.com · 05-22-2009, 10:19 AM

Thanks Stan for the quick DIY picture. This took him just "5 mins".
For $40, why not give it a shot, make your car stand out from the crowd with this good bang for the buck mod.

Eric@PYSpeed.com · 05-24-2009, 07:50 PM

All orders shipped out, remember to post pictures here after your DIY projects.

Thanks Guys!

Eric@PYSpeed.com · 05-26-2009, 03:29 AM

Just finish processing orders going to Australia and HK, thanks for the orders guys. =)

BSM 135i · 05-29-2009, 04:32 AM

i got my fabric from Euro-Dyne but i highly recommend this fabric! it takes time and a little work but the outcome is worth every bit and is way better than spending $300 to get it wrapped somewhere else. i'm working on wrapping my trim right now and here's what i got done so far. it is black cf fabric btw...

+85743895734857 on this fabric

arrutled · 05-29-2009, 06:38 AM

got any installed pictures of titanium?

Eric@PYSpeed.com · 05-29-2009, 01:06 PM

Quote:

Originally Posted by arrutled

got any installed pictures of titanium?

Here is one..

Menace · 05-29-2009, 04:30 PM

How is this applied? Is there a pressure sensitive adhesive backing? Or do i apply the adhesive myself?

1LazyBmw · 05-29-2009, 04:48 PM

Quote:

Originally Posted by BSM 135i

i got my fabric from Euro-Dyne but i highly recommend this fabric! it takes time and a little work but the outcome is worth every bit and is way better than spending $300 to get it wrapped somewhere else. i'm working on wrapping my trim right now and here's what i got done so far. it is black cf fabric btw...

+85743895734857 on this fabric

oooo looks good wish I had the time and effort to do that myself lol...

Eric@PYSpeed.com · 05-29-2009, 05:04 PM

Quote:

Originally Posted by Menace

How is this applied? Is there a pressure sensitive adhesive backing? Or do i apply the adhesive myself?

It's put together by using 3M super 77 adhesive from home depot. It's really simple and takes little time. The finishing result is incredible.

arok · 05-29-2009, 06:05 PM

Quote:

Originally Posted by BSM 135i

i got my fabric from Euro-Dyne but i highly recommend this fabric! it takes time and a little work but the outcome is worth every bit and is way better than spending $300 to get it wrapped somewhere else. i'm working on wrapping my trim right now and here's what i got done so far. it is black cf fabric btw...

+85743895734857 on this fabric

one note though, I'd probably wrap the different sides with opposing patterns instead of matching, since it's not goign to look right. does that make sense?

arrutled · 05-30-2009, 09:52 AM

Quote:

Originally Posted by Eric@PYSpeed.com

Here is one..

Hard to tell what that would look like installed. I gotta get rid of my piano black though. It is glaring sun in my eyes like woah! What would you reccommend on black interior for a lil pop?

Eric@PYSpeed.com · 05-30-2009, 01:06 PM

Quote:

Originally Posted by arrutled

Hard to tell what that would look like installed. I gotta get rid of my piano black though. It is glaring sun in my eyes like woah! What would you reccommend on black interior for a lil pop?

Charcoal one would be really clean looking if it's black interior. However if you really want to stand out, titanium is definitely the color to go.

Eric ~

Upgrade+ · 06-01-2009, 02:51 PM

I need more details on how to work the install. I would like to order, but I want to know what I'm getting into. Any good DIY on the process? Also, how durable and lasting is the material? Will it start to curl off after a few years (like wall paper)? I would hate to go through the work, just to have it start peeling or curling off after like 4 years.

Eric@PYSpeed.com · 06-01-2009, 03:06 PM

Quote:

Originally Posted by Upgrade+

I need more details on how to work the install. I would like to order, but I want to know what I'm getting into. Any good DIY on the process? Also, how durable and lasting is the material? Will it start to curl off after a few years (like wall paper)? I would hate to go through the work, just to have it start peeling or curling off after like 4 years.

Here is a DIY from e90 member

http://www.e90post.com/forums/showth...04#post3824204

It's very good fabric material, so it's not like wall paper that will curl off.

Thanks
Eric

Upgrade+ · 06-01-2009, 04:23 PM

Oh boy. Looks like I will be ordering. Thanks Eric. How much (pieces) can we wrap with the fabric at the $40 price?

Eric@PYSpeed.com · 06-01-2009, 05:09 PM

Quote:

Originally Posted by Upgrade+

Oh boy. Looks like I will be ordering. Thanks Eric. How much (pieces) can we wrap with the fabric at the $40 price?

Normally we recommend two yards leaving some room for errors.... but if you are good, 1 yard is just about right. =)

Ordering is easy, u can do it either paypal us at sales@pyspeed.com or you can order online.

Thanks for your interest
Eric =)

Upgrade+ · 06-01-2009, 10:22 PM

Hey, one more Eric. How durable is the fabric against water or outdoor abuse (snow, rain, sun, etc)?

Eric@PYSpeed.com · 06-01-2009, 10:35 PM

Quote:

Originally Posted by Upgrade+

Hey, one more Eric. How durable is the fabric against water or outdoor abuse (snow, rain, sun, etc)?

Here are the characteristics of this fabric if you missed it up top

CF Fabric prides itself of the following:
-Extended Longevity
-Dry Carbon Effect
-OE Quality Finish
-Water Resistant
-Stain Resistant
-Crack Resistant

but it's not recommended to be use on the exterior parts at all.

Eric ~

BSM 135i · 06-01-2009, 11:32 PM

Quote:

Originally Posted by arok

one note though, I'd probably wrap the different sides with opposing patterns instead of matching, since it's not goign to look right. does that make sense?

IMO this way looks better since when you look at all the pieces directly the weave all goes the same way, if you do it the way you are talking about every piece would match except the driver's door piece and that wouldnt look right. plus if you look on a M3 every piece has the weave going the same way as i did.

arrutled · 06-03-2009, 05:32 AM

Could you sell me a trim tool as well to get the parts off without breaking anything?

BSM 135i · 06-04-2009, 02:46 AM

Quote:

Originally Posted by arrutled

Could you sell me a trim tool as well to get the parts off without breaking anything?

EAS sells them

05-21-2009, 02:18 PM	#1
Eric@PYSpeed.com Brigadier General Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	PYSpeed.com \| Carbon Fiber Fabric (3 colors to choose) $40 Shipped Join the Car Mod Sensation: PYSpeed is proud to bring Carbon Fiber Fabric to 1Addicts members with 3 exciting colors (Black, Charcoal, Titanium/$5 more). This is for people who are interested in DIYing their interior trims to a Carbon Fiber look. It is the newest type of carbon fiber interior. No, it's not your typical CF overlay nor is it vinyl. This is actual fabric showcasing a CF based weave to allow the trim to breathe even better than leather. Click for the DIY Guide CF Fabric prides itself of the following: -Extended Longevity -Dry Carbon Effect -OE Quality Finish -Water Resistant -Stain Resistant -Crack Resistant CF Fabric is selling by yard (52" x 36") at $40 shipped. Three different color are in stock right now, BLACK, CHARCOAL and TITANIUM/$45 shipped). You can paypal us at Sales@PYSpeed.com or Order Directly Online. Thanks for your time. =) * Shipping Quote: Quotes for US Mainland. Please email for the cheapest possible way to get one of these items shipped to your door if you are in Hawaii, Alaska, Puerto Rico, Canada, and other International countries. * California Residents: 9% CA Sales Tax is applicable. Last edited by Eric@PYSpeed.com; 09-24-2009 at 06:05 PM.
	Tweet

05-29-2009, 06:38 AM	#6
arrutled Colonel Drives: Olsa Join Date: Jun 2008 Location: Western Mass Posts: 2,471 iTrader: (0)	got any installed pictures of titanium? __________________ AW 135i w/ blackette, performance short shift kit, BMW alarm, Performance rotors, APEX ARC-8 wheels, Direzza Star Spec 235/275, Dinan stage 3 suspension, M3 wishbones/tension rods/front sway/rear subframe bushings and thats all folks!

05-29-2009, 04:30 PM	#8
Menace Hello my name is Wency Drives: E82-E46-S13 Join Date: Jan 2008 Location: Los Angeles Posts: 71 iTrader: (1)	How is this applied? Is there a pressure sensitive adhesive backing? Or do i apply the adhesive myself? __________________

06-03-2009, 05:32 AM	#21
arrutled Colonel Drives: Olsa Join Date: Jun 2008 Location: Western Mass Posts: 2,471 iTrader: (0)	Could you sell me a trim tool as well to get the parts off without breaking anything? __________________ AW 135i w/ blackette, performance short shift kit, BMW alarm, Performance rotors, APEX ARC-8 wheels, Direzza Star Spec 235/275, Dinan stage 3 suspension, M3 wishbones/tension rods/front sway/rear subframe bushings and thats all folks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-22-2009, 10:19 AM	#2
Eric@PYSpeed.com Brigadier General Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	Thanks Stan for the quick DIY picture. This took him just "5 mins". For $40, why not give it a shot, make your car stand out from the crowd with this good bang for the buck mod.

05-24-2009, 07:50 PM	#3
Eric@PYSpeed.com Brigadier General Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	All orders shipped out, remember to post pictures here after your DIY projects. Thanks Guys!

05-26-2009, 03:29 AM	#4
Eric@PYSpeed.com Brigadier General Drives: E90 \| F10 \| A4 Join Date: May 2009 Location: San Jose, CA 866.207.3722 Posts: 4,551 iTrader: (36)	Just finish processing orders going to Australia and HK, thanks for the orders guys. =)

05-29-2009, 04:32 AM	#5
BSM 135i Colonel Drives: 08' BSM E82 Join Date: Dec 2008 Location: Cali Posts: 2,232 iTrader: (23)	i got my fabric from Euro-Dyne but i highly recommend this fabric! it takes time and a little work but the outcome is worth every bit and is way better than spending $300 to get it wrapped somewhere else. i'm working on wrapping my trim right now and here's what i got done so far. it is black cf fabric btw... +85743895734857 on this fabric

06-01-2009, 02:51 PM	#14
Upgrade+ Good life Drives: BMW 335i Titanium Silver sport Join Date: Oct 2007 Location: NY Posts: 1,475 iTrader: (8)	I need more details on how to work the install. I would like to order, but I want to know what I'm getting into. Any good DIY on the process? Also, how durable and lasting is the material? Will it start to curl off after a few years (like wall paper)? I would hate to go through the work, just to have it start peeling or curling off after like 4 years.

06-01-2009, 04:23 PM	#16
Upgrade+ Good life Drives: BMW 335i Titanium Silver sport Join Date: Oct 2007 Location: NY Posts: 1,475 iTrader: (8)	Oh boy. Looks like I will be ordering. Thanks Eric. How much (pieces) can we wrap with the fabric at the $40 price?

06-01-2009, 10:22 PM	#18
Upgrade+ Good life Drives: BMW 335i Titanium Silver sport Join Date: Oct 2007 Location: NY Posts: 1,475 iTrader: (8)	Hey, one more Eric. How durable is the fabric against water or outdoor abuse (snow, rain, sun, etc)?