|
|
|
04-28-2010, 07:19 PM | #25 |
Private First Class
16
Rep 135
Posts |
howdy, So I've got a set of these that I've been waiting to install. I'm looking for some guidance however on how to do this. I've picked up the following tape:
http://www.scotchbrand.com/wps/porta...glBBR07XLQTGbl should I apply the tape to the back of the painted surface? should I apply the tape to the back of the CF overlay? What if I line everthing up and am off a bit, I won't be able to align it. For those that have done this, I appreciate the tips. |
Appreciate
0
|
04-28-2010, 08:23 PM | #26 |
BMW Technician
35
Rep 829
Posts |
To be honest, that tape is way too thick.
My mirrors came with really think double sided tape, I believe it was from 3M. Not sure on the specs but it was a lot thinner than what you have there. As far as install. I made sure to put enough tape along all of the edges of the mirror. I also put a significant amount on the center of the mirror for a nice secure fitment. Before you peel the adhesive off and stick the cover on there. Try a test fit just to be sure. Good luck! Hope you enjoy the CF covers as much as I do! |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|