|
|
|
10-23-2010, 03:22 PM | #1 |
Major
118
Rep 1,002
Posts |
REQ: Fit 135i Exhaust on 120i
I have a 120i Convertible.
I have a stock 135i back box (pictured below) and I want to get this fitted to my car, mainly I just want it for the look. My car is still under motorplan - i'm scared about them voiding motor plan. Even though it is an original BMW part, it's not designed to fit the 120i. Obviously the exhausts are different diameters 120i being 4cyl (50mm or so) and the 135i being 6cyl (63mm or so). So I dunno if BMW would be able to clamp it together, think an exhaust place would have to cut/weld or mod it some other way.. Also i think the hangers are in slightly different positions.. But apparently the hangers position can be changed easily. I think if the exhaust can be modded to fit the car, and not the current car/exhaust be modded to fit the exhaust then it should be fine. Then I can just replace the stock exhaust if necessary. My exhaust system (rear): 135i Exhaust System (rear): Pic of 135i zorst: Gonna go to some exhaust places when I have some time and ask their opinion. Thanks guys would appreciate any advice! |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|