>>> HP AUTOWERKS <<< Vorshlag Camber Plates Here! - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

HP Autowerks · 02-16-2011, 08:50 PM

In order to properly use Vorshlag camber plates, you must choose the option below to include Vorshlag upper spring perches that match your strut brand and spring type. Vorshlag camber/caster plates are designed to be compatible with 2.5”, 2.25" and 60mm “coilover” style springs, OEM (stock) style springs and all strut types. We make numerous variations of this plate and accompanying perches to work with your set-up. The Vorshlag upper perches allow us to add a sealed radial bearing that isolates the spherical bearing in the camber plate from radial turning loads of of the strut shaft during steering inputs. This is part of why our plates last the lifetime of the car!

*Compatible with 2.5", 2.25" and 60 mm coilover springs, factory springs, OEM Style Lowering springs and all struts.
*No need to change camber plates when switching from regular springs to coilovers - some companies sell you two totally different camber plates for coilover springs and factory style springs.
*Installs with basic hand tools, no chassis modifications required.
*Plates are designed specifically for BMW E82 & E87 (1 series) and E90 or E92 (3 series) chassis (except E90/E92 M3).
*Caster & Camber are independently adjustable.
*Camber is easily adjustable at the track from the engine compartment with simple (metric) hand tools. No need to reach inside the wheel well with a wrench to tighten.
*The spherical bearing used in the Vorshlag camber plate is the largest used in any BMW camber plate on the market. The result is much better durability and wear characteristics than the undersized bearings used in our competitors' plates.
*Designed for maximum suspension travel (bump travel). More than an inch more strut travel than some of our competitors' designs.
*Alloy steel bearing holder - Tough as a German Tank!
*Aluminum alloy main plate for lighter weight, engraved and fully anodized
*All components plated or anodized for maximum corrosion resistance and long life.
*Vorshlag Upper spring perches required. Coilover perches included in the basic price, but OEM style perches are extra (see "Spring Perch" drop down option menu, below).
*Maximum negative camber setting depends on caster setting, ride height, and is ultimately limited by the strut tower opening on these chassis. The E82/90/92 strut tower hole is more restrictive than previous generation BMWs. *Expect to get -2° to -3.5° max camber, depending on ride height.
*New and improved .25" thick top ring (introduced Dec 2008) for increased clearance between Vorshlag long reach M12x1.5 strut top nut to factory (faux) strut brace. Improved low profile bolt ring for more clearance when used with OEM style perches.

Available now!

Camber plates: $439
For use with OEM style springs: +$35

To order go to: http://hpashop.com/product.sc?produc...categoryId=175

OneThreeFive · 02-23-2011, 11:47 PM

Quote:

Originally Posted by HP Autowerks

In stock and ready to ship!

Free shipping?

OneThreeFive · 02-24-2011, 12:12 PM

Order placed. Thank you Harold!

adrean8j · 02-24-2011, 01:36 PM

Hey guys on your page I didn't see KW V1's listed....what size upper spring perches would one order then?

OneThreeFive · 02-24-2011, 01:45 PM

Quote:

Originally Posted by adrean8j

Hey guys on your page I didn't see KW V1's listed....what size upper spring perches would one order then?

I have the KW v1s. You want the OEM style springs / upper perch.

I already have my tracking number! This has to be some sort of record!

adrean8j · 02-24-2011, 01:58 PM

^^^Good stuff man...I already have HPAutowerks bookmarked so I can pull the trigger in a couple months....

OneThreeFive · 03-13-2011, 09:36 PM

Bump for a quality product. Got these installed last week and the techs specifically mentioned their quality and the ease of install as compared to other brands they work with.

HP Autowerks · 03-19-2011, 10:51 AM

Quote:

Originally Posted by OneThreeFive

Bump for a quality product. Got these installed last week and the techs specifically mentioned their quality and the ease of install as compared to other brands they work with.

All Vorshlag for E82/E9x are in stock. Including OEM, Koni, KW and Bilstein style struts, even the hard to find Ohlin coilovers.

lavmugen · 04-25-2011, 03:23 PM

for stock OEM m-sport suspension with E93 Front Sway, what do i choose?

Vorshlag - Camber Plates * OEM Style Springs E82/E9X Non-M Upper Perch (+$35.00)
Vorshlag - Camber Plates Strut Type * OEM E82 E90 (+$25.00)
Vorshlag - Camber Plates Bearing Type * Heavy Duty Double Row Bearing

these correct for otherwise stock suspension? thanks!

HP Autowerks · 04-27-2011, 02:37 AM

Quote:

Originally Posted by lavmugen

for stock OEM m-sport suspension with E93 Front Sway, what do i choose?

Vorshlag - Camber Plates * OEM Style Springs E82/E9X Non-M Upper Perch (+$35.00)
Vorshlag - Camber Plates Strut Type * OEM E82 E90 (+$25.00)
Vorshlag - Camber Plates Bearing Type * Heavy Duty Double Row Bearing

these correct for otherwise stock suspension? thanks!

Yes, that is correct.

dcho · 05-16-2011, 08:37 AM

i will be placing a call soon..

lavmugen · 05-23-2011, 12:53 PM

order placed. thanks for your help!

HP Autowerks · 06-23-2011, 02:52 AM

We were recently sold out of these plates, but will have these back in stock by early next week.

HP Autowerks · 07-16-2011, 01:59 AM

Camber plates are back in stock for most OE, KW, Koni, AST and Ohlins applications.

M135 · 08-22-2011, 11:06 AM

For KW V2's which one do I want, the 60MM upper perch?

akak1997 · 09-09-2011, 03:25 AM

Got mine last week! Great Product and super faster shipping!
a side note, it does increase road noise a bit, doesn't bother me, just noticeable.

HP Autowerks · 09-23-2011, 05:45 PM

Quote:

Originally Posted by akak1997

Got mine last week! Great Product and super faster shipping!
a side note, it does increase road noise a bit, doesn't bother me, just noticeable.

The performance should outweigh the slight road noise.

HP Autowerks · 03-01-2012, 07:34 PM

Stock struts and spring...No problem!

KW's...No problem!

Koni's...No problem!

AST's...No problem!

Ohlins...No problem!

Moton...No problem!

HP Autowerks · 03-10-2012, 01:05 AM

Get your Vorshlag camber plates at HP Auotwerks, Inc. Your largest West coast stocking dealer and installer for Vorshlag suspension parts.

We have been selling and installing these on E9x BMW's since 2006, no one on the West coast has a longer history with Vorshlag than we have.

HP Autowerks · 07-25-2012, 06:27 PM

We now stock JRZ 1M RS, JRZ 1M RS1, JRZ M3 RS, JRZ M3 RS1 and all none M 135i/335i RS and RS1 Vorshlag camber plates!

HP Autowerks · 05-14-2013, 12:38 PM

These are again on back order. Place your order now for shipping at the end of the month!

02-16-2011, 08:50 PM	#1
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,052 iTrader: (26)	>>> HP AUTOWERKS <<< Vorshlag Camber Plates Here! In order to properly use Vorshlag camber plates, you must choose the option below to include Vorshlag upper spring perches that match your strut brand and spring type. Vorshlag camber/caster plates are designed to be compatible with 2.5”, 2.25" and 60mm “coilover” style springs, OEM (stock) style springs and all strut types. We make numerous variations of this plate and accompanying perches to work with your set-up. The Vorshlag upper perches allow us to add a sealed radial bearing that isolates the spherical bearing in the camber plate from radial turning loads of of the strut shaft during steering inputs. This is part of why our plates last the lifetime of the car! Compatible with 2.5", 2.25" and 60 mm coilover springs, factory springs, OEM Style Lowering springs and all struts. No need to change camber plates when switching from regular springs to coilovers - some companies sell you two totally different camber plates for coilover springs and factory style springs. Installs with basic hand tools, no chassis modifications required. Plates are designed specifically for BMW E82 & E87 (1 series) and E90 or E92 (3 series) chassis (except E90/E92 M3). Caster & Camber are independently adjustable. Camber is easily adjustable at the track from the engine compartment with simple (metric) hand tools. No need to reach inside the wheel well with a wrench to tighten. The spherical bearing used in the Vorshlag camber plate is the largest used in any BMW camber plate on the market. The result is much better durability and wear characteristics than the undersized bearings used in our competitors' plates. Designed for maximum suspension travel (bump travel). More than an inch more strut travel than some of our competitors' designs. Alloy steel bearing holder - Tough as a German Tank! Aluminum alloy main plate for lighter weight, engraved and fully anodized All components plated or anodized for maximum corrosion resistance and long life. Vorshlag Upper spring perches required. Coilover perches included in the basic price, but OEM style perches are extra (see "Spring Perch" drop down option menu, below). Maximum negative camber setting depends on caster setting, ride height, and is ultimately limited by the strut tower opening on these chassis. The E82/90/92 strut tower hole is more restrictive than previous generation BMWs. Expect to get -2° to -3.5° max camber, depending on ride height. *New and improved .25" thick top ring (introduced Dec 2008) for increased clearance between Vorshlag long reach M12x1.5 strut top nut to factory (faux) strut brace. Improved low profile bolt ring for more clearance when used with OEM style perches. Available now! Camber plates: $439 For use with OEM style springs: +$35 To order go to: http://hpashop.com/product.sc?produc...categoryId=175
	Tweet

07-16-2011, 01:59 AM	#14
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,052 iTrader: (26)	Camber plates are back in stock for most OE, KW, Koni, AST and Ohlins applications. Camber plates are back in stock for most OE, KW, Koni, AST and Ohlins applications.

08-22-2011, 11:06 AM	#15
M135 Professional Rookie Drives: 2011 135i and 2004 4Runner Join Date: Sep 2007 Location: Earth Posts: 504 iTrader: (0) Garage List 2011 BMW 135i [3.63]	For KW V2's which one do I want, the 60MM upper perch? __________________ 2011 FBO & meth 135i 7/20/2012 Dyno FBO no meth: 369 whp \| 432 wtq Dynojet BMS \| ER \| KW \| DPE \| iCarbon \| OEM

03-10-2012, 01:05 AM	#19
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,052 iTrader: (26)	Camber and caster plates Get your Vorshlag camber plates at HP Auotwerks, Inc. Your largest West coast stocking dealer and installer for Vorshlag suspension parts. We have been selling and installing these on E9x BMW's since 2006, no one on the West coast has a longer history with Vorshlag than we have.

07-25-2012, 06:27 PM	#20
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,052 iTrader: (26)	We now stock JRZ 1M RS, JRZ 1M RS1, JRZ M3 RS, JRZ M3 RS1 and all none M 135i/335i RS and RS1 Vorshlag camber plates! Attached Images

02-24-2011, 12:12 PM	#3
OneThreeFive Lieutenant Drives: 2009 AW 135i Join Date: May 2009 Location: NoVA Posts: 566 iTrader: (10) Garage List 2009 BMW 135i \| SOLD [5.00] 1999 BMW M3 \| CURRENT [0.00]	Order placed. Thank you Harold!

03-13-2011, 09:36 PM	#7
OneThreeFive Lieutenant Drives: 2009 AW 135i Join Date: May 2009 Location: NoVA Posts: 566 iTrader: (10) Garage List 2009 BMW 135i \| SOLD [5.00] 1999 BMW M3 \| CURRENT [0.00]	Bump for a quality product. Got these installed last week and the techs specifically mentioned their quality and the ease of install as compared to other brands they work with.

04-25-2011, 03:23 PM	#9
lavmugen Private First Class Drives: 2011 Superman 135i Join Date: Jan 2010 Location: Vancouver, BC Posts: 152 iTrader: (0)	for stock OEM m-sport suspension with E93 Front Sway, what do i choose? Vorshlag - Camber Plates * OEM Style Springs E82/E9X Non-M Upper Perch (+$35.00) Vorshlag - Camber Plates Strut Type * OEM E82 E90 (+$25.00) Vorshlag - Camber Plates Bearing Type * Heavy Duty Double Row Bearing these correct for otherwise stock suspension? thanks!

05-16-2011, 08:37 AM	#11
dcho Captain Drives: SGM 135i Join Date: Jul 2009 Location: Houston Posts: 897 iTrader: (0)	i will be placing a call soon..

05-23-2011, 12:53 PM	#12
lavmugen Private First Class Drives: 2011 Superman 135i Join Date: Jan 2010 Location: Vancouver, BC Posts: 152 iTrader: (0)	order placed. thanks for your help!

06-23-2011, 02:52 AM	#13
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,052 iTrader: (26)	We were recently sold out of these plates, but will have these back in stock by early next week.

09-09-2011, 03:25 AM	#16
akak1997 Major Drives: BMW 135 @ 135mph Join Date: Aug 2008 Location: Los Angeles Posts: 1,161 iTrader: (2) Garage List 2008 135i [0.00]	Got mine last week! Great Product and super faster shipping! a side note, it does increase road noise a bit, doesn't bother me, just noticeable.

03-01-2012, 07:34 PM	#18
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,052 iTrader: (26)	Stock struts and spring...No problem! KW's...No problem! Koni's...No problem! AST's...No problem! Ohlins...No problem! Moton...No problem!

05-14-2013, 12:38 PM	#21
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,052 iTrader: (26)	These are again on back order. Place your order now for shipping at the end of the month!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search