Cheap Solution to Amber Delete - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

Aries932 · 04-23-2011, 12:04 AM

So I brought my car in to get tinted today, and asked him if he was able to tint the front corner lights. Ended up looking really nice actually. I still need the stealth bulbs so you can see a bit of amber, but overall not so bad.

1speedbike · 04-23-2011, 12:16 AM

Looks great! Cleaner than amber-gone stickers. The tints and the car in general look great too

1LazyBmw · 04-23-2011, 01:07 AM

Thats what I did to my car.. cheaper and better...

Sylon · 04-23-2011, 01:19 AM

Looks good from afar, got any close up shots?

Aries932 · 04-23-2011, 03:19 AM

Quote:

Originally Posted by Sylon

Looks good from afar, got any close up shots?

Not yet...I figured I would let the tint settle before I did any close ups. Usually takes about 24 hours for everything to dry and settle.

SDW335 · 04-23-2011, 09:27 AM

Do you think it will hold up being that it's exposed?

N55_BBM · 04-23-2011, 10:36 AM

Quote:

Originally Posted by SDW335

Do you think it will hold up being that it's exposed?

+1

windows tints after like 2-3 years run the risk of starting to peel on the edges by my experience (had that happen only once actually lol). but being that these are on the outside and exposed to extreme wind when you're going 60+ mph and rock, debris, etc I'd figure it would peel out easily..

Aries932 · 04-23-2011, 10:52 AM

Quote:

Originally Posted by N55_BBM

+1

windows tints after like 2-3 years run the risk of starting to peel on the edges by my experience (had that happen only once actually lol). but being that these are on the outside and exposed to extreme wind when you're going 60+ mph and rock, debris, etc I'd figure it would peel out easily..

Well I will keep you guys updated, but it is the same tint they use for people who tint their entire headlight and they said they never have any issues...plus the tint comes with a lifetime warrenty for peeling...so if that happens I can just bring it in and keep getting it replaced.

rps1m · 04-23-2011, 11:06 AM

I know it would be pricier, but does anyone know if you can get an entire headlamp assembly like the one that comes from the factory on European cars and retrofit it to the car?

1SerieStud · 04-23-2011, 03:32 PM

Based on this statement, I'm positive that what was used on the headlights is not the same film used to tint the windows. It is probably a 3M material just like what's used for "clear bra" purposes...I know companies make other colors besides clear. I had my headlights clearcoated along with the entire front kit, and they are flawless 9 months later.

Quote:

Originally Posted by Aries932

Quote:

Originally Posted by N55_BBM

1

windows tints after like 2-3 years run the risk of starting to peel on the edges by my experience (had that happen only once actually lol). but being that these are on the outside and exposed to extreme wind when you're going 60 mph and rock, debris, etc I'd figure it would peel out easily..

Well I will keep you guys updated, but it is the same tint they use for people who tint their entire headlight and they said they never have any issues...plus the tint comes with a lifetime warrenty for peeling...so if that happens I can just bring it in and keep getting it replaced.

Aries932 · 04-23-2011, 08:49 PM

Here are some close ups as you can see I still need stealth bulbs...oh and FYI it is not the same tint as the windows...it is completely different.

In fact they literally only have 3 tint types...light, medium, and dark...there is no 20% or whatever tint percentage you want.

Lester · 04-24-2011, 03:17 AM

Quote:

Originally Posted by rps1m

I know it would be pricier, but does anyone know if you can get an entire headlamp assembly like the one that comes from the factory on European cars and retrofit it to the car?

Yes you can, but they are $1,200 each side. And they do not meed US DOT so they are not legal in the US.

RobMason · 04-24-2011, 02:07 PM

What is the type and name of the material that was used? Who makes it?

Aries932 · 04-24-2011, 11:37 PM

Quote:

Originally Posted by RobMason

What is the type and name of the material that was used? Who makes it?

No clue you can call distinctive automotive, and ask if you would like. Just ask him what tint he used on the 2011 White 135i that he just did on friday.

5334 Alhama Drive, CA
(818) 704-9252 ‎

superchargedman · 05-10-2011, 09:17 PM

did anyone call him to ask what tint he used?

BSM 135i · 05-11-2011, 02:24 AM

tint is not the ideal material for this since it's not designed for the exterior of the car. after replacing one of my headlights i had to get a new set of amber-gones from **********s since they only come in pairs but did not want to pay $70 for another pair so i went with InStyle graphics after being recommended by a lot of friends and was very pleased to know that he uses the same material as the **********s amber-gones for a more reasonable price and even offers it in different shades...

1Bimmer54 · 05-11-2011, 03:53 AM

looks really nice, best buck for plp who dislike amber

about350 · 05-11-2011, 05:03 PM

Quote:

Originally Posted by riders54

looks really nice, best buck for plp who dislike amber

Agreed
Cant wait till I get my done.

DARK PHX · 12-02-2011, 02:47 PM

Looks great. Those are some dark tints I must say.

strati1 · 12-02-2011, 02:53 PM

Did this on my Jet Black 1 and took it off after a week because it ruined the lines of the headlight. The dark tint blends with the dark paint so it creates a headlight profile that looks similar to the X5. just my .02

looks good on AW though

Dano135i · 12-02-2011, 06:00 PM

Looks pretty awesome. Might look even better with black kidneys and maybe a b&w rondel? what % is that window tint? looks super dark.

P1et · 12-02-2011, 07:12 PM

I'll be honest: for me it's either go for the European lights, or just deal with the ambers. I haven't seen "anything in between" that I'm fond of.

04-23-2011, 12:04 AM	#1
Aries932 Lieutenant Drives: AW 2011 135i DCT Join Date: Feb 2007 Location: Woodland Hills, CA Posts: 596 iTrader: (2)	Cheap Solution to Amber Delete So I brought my car in to get tinted today, and asked him if he was able to tint the front corner lights. Ended up looking really nice actually. I still need the stealth bulbs so you can see a bit of amber, but overall not so bad. __________________ 2011 AW 135i - DCT - M Package - BMW Performance Suspension Kit - Berk Street Midpipes - Evolution Racewerks FMIC - JB4 - BMS Intake - BMS Downpipes
	Tweet

04-23-2011, 12:16 AM	#2
1speedbike Colonel Drives: 2008 BMW 135i Join Date: Jun 2008 Location: NJ, NYC, Baltimore Posts: 2,915 iTrader: (14)	Looks great! Cleaner than amber-gone stickers. The tints and the car in general look great too __________________ Year 1 of the 1

04-23-2011, 01:07 AM	#3
1LazyBmw Brigadier General Drives: E82 Join Date: Jun 2008 Location: Toronto Posts: 3,992 iTrader: (5)	Thats what I did to my car.. cheaper and better... __________________ Cardomain: http://www.cardomain.com/ride/3334104

04-23-2011, 01:19 AM	#4
Sylon Brigadier General Drives: 2011 135i, SG/CR, 6MT, M-Sport Join Date: Apr 2010 Location: Michigan / Ohio Posts: 3,151 iTrader: (0) Garage List 2011 135i [4.60]	Looks good from afar, got any close up shots? __________________ 2011 BMW 135i \| Space Gray \| ///M-Sport \| BMW CCA #450291 Facebook / Instagram / YouTube / Twitter

04-23-2011, 08:49 PM	#11
Aries932 Lieutenant Drives: AW 2011 135i DCT Join Date: Feb 2007 Location: Woodland Hills, CA Posts: 596 iTrader: (2)	Here are some close ups as you can see I still need stealth bulbs...oh and FYI it is not the same tint as the windows...it is completely different. In fact they literally only have 3 tint types...light, medium, and dark...there is no 20% or whatever tint percentage you want. __________________ 2011 AW 135i - DCT - M Package - BMW Performance Suspension Kit - Berk Street Midpipes - Evolution Racewerks FMIC - JB4 - BMS Intake - BMS Downpipes

04-23-2011, 09:27 AM	#6
SDW335 Second Lieutenant Drives: BMW Drei-Reihen Join Date: Dec 2007 Location: Sarasota, Florida Posts: 258 iTrader: (2)	Do you think it will hold up being that it's exposed?

04-23-2011, 11:06 AM	#9
rps1m Private First Class Drives: something Join Date: Dec 2010 Location: somewhere Posts: 131 iTrader: (0)	I know it would be pricier, but does anyone know if you can get an entire headlamp assembly like the one that comes from the factory on European cars and retrofit it to the car?

04-24-2011, 02:07 PM	#13
RobMason M Power Drives: '09 ///M-Sport 135i Join Date: Nov 2007 Location: San Rafael Posts: 1,471 iTrader: (3)	What is the type and name of the material that was used? Who makes it? __________________

05-10-2011, 09:17 PM	#15
superchargedman Captain Drives: The ///Mbulance: 1M AW Join Date: Apr 2010 Location: Canada Posts: 871 iTrader: (1)	did anyone call him to ask what tint he used?

05-11-2011, 02:24 AM	#16
BSM 135i Colonel Drives: 08' BSM E82 Join Date: Dec 2008 Location: Cali Posts: 2,232 iTrader: (23)	tint is not the ideal material for this since it's not designed for the exterior of the car. after replacing one of my headlights i had to get a new set of amber-gones from ********s since they only come in pairs but did not want to pay $70 for another pair so i went with InStyle graphics after being recommended by a lot of friends and was very pleased to know that he uses the same material as the ********s amber-gones for a more reasonable price and even offers it in different shades...

05-11-2011, 03:53 AM	#17
1Bimmer54 1 Lover Drives: 2009 BMW 135I Join Date: Nov 2010 Location: California Posts: 104 iTrader: (0)	looks really nice, best buck for plp who dislike amber

12-02-2011, 02:47 PM	#19
DARK PHX Private Drives: 2009 e82 135i Join Date: Nov 2011 Location: Arlington, VA Posts: 98 iTrader: (0) Garage List 2009 135i [0.00]	Looks great. Those are some dark tints I must say.

12-02-2011, 02:53 PM	#20
strati1 Lieutenant Drives: a slow car fast Join Date: May 2010 Location: DFW/SoCal Posts: 405 iTrader: (0)	Did this on my Jet Black 1 and took it off after a week because it ruined the lines of the headlight. The dark tint blends with the dark paint so it creates a headlight profile that looks similar to the X5. just my .02 looks good on AW though __________________ //Mods: Golf Tee, red out tails, smoked fogs, B&G S2 Springs, Adjustable Koni Yellows, Vorshlag Camberplates, 19x8.5 19x9.5 VMR v718, 225/245 PSS, Rolled fenders http://www.1addicts.com/forums/showthread.php?t=498857

12-02-2011, 06:00 PM	#21
Dano135i Private Drives: 2012 135i Coupe Join Date: Sep 2011 Location: Winder, GA Posts: 94 iTrader: (0)	Looks pretty awesome. Might look even better with black kidneys and maybe a b&w rondel? what % is that window tint? looks super dark. Last edited by Dano135i; 12-02-2011 at 09:01 PM.

12-02-2011, 07:12 PM	#22
P1et Major Drives: '04 Ram 2500 / '11 135i Join Date: Aug 2007 Location: Texas Posts: 1,212 iTrader: (1)	I'll be honest: for me it's either go for the European lights, or just deal with the ambers. I haven't seen "anything in between" that I'm fond of.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search