1M ESS Tuning - teaser

urban_alchemist · 07-02-2011, 04:11 AM

Quote:

Originally Posted by M3Power79

Does this tune also works for the EU spec cars?

And if so, where do we sign up?

Roman@ESS · 07-02-2011, 10:07 AM

Quote:

Originally Posted by M3Power79

Does this tune also works for the EU spec cars?

All of our software is developed for both US and Euro spec vehicles. 1M Direct Flash should be available on our website to order this weekend.

b33g33 · 07-02-2011, 10:26 AM

Coming from the Audi APR tuning world, I'm used to being able to switch between ECU programs by simply holding down my cruise control for a specific number of seconds (the flashing frequency of the check engine light lets you know which program you're in).

Do all BMW tunes require a full reflash every time? On my A4, I could discreetly put the car into stock mode while waiting for the service manager to pull up my loaner (in case I forgot to at home)

Not trying to rile anyone up. I'm genuinely curious.

biglare · 07-06-2011, 01:28 AM

After a few days of driving the 1M around with the ESS tune the car just completely rips! The low end torque is always there when you want it and you don't always have to downshift to be pegged into your seat! I had a couple of friends drive it and they were in complete awe! They think it will take down N/A M3's all day long now!

I am very pleased with the linear power delivery now. The car now pulls all the way to redline without what felt like a plateau from the stock setup as it approached redline. The "M" button functions as normal with improved throttle response, but be careful as it is completely addictive now with the added power!

Dyno's will come later this week, so I'll post some updates then!

M3Power79 · 07-06-2011, 01:33 AM

Your buttdyno is already convinced it seems!

T1T2GRE · 07-06-2011, 04:16 PM

Quote:

Originally Posted by Roman@ESS

We have a facility in Norway also. 1M software development was done on a vehicle in Europe and final testing was done on a US spec car here before release.

Our new 1M software is rated at 400 HP. The vehicle retains 100% of its OEM functions with our tune and can be flashed back to stock via Direct Flash at anytime.

Can BMWNA "see" the flashes when they are hooked up to the port? I mean, can they see a flash history or does it just look like stock when flashed back to stock settings?

MrRoboto · 07-06-2011, 05:01 PM

Quote:

Originally Posted by T1T2GRE

Can BMWNA "see" the flashes when they are hooked up to the port? I mean, can they see a flash history or does it just look like stock when flashed back to stock settings?

Just get a BT cable and clear all the codes.

AJ@ESS · 07-06-2011, 06:09 PM

Quote:

Originally Posted by MrRoboto

Just get a BT cable and clear all the codes.

If you do this after re-installing the stock file you will not have issues with dealer visits. It is very rare that a hidden code is thrown with our software but to be 100% sure its always best to do a clear.

MrRoboto · 07-06-2011, 07:47 PM

Quote:

Originally Posted by AJ@ESS

If you do this after re-installing the stock file you will not have issues with dealer visits. It is very rare that a hidden code is thrown with our software but to be 100% sure its always best to do a clear.

What do you mean...issues with dealer visits?

Roman@ESS · 07-06-2011, 08:05 PM

Quote:

Originally Posted by MrRoboto

What do you mean...issues with dealer visits?

Going to the dealer with aftermarket software installed or hidden codes related to tuning. Most prefere to have the vehicle running stock software and code free when they take the car in for service visits.

biglare · 07-06-2011, 08:18 PM

I have been running the new file for the past 6 days and no issues! I know that some of you may be interested if there are any codes, I checked the codes with a code reading tool..... and zero codes!

MrRoboto · 07-06-2011, 08:45 PM

Quote:

Originally Posted by Roman@ESS

Going to the dealer with aftermarket software installed or hidden codes related to tuning. Most prefere to have the vehicle running stock software and code free when they take the car in for service visits.

I agree...that is what I meant by remove all codes before dealer visits.

MrRoboto · 07-06-2011, 08:46 PM

Quote:

Originally Posted by biglare

I have been running the new file for the past 6 days and no issues! I know that some of you may be interested if there are any codes, I checked the codes with a code reading tool..... and zero codes!

That thing wont show you 'tuner' codes. Need the BT cable.

E821M · 07-06-2011, 11:27 PM

Pardon my ignorance, but what is a BT cable, where can I find one, and how does it work?

biglare · 07-07-2011, 12:05 AM

Quote:

Originally Posted by MrRoboto

That thing wont show you 'tuner' codes. Need the BT cable.

Agreed, but there are other "tunes" (no names) that have shown several codes with even this type of reader.

wuNasty · 07-07-2011, 12:42 AM

Quote:

Originally Posted by rps1m

Pardon my ignorance, but what is a BT cable, where can I find one, and how does it work?

bavarian technic cable

http://n54tuning.com/index.php?_a=vi...2c2442789b48b0

biglare · 07-11-2011, 11:41 AM

Dyno's have been run for ESS Stage 1 tune as well as stock.

Please see the new thread here --> http://www.1addicts.com/forums/showthread.php?t=557030

07-02-2011, 10:26 AM	#25
b33g33 Give '///M' Hell! Drives: Einser Rex Join Date: Jun 2011 Location: Atlanta, GA Posts: 1,305 iTrader: (0)	Coming from the Audi APR tuning world, I'm used to being able to switch between ECU programs by simply holding down my cruise control for a specific number of seconds (the flashing frequency of the check engine light lets you know which program you're in). Do all BMW tunes require a full reflash every time? On my A4, I could discreetly put the car into stock mode while waiting for the service manager to pull up my loaner (in case I forgot to at home) Not trying to rile anyone up. I'm genuinely curious. __________________ The 1 series M is the most badass, coolest, sickest BMW to debut since the 1988 M3. The E30 M3 finally has a successor. Please welcome the stupidly fast, wickedly tempered, awkwardly named, possibly perfect little son of a benchmark - Automobile Magazine, August 2011
	0

07-06-2011, 01:28 AM	#26
biglare Brigadier General Drives: ? Join Date: May 2008 Location: ? Posts: 3,066 iTrader: (3)	After a few days of driving the 1M around with the ESS tune the car just completely rips! The low end torque is always there when you want it and you don't always have to downshift to be pegged into your seat! I had a couple of friends drive it and they were in complete awe! They think it will take down N/A M3's all day long now! I am very pleased with the linear power delivery now. The car now pulls all the way to redline without what felt like a plateau from the stock setup as it approached redline. The "M" button functions as normal with improved throttle response, but be careful as it is completely addictive now with the added power! Dyno's will come later this week, so I'll post some updates then! __________________
	0

07-06-2011, 01:33 AM	#27
M3Power79 Lieutenant Drives: 1M sold - M4 MW DKG ordered Join Date: Oct 2010 Location: Belgium Posts: 490 iTrader: (0)	Your buttdyno is already convinced it seems! __________________ "... on the smiles-per-mile charts, the 1-series M coupe can't be beat. It is a challenging piece, a triple-X-rated driver's machine for semi-professionals. Its handling balance provides an open invitation to indulge in latent oversteer, and provides an opportunity to separate the men from the boys. It is an absolute hoot on the track and an addictive plaything on your favorite twisty back road. "
	0

07-06-2011, 08:18 PM	#33
biglare Brigadier General Drives: ? Join Date: May 2008 Location: ? Posts: 3,066 iTrader: (3)	I have been running the new file for the past 6 days and no issues! I know that some of you may be interested if there are any codes, I checked the codes with a code reading tool..... and zero codes! __________________
	0

07-11-2011, 11:41 AM	#39
biglare Brigadier General Drives: ? Join Date: May 2008 Location: ? Posts: 3,066 iTrader: (3)	Dyno's have been run for ESS Stage 1 tune as well as stock. Please see the new thread here --> http://www.1addicts.com/forums/showthread.php?t=557030 __________________
	0

07-06-2011, 11:27 PM	#36
E821M Private First Class Drives: 1M/330CI ZHP Join Date: Dec 2010 Location: GA Posts: 150 iTrader: (0)	Pardon my ignorance, but what is a BT cable, where can I find one, and how does it work?
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search