>> HP Autowerks << Stoptech Big Brake Kit

HP Autosport · 04-18-2011, 05:06 PM

Big Brake Kits give your vehicle that Supercar look and feel, and exceed stock performance in two areas. First, larger rotors increase heat capacity. Second, stiffer calipers and stainless steel lines reduce system compliance.

The key, however, is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front torque (as many do), you reduce your car's ability to utilize the tractive capacity of all of the tires to the maximum practical extent (even on ABS equipped cars) and you therefore create performance sacrifices. In addition, too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, which limits a driver's control of brake input on the race track.

Advantages of StopTech over other brake upgrades:
-Shorter Stopping Distances
-Better Brake Modulation
-Firmer Brake Pedal
-Less Brake Fade

Feature Benefit Summary:
-Balanced Brake Upgrades™ with optimum brake bias offer the shortest stopping distance with the best pedal feel
-Our patented AeroRotors® with the best airflow available result in better cooling, less fade and longer rotor and pad life
-The stiffest aftermarket calipers with patented bridge result in better clamping under hard braking and less pad taper
-Track testing of new applications ensures optimum performance

The key here isn't about the weight savings but the increase in the
amount of heat capacity available.

Application and Pricing

Front 14 inch Sport BBK
ST-60 6 Piston Calipers
Floating 355x32mm Rotors
Stainless Steel Braided Brake Lines
MSRP - $3495.00

Rear 13.6 inch Sport BBK
ST-40 4 Piston Calipers
Floating 345x28mm Rotors
Stainless Steel Braided Brake Lines
MSRP - $2895.00

Additional Price Info
Red / Black / Silver Calipers - No Additional Cost
Blue / Yellow / Gold - $200.00 per axle
Slotted Rotors – No Additional Cost
Drilled Rotors - $100.00 per axle
-For gold, blue, silver or yellow calipers, please add 4 weeks for lead time.

Please shoot us a PM for your 1Addicts Member price!

We are located in Santa Barbara, CA but we ship worldwide and have many satisfied customers around the globe. Please shoot us an email or give us a call and we are more than happy to help you.

thez99 · 04-19-2011, 04:28 PM

Dyou guys sell stoptech pads by themselves? If so, will they fit the oem calipers just fine, etc. Lemme know cuz im not too happy with my CC pads.

HP Autosport · 04-21-2011, 07:27 PM

Quote:

Originally Posted by thez99

Dyou guys sell stoptech pads by themselves? If so, will they fit the oem calipers just fine, etc. Lemme know cuz im not too happy with my CC pads.

Replied to you via PM.

Rikx1M · 06-21-2012, 07:34 AM

I have a 1M and use the OEM wheels for DD but for track I use the 18x10 Apex ARC-8 rims...will this kit fit inside the Apex rims?

If so, please pm front and rear calipers with drilled rotors or can I use the OEM rotors?

HP Autosport · 06-21-2012, 11:15 AM

Quote:

Originally Posted by Rikx1M

I have a 1M and use the OEM wheels for DD but for track I use the 18x10 Apex ARC-8 rims...will this kit fit inside the Apex rims?

If so, please pm front and rear calipers with drilled rotors or can I use the OEM rotors?

This thread is for 135i only, but I'll PM you prices for 1M application and price. 380mm rotor with 6 piston will fit within oem 19" wheels and 18" Apex wheels as we run our 1M that way. This kit comes with Stoptech Aero rotors, which are both lighter and a much larger heat sink.

1M takes M3 brake applications:

http://www.m3post.com/forums/showthread.php?t=513125

tranism · 06-23-2012, 04:40 AM

What about 128i?

Dmacc · 06-23-2012, 01:24 PM

Love my ST60 kit

bump for an amazing price on an amazing product

HP Autosport · 06-25-2012, 12:30 AM

Quote:

Originally Posted by tranism

What about 128i?

Same specs and prices as above. Only the piston sizes are different.

HP Autosport · 10-12-2012, 05:31 PM

You don't have to spend a fortune on a BBK. Shoot us a PM for best prices!

With Stoptech you can buy pads in just about any compound and just about anywhere.

HP Autosport · 02-25-2013, 02:23 PM

Quote:

Originally Posted by tranism

What about 128i?

128i BBK available as well!

HP Autosport · 07-03-2013, 12:34 PM

Retail price increase of $300 per axle affective 7/1.

Your discount % does not change with us so PM us for best prices!

HP Autosport · 11-06-2013, 07:18 PM

Bump!

04-18-2011, 05:06 PM	#1
HP Autosport Lieutenant General Drives: E82 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,809 iTrader: (29)	>> HP Autowerks << Stoptech Big Brake Kit - EXCLUSIVE Pricing for 1Addict Members Big Brake Kits give your vehicle that Supercar look and feel, and exceed stock performance in two areas. First, larger rotors increase heat capacity. Second, stiffer calipers and stainless steel lines reduce system compliance. The key, however, is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front torque (as many do), you reduce your car's ability to utilize the tractive capacity of all of the tires to the maximum practical extent (even on ABS equipped cars) and you therefore create performance sacrifices. In addition, too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, which limits a driver's control of brake input on the race track. Advantages of StopTech over other brake upgrades: -Shorter Stopping Distances -Better Brake Modulation -Firmer Brake Pedal -Less Brake Fade Feature Benefit Summary: -Balanced Brake Upgrades™ with optimum brake bias offer the shortest stopping distance with the best pedal feel -Our patented AeroRotors® with the best airflow available result in better cooling, less fade and longer rotor and pad life -The stiffest aftermarket calipers with patented bridge result in better clamping under hard braking and less pad taper -Track testing of new applications ensures optimum performance The key here isn't about the weight savings but the increase in the amount of heat capacity available. Application and Pricing Front 14 inch Sport BBK ST-60 6 Piston Calipers Floating 355x32mm Rotors Stainless Steel Braided Brake Lines MSRP - $3495.00 Rear 13.6 inch Sport BBK ST-40 4 Piston Calipers Floating 345x28mm Rotors Stainless Steel Braided Brake Lines MSRP - $2895.00 Additional Price Info Red / Black / Silver Calipers - No Additional Cost Blue / Yellow / Gold - $200.00 per axle Slotted Rotors – No Additional Cost Drilled Rotors - $100.00 per axle -For gold, blue, silver or yellow calipers, please add 4 weeks for lead time. Please shoot us a PM for your 1Addicts Member price! We are located in Santa Barbara, CA but we ship worldwide and have many satisfied customers around the globe. Please shoot us an email or give us a call and we are more than happy to help you. Last edited by HP Autosport; 07-03-2013 at 12:33 PM.
	0 Tweet

04-19-2011, 04:28 PM	#2
thez99 Colonel Drives: 2010 135i Auto Join Date: Nov 2009 Location: Wake Forest, NC Posts: 2,585 iTrader: (5) Garage List 2010 135i [3.00]	Dyou guys sell stoptech pads by themselves? If so, will they fit the oem calipers just fine, etc. Lemme know cuz im not too happy with my CC pads. __________________ = ER Chargepipe/HKS BOV = Maddad Whisper Axle-back exhaust = Maddad resonted 3" midpipes = BMS DCI = HPF FMIC - 18" vmr 701's with Michelin PSS tires - M3 front sway == Coming soon? = M3 front suspension bits - rear m3 subframe bushings - BMW Perf Suspension - IC rear diffusor and spoiler
	0

06-21-2012, 07:34 AM	#4
Rikx1M MSgt (ret) Drives: VO 1M #739/740 Join Date: May 2010 Location: Alabama Posts: 1,627 iTrader: (2) Garage List 2011 BMW 1 series M ... [5.00]	Fit 1M with Apex ARC-8? I have a 1M and use the OEM wheels for DD but for track I use the 18x10 Apex ARC-8 rims...will this kit fit inside the Apex rims? If so, please pm front and rear calipers with drilled rotors or can I use the OEM rotors? __________________
	0

06-23-2012, 01:24 PM	#7
Dmacc Colonel Drives: 2010 135i Join Date: Mar 2010 Location: Nor Cal Posts: 2,412 iTrader: (1)	Love my ST60 kit bump for an amazing price on an amazing product __________________ thanks to MGallop
	0

10-12-2012, 05:31 PM	#9
HP Autosport Lieutenant General Drives: E82 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,809 iTrader: (29)	Stoptech BBK You don't have to spend a fortune on a BBK. Shoot us a PM for best prices! With Stoptech you can buy pads in just about any compound and just about anywhere.
	0

06-23-2012, 04:40 AM	#6
tranism Care Bears vs Klingons Drives: 128i Coupe Join Date: Jan 2012 Location: Los Angeles Posts: 206 iTrader: (0)	What about 128i?
	0

07-03-2013, 12:34 PM	#11
HP Autosport Lieutenant General Drives: E82 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,809 iTrader: (29)	Retail price increase of $300 per axle affective 7/1. Your discount % does not change with us so PM us for best prices!
	0

11-06-2013, 07:18 PM	#12
HP Autosport Lieutenant General Drives: E82 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,809 iTrader: (29)	Bump!
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search