BavarianX|EuroTek LeMans Wheel 1-Series Specific Fitment NOW AVAILABLE!!! - Page 4 - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

Brian@bavarianx · 09-23-2011, 11:38 AM

Quote:

Originally Posted by Kamal

pretty deep... no official measurement, but I'd say 2.5-3" easily. If I remember to, I'll get a measurement from the edge to the center tomorrow.

Spot on! It's almost 3". Also, your Michelin looks really good on that rear! Doesn't look stretched at all compared to a Hankook or Falken tire!

Brian@bavarianx · 09-26-2011, 03:29 AM

PM's replied! Thanks Unkie for the order!

Brian@bavarianx · 09-28-2011, 02:28 PM

PM's replied

Kamal · 09-28-2011, 02:36 PM

Lawrence, do you happen to know the paint code for the centers?

anttmann · 09-28-2011, 02:56 PM

pm price shipped to 33770 please

Brian@bavarianx · 09-28-2011, 06:12 PM

Quote:

Originally Posted by Kamal

Lawrence, do you happen to know the paint code for the centers?

Unfortunately, I do not know..

PM's replied!

Brian@bavarianx · 09-29-2011, 11:36 AM

PM's replied

ippykaye · 09-30-2011, 06:20 AM

Hi Lawrence, can I double check- the spacers (5 mm) are compulsory for vibration purposes- that would drop the offset from 48 down to 43 mm in the rears?

Brian@bavarianx · 09-30-2011, 11:46 AM

Quote:

Originally Posted by ippykaye

Hi Lawrence, can I double check- the spacers (5 mm) are compulsory for vibration purposes- that would drop the offset from 48 down to 43 mm in the rears?

I would strongly advise that you use the spacers.

szcyxzh · 10-02-2011, 04:47 PM

Quote:

Originally Posted by Lawrence@bavarianx

I would strongly advise that you use the spacers.

So the rear ET is actually 43 after spacers???

adrean8j · 10-02-2011, 05:32 PM

Will these run with no rubbage on V1's lowered 0.5"-1"???

PM price to 30076

KD135 · 10-03-2011, 03:09 AM

Can you Please PM me a price to Perth, Australia, 6059

milehigh135i · 10-04-2011, 11:56 PM

I bought these rims last week and they're sweet! I was going to get pics last weekend but it rained on me

I'm running Bridgestone Potenza RE760s 225/40f 255/35r and they fit perfectly. I put the rears on w/o the spacers and the 48 offset was spot on for not requiring a fender roll. With spacers on its flush with the fender so dropping the car even 1in will require a slight roll but it would totally be worth it.

Anyway overall I'm happy with the purchase

SSSnakeman · 10-05-2011, 12:26 AM

price to 17013?

Kamal · 10-05-2011, 01:08 AM

Quote:

Originally Posted by milehigh135i

I bought these rims last week and they're sweet! I was going to get pics last weekend but it rained on me

I'm running Bridgestone Potenza RE760s 225/40f 255/35r and they fit perfectly. I put the rears on w/o the spacers and the 48 offset was spot on for not requiring a fender roll. With spacers on its flush with the fender so dropping the car even 1in will require a slight roll but it would totally be worth it.

Anyway overall I'm happy with the purchase

keeps us update on how it runs without spacers... I don't quite get why it requires spacers to prevent vibration in the first place... but oh well, I slightly rolled and pulled my fenders to prevent the rub on a stock suspension.

Unkie · 10-05-2011, 04:32 PM

Look forward to receiving these rims! BUT I paid 2 weeks ago and still don't have a tracking number or idea as to where they are. Lawrence?

1-2MANY · 10-05-2011, 06:00 PM

So without spacers it won't rub and with it may rub? on stock 135i suspension

Kamal · 10-05-2011, 06:32 PM

Quote:

Originally Posted by 1-2MANY

So without spacers it won't rub and with it may rub? on stock 135i suspension

I had a tiny bit of rub in the rear on stock suspension with the spacer, but your experiences may vary based on the tires you decide to run. I've got 255 Michelin Pilot Super Sports. Nothing that a very slight roll/pull can't take care of.

I highly recommend these rims if you're after the LM look... I've been told that people have been stopping by my car in the parking garage at work to take pictures

milehigh135i · 10-05-2011, 08:36 PM

Quote:

Originally Posted by Kamal

keeps us update on how it runs without spacers... I don't quite get why it requires spacers to prevent vibration in the first place... but oh well, I slightly rolled and pulled my fenders to prevent the rub on a stock suspension.

I ran it w/o spacers for a few days then all of a sudden I got a lot of vibration so put the spacers on and it was fine...I have no explanation for that. I also ordered 35mm lug bolts for the rear and swapped the stock ones out today. I didn't feel like there was enough thread on the stockers.

With spacers on M-Sport suspension there is no rubbing. If I decide to drop more than 1/2in I'm sure it will rub.

Also remember when you go with a wider tire it becomes slightly taller removing some of the fender gap. When I had put the 225/255's on my stock rims it closed the gap a little over 1/4in. With the new rims the gap is the same.

szcyxzh · 10-06-2011, 10:37 AM

Quote:

Originally Posted by milehigh135i

I ran it w/o spacers for a few days then all of a sudden I got a lot of vibration so put the spacers on and it was fine...I have no explanation for that. I also ordered 35mm lug bolts for the rear and swapped the stock ones out today. I didn't feel like there was enough thread on the stockers.

With spacers on M-Sport suspension there is no rubbing. If I decide to drop more than 1/2in I'm sure it will rub.

Also remember when you go with a wider tire it becomes slightly taller removing some of the fender gap. When I had put the 225/255's on my stock rims it closed the gap a little over 1/4in. With the new rims the gap is the same.

Could you update some photos? Thanks.

1DarkKnight · 10-06-2011, 11:26 AM

PM price shipped to 09012

Brian@bavarianx · 10-06-2011, 12:59 PM

Quote:

Originally Posted by 1DarkKnight

PM price shipped to 09012

Please email me at lawrence@bavarianx.com to get a quote.

Thanks

09-28-2011, 02:36 PM	#70
Kamal Indian Stig Drives: '11 328i ZMP, '12 CBR250r Join Date: May 2008 Location: StL/CoMO Posts: 1,007 iTrader: (0) Garage List 2008 BMW 135i [3.78] 2011 BMW 328i [4.00]	Lawrence, do you happen to know the paint code for the centers? __________________ 2008 E82 N54 \|\| Stage 2 -------- Gone to a good home.

09-28-2011, 02:56 PM	#71
anttmann HIGHWAYSTAR Drives: ccw'ed 135i Join Date: Apr 2011 Location: Tampa,FL Posts: 433 iTrader: (4)	pm price shipped to 33770 please __________________ HIGHWAYSTARGARAGE

10-05-2011, 04:32 PM	#82
Unkie Second Lieutenant Drives: BMW 135i Convertible Join Date: Jan 2011 Location: Sydney, Australia Posts: 201 iTrader: (0)	Look forward to receiving these rims! BUT I paid 2 weeks ago and still don't have a tracking number or idea as to where they are. Lawrence? __________________ BMW 135i AW Convertible . Steptronic . Business sat nav . Procede v5 . Berk muffler delete . GPThunder angels . iCarbon front lip . iCarbon mirrors Mitsubishi CT9A Evolution GTA . TD06-20G turbo . 3" Ti exhaust . ARC Airbox . Race Headers . ATP dump . Hybrid BOV . 100cel cat . Blitz SBC EBC . Leather Recaros . RL Coilovers . W/line Swaybar . Carbing Bracing . Hertz splits . JL W7 . 18" DTM rims + semi's

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-26-2011, 03:29 AM	#68
Brian@bavarianx Colonel Drives: E36 M3 Join Date: Feb 2011 Location: Brea, CA Posts: 2,314 iTrader: (8)	PM's replied! Thanks Unkie for the order!

09-28-2011, 02:28 PM	#69
Brian@bavarianx Colonel Drives: E36 M3 Join Date: Feb 2011 Location: Brea, CA Posts: 2,314 iTrader: (8)	PM's replied

09-29-2011, 11:36 AM	#73
Brian@bavarianx Colonel Drives: E36 M3 Join Date: Feb 2011 Location: Brea, CA Posts: 2,314 iTrader: (8)	PM's replied

09-30-2011, 06:20 AM	#74
ippykaye Lieutenant Drives: 2008 AW 135i Join Date: Feb 2011 Location: Sydney Posts: 442 iTrader: (0)	Hi Lawrence, can I double check- the spacers (5 mm) are compulsory for vibration purposes- that would drop the offset from 48 down to 43 mm in the rears?

10-03-2011, 03:09 AM	#78
KD135 Private First Class Drives: My10 BMW 135 Join Date: Sep 2011 Location: Perth Posts: 199 iTrader: (0)	Can you Please PM me a price to Perth, Australia, 6059

10-04-2011, 11:56 PM	#79
milehigh135i Private Drives: 2010 135i Join Date: Nov 2010 Location: Denver Posts: 97 iTrader: (1)	I bought these rims last week and they're sweet! I was going to get pics last weekend but it rained on me I'm running Bridgestone Potenza RE760s 225/40f 255/35r and they fit perfectly. I put the rears on w/o the spacers and the 48 offset was spot on for not requiring a fender roll. With spacers on its flush with the fender so dropping the car even 1in will require a slight roll but it would totally be worth it. Anyway overall I'm happy with the purchase

10-05-2011, 12:26 AM	#80
SSSnakeman Private First Class Drives: 330 Join Date: Apr 2011 Location: PA Posts: 110 iTrader: (3)	price to 17013?

10-05-2011, 06:00 PM	#83
1-2MANY First Lieutenant Drives: BSM 135i & 350Z Join Date: Jan 2009 Location: Austin/Plano TX Posts: 377 iTrader: (3)	So without spacers it won't rub and with it may rub? on stock 135i suspension

10-06-2011, 11:26 AM	#87
1DarkKnight New Member Drives: 135i BSM Join Date: Sep 2011 Location: Kaiserslautern, Germany Posts: 5 iTrader: (0)	PM price shipped to 09012