1M RAZE P450 unveiled at SEMA 2011 (pix & vid)

[wan888]

BMW 1M RAZE P450 Performance System
Making the M a MORE powerful letter


Custom Performance Enginering & RevoZport

BMW creates the ultimate driving machines, no doubt - but its limited to what a manufacturer can run on the road.

We are not.

Introducing the 1M RAZE P450 performance package for the BMW 1M vehicles.

A complete setup featuring a full power package engineered and manufactured by Custom Performance Engineering and a full carbon fiber outfit for weight reduction by RevoZport.

The result - 450whp and over 130lbs in weight reduction.

Unveliing the fully outfitted BMW 1M vehicle at SEMA at booth 21732 - we are proud to give the 1M owners a little something more with which to push their cars to the limit in the real M fashion.

The SEMA vehicle dubbed the "Black Knight", sponsored by a slew of high profile manufacturers like Forgeline, Moton and Performance Friction Brakes and built by cp-e™ and Piper Motorsports and wrapped in satin black by Skinz Wraps.

Full details following release at SEMA 2011 on Nov 1.

1M Raze P-450 Kit:

- cp-e upgraded front mount intercooler

- cp-e charge pipe w Tial blow off valve

- cp-e dual cone air intake

- cp-e catless down pipes

- cp-e full-race exhaust

- Alcohol Injection Systems trunk mounted meth-injection system

- Custom engine and fuel management tune

- RevoZport 1M RAZE carbon fiber vented hood

- RevoZport 1M RAZE carbon fiber 2-piece adjustable front splitter w integrated brake cooling ducts

- RevoZport 1M RAZE carbon fiber side skirts

- RevoZport 1M RAZE carbon fiber trunk

- RevoZport 1M RAZE carbon fiber trunk spoiler

- RevoZport 1M RAZE carbon fiber roof spoiler

- RevoZport 1M RAZE carbon fiber GT race wing

- RevoZport 1M RAZE carbon fiber rear diffuser with ground effect panel

- RevoZport 1M RAZE carbon fiber interior door panels


Other parts and modifications:

- AeroCatch racing hood latches

- IND blacked out side markers

- Piper Motorsport custom roll-cage and rear seat delete

- Moton Club Sport double adjustable remote reservoir coilover suspension

- AST race springs

- Turner Motorsport coilover mounts

- Vorshlag camber plates

- Forgeline GA3R 3-piece forged racing wheels

- Turner Motorsport 15mm spacers

- Turner Motorsport front and rear tow hooks

- Toyo R888 racing tires 18x12 / 18x11

- Performance Friction Z-Rated big brake kit w stainless lines

- Performance Friction RH665 racing brake fluid

- Sparco Pro2000 racing seats and mounts

- Sparco 6-point racing harnesses

- Ultimate Pedals custom racing pedals

- The Shop custom powder coating and body work

- Helix Films vinyl wrap

- SkinzWraps vinyl install and custom logos

source from:
http://cp-e.com/1M/Media.html

Video:

[James T. Kirk]

HOLY...
.

[discoboy1]

love the exhaust and rear diffuser!!!

[BrokenVert]

[Mr_M]

mmm... not too sure about this look

[James T. Kirk]

Originally Posted by bayside

mmm... not too sure about this look

Look at it this way. They're showcasing everything on one model. These models always look cluster-f**ked. Few will want to duplicate all of the options on this 1M. Individually, there are a ton of cool options.

And I tell you what, it sure beats the heck out of this disaster... http://www.1addicts.com/forums/showthread.php?t=583405 (I didn't want to spoil Raze's launch page by uploading pics.)

[Moo]

I'd love to see some performance and track times from this car.

Also, what's always intrigued me is how the rear of the side-skirt seems to have a different panel crease than our stock car. Did they actually cut into the OEM 1/4 panel, or simply covered over the original panel?

[the infamous...]

gotDAMN!! looks bad ass!

[BrokenVert]

Its a cover Moo, and extension from the skirt

[KillrM3]

Will this car be at the PRI Show in Orlando this year?

[MrRoboto]

450whp...dear lord.

[Mr_M]

their BMW n54 Dual Cone Intake System is listed for $129 . And is not better then BMS Dual Cone Performance Intake for BMW for $95 15+ hp. But the overprized aFe Dual Filter Cold Air Intake is the best looking one $359.00 27+ hp.

http://www.**********s.com/zoom_img/_1308829113.jpg

http://cp-e.com/products/bmw-135i/bm...-intake-system
http://www.burgertuning.com/intakes.html
http://afepower.com/shop/details_new...0L&&brandID=53

[M3 Adjuster]

Hmmmm I wish it wasnt the MATTE BLACK KNIGHT.. I would much prefer a simple and correct BLACK KNIGHT. . Jerez... Jet Black .. original . BSM if needed be. But otherwise.. HOLY $%^# I like it.

[superchargedman]

Originally Posted by James T. Kirk

Look at it this way. They're showcasing everything on one model. These models always look cluster-f**ked. Few will want to duplicate all of the options on this 1M. Individually, there are a ton of cool options.

And I tell you what, it sure beats the heck out of this disaster... http://www.1addicts.com/forums/showthread.php?t=583405 (I didn't want to spoil Raze's launch page by uploading pics.)

let's never speak of that abomination again. i'm liking alot of what i see above, though. are the kidneys matte, also? i like the look.

[M3 Adjuster]

Originally Posted by James T. Kirk

HOLY...

[sergeremi]

[Maximus_Prime]

Hot damn I knew this was going to be epic, but I didn't expect this...

[pearlwhites]

I wonder how much weight a vinyl wrap adds? With all the weight reduction on the car a wrap seems counterintuitive... Side skirts look good

[MusclezMarinara]

Originally Posted by pearlwhites

I wonder how much weight a vinyl wrap adds? With all the weight reduction on the car a wrap seems counterintuitive... Side skirts look good

maybe a lb !

paint adds weight lets just get them down to the bare metal !

CHECK THIS OUT http://dsigraphics.com/index.php?opt...d=47&Itemid=57

[fastauto]

would love to see more pics of the rear seat delete and the roll bar(bolt in?)

[EINSER M]

wan888, im speaking with ken c. over email and he referred to me this pic for the setting 1 lower lip. do you have any other pics that show just setting 1?

[v1k0d3n]

finally!!! a 1M that appears to be done right!!! this car is absolutely sick.

EDIT: just noticed the little roof lip spoiler in the back. wonder how much R&D went into that?