BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      02-24-2012, 05:25 AM   #23
HondaGoneRogue
0
They like my Swag...
 
HondaGoneRogue's Avatar
 
Drives: 08 AW 135i
Join Date: Aug 2008
Location: Germany

Posts: 3,567
iTrader: (4)

Garage List
2008 135i  [4.33]
GREAT job guys! I Way to step up to the plate!!
__________________

2008 AW 135i, Whats a mod?
HondaGoneRogue is offline  
Appreciate 0
Reply With Quote
      02-29-2012, 11:00 PM   #24
pb12
0
Private
 
Drives: 911
Join Date: May 2011
Location: PDX

Posts: 98
iTrader: (0)

That is the bracket I used, and it fits perfectly! One thing to be aware of though is that you will not be able to re-use the Torx bolts that hold the stock seat in place. Because of the design of the Speedware bracket, you can not drive the bolts from above. What I did was to buy 4 bolts in the same thread pitch and size, that I could drive from the side with a box-end wrench.

I am extremely pleased with this install, though I do have to put up with an airbag light. I have been told by two seperate vendors that with an airbag light, the system is in failsafe mode, which was explained to me to mean that in the event of an accident ALL airbags will deploy, not just those with an occupant. For me this was acceptable, others may not feel the same way.

For the first time in the two years of owning this car I am actually comfortable in it. I sit about two inches lower, and feel like I am sitting in the seat, not on it. I am 5'10" and the seat height is perfect. I see just over the top of the instrument binnacle, as apposed to looking through the top two inches of the windshield. I hated this car with the stock electric seat in place, now I am Really enjoying it!

Lastly, the EAS brackets advertised in this thread as being a solution for this seat, or the Recarro sliders do Not work, even a little. Just look at my photos in the first post of this thread, those are the EAS brackets. NONE of the holes line-up. For this application they are useless.

M


Quote:
Originally Posted by stephenm View Post
Did you ever have any luck with this? I'm about to put in SRDs (the older model of the speed) in my 135.

Below is my experience thus far:

I've called up VAC and talked to them, they said that the mounts they make don't work with the bottom mount seat like this. But, I did find these that might work:

http://www.speedwaremotorsports.com/...re-e82-bracket

I also have HMS looking for brackets for me, possibly getting the whole assembly from Recaro. I am thinking that I might have to have a custom mount made though because the SRDs are a little wider than the speed at the shoulder, and I might need to push the seats as far to the center as possible.

Are you installing both driver and passenger? What are you doing about airbags (the OC3 turns off the passenger)?

Last edited by pb12; 02-29-2012 at 11:05 PM.
pb12 is offline  
Appreciate 0
Reply With Quote
      03-07-2012, 06:03 PM   #25
taichi
0
Captain
 
taichi's Avatar
 
Drives: F30 & F25
Join Date: Oct 2006
Location: B.C, Canada

Posts: 894
iTrader: (6)

Garage List
Send a message via MSN to taichi
Great Job!!
__________________
some lip, some springs, some brakes, some wheels.
taichi is offline   Canada
Appreciate 0
Reply With Quote
      03-17-2012, 01:47 PM   #26
Jettafanatic
0
Private First Class
 
Jettafanatic's Avatar
 
Drives: 135i
Join Date: Sep 2009
Location: Santa Barbara, CA

Posts: 120
iTrader: (2)

I had to make a set of custom brackets ( easy to do really ) to make my Sparco Milano Prestiges fit... used the Macht Schnell floor mounts.
__________________
Legal Disclaimer: Anything I or anyone else says about my vehicle on this website(1addicts.com or any affiliated or nonaffiliated sites), pertaining to modifications, is only to gain acceptance from my/our peers, and does not actually represent anything actually existing on my car, and thus, cannot be held against me in any issues, i.e. warranty claims, that may arise.
Jettafanatic is offline   United_States
Appreciate 0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:13 PM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST