COBB AccessPORT Updates for Europe, Z4i, Z4is, 1M and New Stock Throttle Stage2+ Maps - Page 4 - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

ESC OFF · 01-18-2012, 06:57 PM

Quote:

Originally Posted by M1one1M

Does the 'M' button still function?

..... and cruise control also works (there were some issues with Cobb/N54 135 with cruise not working in the past)

M1one1M · 01-24-2012, 06:12 PM

Quote:

Originally Posted by M1one1M

Anyone know why most of the 135i in COBB's dyno database are making more power than the 1M by 30-50hp yet are not making the same amount of torque?
Link to COBB Dyno graph below.
http://accessecu.com/dyno/index.php?...rgb2=204000000

Bump?

Maybe someone from Cobb can answer?

COBB Tuning · 01-25-2012, 04:41 PM

Quote:

Originally Posted by M1one1M

Bump?

Maybe someone from Cobb can answer?

That's a case of different dynos on different days. The 135i was measured using our dyno in Portland at COBB Tuning Surgeline. The 1M was tested on our dyno at HQ in Austin. But, we will be doing some 1M testing on the Surgeline dyno soon!

Ian

Moo · 02-13-2012, 03:16 PM

What's the 0-60, 1/4 mile, and 0-100mph times for this? Without other mods.

nicoz · 02-13-2012, 08:18 PM

To Ian,

Does the M button still work with the AP? How?

Thank you

///M1 · 02-13-2012, 08:29 PM

Quote:

Originally Posted by nicoz

Does the M button still work with the AP? How?

Only with the "Non-Linear Throttle" maps.

Under the Linear Throttle maps (91 or 93 Octane) there is no difference in throttle response regardless if you activate M/Sport mode or not.

TUNEDM3 · 02-16-2012, 08:42 PM

Where Is Stage II?????????

RaihaX · 02-16-2012, 09:05 PM

is there - try updating your AP?

///M1 · 02-16-2012, 11:35 PM

Quote:

Originally Posted by TUNEDM3

Where Is Stage II?????????

Where is Stage I?

What you have is only Beta.

Gotta learn to walk before you can run

nicoz · 02-17-2012, 04:25 PM

So... what are the "numbers" with the AP?

__hp / __torque vs 335hp / 378torque

Thank you

RnmEvo9 · 02-17-2012, 11:49 PM

I don't have a 1M, however I just wanted to share my 1/4 mile results from the Cobb AP running Stage 2+FMIC. I am sure you guys could beat my time with your better tires and suspension as I only have a limited amount of mods and running the stock runflat tires. Here are my results (4037):

2008 135i
Cobb Stage 2+ Aggressive stock throttle
Helix FMIC
Raceland downpipes
1/4 tank of pump 93 octane gas
Everything else was stock! (intake, catback, wheels, tires, etc.)

Cobb gets a big thumbs up from me, however, they still need to calibrate their stage 2+ maps as there is a hiccup around 3-4k rpms. I already know they are working on that though.

Can't wait for ATR!

-cj- · 02-18-2012, 09:53 AM

^^ Very impressive times.

JekyllNoMore · 05-31-2012, 06:54 PM

Forgive if already posted but.... I was running the Cobb Stage 1 v.301 Aggressive, Linear Throttle on my 1M with cat-less downpipes and Akrapovic evolution full exhaust. Recently, the CEL has been coming on with catalytic conversion error codes after moderate/hard acceleration, so I've had to clear the codes repeatedly. Decided to finally try a firmware update on the CobbAP... but my Stock map (and indeed all maps!) seems to have disappeared! Getting the Stage 1 v.301 back from Cobb's website was no problem (currently trying v.401 Aggressive, Stock Throttle). But how do I get my Stock map back (for dealer visits etc...)???

Any advice (other than prayer)?

EINSER M · 06-02-2012, 06:30 PM

Cobb: any updated ETA on stage 1 + and stage 2 maps for the 1M??????

phrenetiK · 06-11-2012, 10:56 AM

Quote:

Originally Posted by JekyllNoMore

Forgive if already posted but.... I was running the Cobb Stage 1 v.301 Aggressive, Linear Throttle on my 1M with cat-less downpipes and Akrapovic evolution full exhaust. Recently, the CEL has been coming on with catalytic conversion error codes after moderate/hard acceleration, so I've had to clear the codes repeatedly. Decided to finally try a firmware update on the CobbAP... but my Stock map (and indeed all maps!) seems to have disappeared! Getting the Stage 1 v.301 back from Cobb's website was no problem (currently trying v.401 Aggressive, Stock Throttle). But how do I get my Stock map back (for dealer visits etc...)???

Any advice (other than prayer)?

sounds scary :d

Em/1 · 06-11-2012, 11:22 AM

Quote:

Originally Posted by RnmEvo9

I don't have a 1M, however I just wanted to share my 1/4 mile results from the Cobb AP running Stage 2+FMIC. I am sure you guys could beat my time with your better tires and suspension as I only have a limited amount of mods and running the stock runflat tires. Here are my results (4037):

2008 135i
Cobb Stage 2+ Aggressive stock throttle
Helix FMIC
Raceland downpipes
1/4 tank of pump 93 octane gas
Everything else was stock! (intake, catback, wheels, tires, etc.)

Cobb gets a big thumbs up from me, however, they still need to calibrate their stage 2+ maps as there is a hiccup around 3-4k rpms. I already know they are working on that though.

Can't wait for ATR!

WOW! I have a 1M and would be very happy with that for the mods you have done; guess I have to put the Cobb back in the mix--I was leaning towards GIAC or Evolve.

Das Ein · 06-11-2012, 11:59 AM

Quote:

Originally Posted by EINSER M

Cobb: any updated ETA on stage 1 + and stage 2 maps for the 1M??????

Yeah, what's the deal-e-o?

EINSER M · 06-11-2012, 12:18 PM

Quote:

Originally Posted by Das Ein

Yeah, what's the deal-e-o?

... nada

-cj- · 07-09-2012, 12:13 AM

I saw some beta stage2 maps on Cobb's site.. Anyone running them yet? Any feedback?

Edit: I just noticed Access Tuner Race is also available! Wow...

Das Ein · 07-09-2012, 11:39 AM

Quote:

Originally Posted by -cj-

I saw some beta stage2 maps on Cobb's site.. Anyone running them yet? Any feedback?

Edit: I just noticed Access Tuner Race is also available! Wow...

I installed the stage 2+ map on Saturday. WOW!!!

Thanks Cobb!

-cj- · 07-09-2012, 02:09 PM

Quote:

Originally Posted by Das Ein

I installed the stage 2+ map on Saturday. WOW!!!

Thanks Cobb!

Awesome. What were you using before, stage1? Any experience with JB4 or other tunes?

I tried stage1, but was disappointed in drivability (boost came on waaay too quickly for no reason... even with the stock throttle mapping) and power compared to my JB4. Things got even better with 'auto-learning' (map 5) on the JB4, while I waited on Cobb to release a stage2 map...

I'm wondering how stage2 compares. I'll most likely flash it tonight, but I was hoping for some information to hold me over.

-cj- · 07-10-2012, 12:09 AM

... Ok, so you guys made me wait until this evening when I re-installed my Cobb AP...

Wow, stage2 is crazy. Perhaps too crazy. Is it really supposed to be spiking 19 psi and holding 17-18?? (Stage2 aggressive map). Drivability is far better then stage1.. And compared to JB4 w/ map2 or map5, this is way faster!

02-16-2012, 08:42 PM	#73
TUNEDM3 Stay Ripping Drives: 1M Join Date: Sep 2008 Location: New York Posts: 406 iTrader: (3)	Where Is Stage II????????? __________________ THE GOBBLER- S.O.H

06-02-2012, 06:30 PM	#80
EINSER M Brigadier General Drives: 2011 E82 1M Join Date: May 2006 Location: 34.1064° N, 117.5922° W, 300m altitude Posts: 4,539 iTrader: (29) Garage List 2011 E82 1M \| CURRENT [3.84] 2012 E82 135 \| CURRENT [2.00] 2011 E90 335 \| CURRENT [4.33] 2006 E60 550 \| CURRENT [0.00] 2007 E85 Z4M\| SOLD [1.50] 2003 E53 X5 4.6is S ... [4.50] 2008 E92 328 \| SOLD [0.00] 2008 E82 135 \| SOLD [0.00] 2008 E90 335 \| SOLD [0.00] 2003 E46 M3 \| SOLD [3.75] 2006 E90 330 \| SOLD [5.00] 2003 E46 330ZHP \| SOLD [0.00]	Cobb: any updated ETA on stage 1 + and stage 2 maps for the 1M?????? __________________ 2011 E82 1M AW \| 419 of 740 CLICK HERE: EINSER M's Темникова E82 AW 1M build thread

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-13-2012, 03:16 PM	#70
Moo Gold Member Drives: PSYWGN Join Date: Apr 2010 Location: Studio 69 Posts: 418 iTrader: (0)	What's the 0-60, 1/4 mile, and 0-100mph times for this? Without other mods.

02-13-2012, 08:18 PM	#71
nicoz Private First Class Drives: 1M Join Date: May 2011 Location: Montreal Posts: 108 iTrader: (0)	To Ian, Does the M button still work with the AP? How? Thank you

02-16-2012, 09:05 PM	#74
RaihaX Major General Drives: 08' 135i Join Date: Aug 2008 Location: Australia, Perth Posts: 5,030 iTrader: (2)	is there - try updating your AP?

02-17-2012, 04:25 PM	#76
nicoz Private First Class Drives: 1M Join Date: May 2011 Location: Montreal Posts: 108 iTrader: (0)	So... what are the "numbers" with the AP? __hp / __torque vs 335hp / 378torque Thank you

02-17-2012, 11:49 PM	#77
RnmEvo9 Lieutenant Colonel Drives: 2008 135i Join Date: Apr 2011 Location: Pembroke Pines, FL Posts: 1,641 iTrader: (2)	I don't have a 1M, however I just wanted to share my 1/4 mile results from the Cobb AP running Stage 2+FMIC. I am sure you guys could beat my time with your better tires and suspension as I only have a limited amount of mods and running the stock runflat tires. Here are my results (4037): 2008 135i Cobb Stage 2+ Aggressive stock throttle Helix FMIC Raceland downpipes 1/4 tank of pump 93 octane gas Everything else was stock! (intake, catback, wheels, tires, etc.) Cobb gets a big thumbs up from me, however, they still need to calibrate their stage 2+ maps as there is a hiccup around 3-4k rpms. I already know they are working on that though. Can't wait for ATR!

02-18-2012, 09:53 AM	#78
-cj- Second Lieutenant Drives: 2011 AW 1M \| 2009 Red M3 DCT Join Date: Dec 2011 Location: Toronto Posts: 281 iTrader: (1)	^^ Very impressive times.

05-31-2012, 06:54 PM	#79
JekyllNoMore New Member Drives: 1M Join Date: Nov 2011 Location: Vancouver Posts: 16 iTrader: (0)	Forgive if already posted but.... I was running the Cobb Stage 1 v.301 Aggressive, Linear Throttle on my 1M with cat-less downpipes and Akrapovic evolution full exhaust. Recently, the CEL has been coming on with catalytic conversion error codes after moderate/hard acceleration, so I've had to clear the codes repeatedly. Decided to finally try a firmware update on the CobbAP... but my Stock map (and indeed all maps!) seems to have disappeared! Getting the Stage 1 v.301 back from Cobb's website was no problem (currently trying v.401 Aggressive, Stock Throttle). But how do I get my Stock map back (for dealer visits etc...)??? Any advice (other than prayer)?

07-09-2012, 12:13 AM	#85
-cj- Second Lieutenant Drives: 2011 AW 1M \| 2009 Red M3 DCT Join Date: Dec 2011 Location: Toronto Posts: 281 iTrader: (1)	I saw some beta stage2 maps on Cobb's site.. Anyone running them yet? Any feedback? Edit: I just noticed Access Tuner Race is also available! Wow...

07-10-2012, 12:09 AM	#88
-cj- Second Lieutenant Drives: 2011 AW 1M \| 2009 Red M3 DCT Join Date: Dec 2011 Location: Toronto Posts: 281 iTrader: (1)	... Ok, so you guys made me wait until this evening when I re-installed my Cobb AP... Wow, stage2 is crazy. Perhaps too crazy. Is it really supposed to be spiking 19 psi and holding 17-18?? (Stage2 aggressive map). Drivability is far better then stage1.. And compared to JB4 w/ map2 or map5, this is way faster!