BMW 1M with Evolve Exhaust, Evolve FMIC and Evolve Flash - Page 2 - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

marcel b · 01-18-2012, 10:38 PM

Quote:

Originally Posted by ///M1

Nice results, but how does that nearly 50 wheel TQ sharp loss from ~ 2800-3100 RPM affect drivability? I've noticed other aftermarket tunes also exhibit such non-linearity.

You missed the comment "NB. The spike at 2750RPM is caused by the car being released after being held under load on the dyno. It is not present while driving the car on the road."
There is no spike on the road, so also no big drop;-)

///M1 · 01-18-2012, 10:44 PM

Quote:

Originally Posted by marcel b

You missed the comment "NB. The spike at 2750RPM is caused by the car being released after being held under load on the dyno. It is not present while driving the car on the road."
There is no spike on the road, so also no big drop;-)

Duh, next time I should read better, thx for pointing it out

However I've seen some low-RPM jagged curves from tuners (e.g. COBB Beta tune is pretty non-linear down low). Good to see this not being the case here.

ADVANT123 · 01-18-2012, 11:36 PM

Finally someone makes an upgraded intercooler that uses factory couplers and doesn't require cutting/trimming! Any datalogs to compare IATs pre/post intercooler install?

flipm3 · 01-19-2012, 12:03 AM

Great work as always Evolve.

I just regret not ordering a BMW 1M now...

Powerbeast · 01-19-2012, 12:51 AM

Impressive!!!

Imran@Evolve · 01-19-2012, 07:52 AM

Quote:

Originally Posted by ADVANT123

Finally someone makes an upgraded intercooler that uses factory couplers and doesn't require cutting/trimming! Any datalogs to compare IATs pre/post intercooler install?

Coming shortly. Just collating the information.

Imran@Evolve · 01-19-2012, 08:07 AM

Quote:

Originally Posted by BMW Gator

Imran,
Do you have graphs of a/f ratios and/or boost or can you tell us the max psi of boost for your tune?

Yes I should have these in the database. I will post them.

Imran@Evolve · 01-19-2012, 11:41 AM

Quote:

Originally Posted by wkndwrrr

eta on pricing info?

Pricing will be finalised today/tomorrow.

wkndwrrr · 01-20-2012, 04:41 PM

any news? an estimate?

Imran@Evolve · 01-21-2012, 07:24 AM

RRP on the rear bolt on section will be $1606. We will have some intro discounts running for the first batch of 20. We are carrying out another dyno test on Tuesday to verify the results of the exhaust on a stock car and will do a detailed post with further information.

Rikx1M · 01-21-2012, 08:12 AM

Interested in tune, intercooler and exhaust with black tips...pricing? Any drone?

Imran@Evolve · 01-21-2012, 08:48 AM

Quote:

Originally Posted by Rikx1M

Interested in tune, intercooler and exhaust with black tips...pricing? Any drone?

No drone with just the rear box. Pricing for exhaust in post above. RRP on the FMIC will be $1046 and the tune is currently on special for $750.

We can work out some package prices also.

MrRoboto · 01-21-2012, 09:02 AM

Quote:

Originally Posted by Rikx1M

Interested in tune, intercooler and exhaust with black tips...pricing? Any drone?

I am in for the black tips as well. How many do we need to run a batch with black tips?

Imran@Evolve · 01-21-2012, 09:08 AM

Quote:

Originally Posted by MrRoboto

I am in for the black tips as well. How many do we need to run a batch with black tips?

We will need 5 orders of black tips to do this.

azmurciev12 · 01-21-2012, 10:50 AM

imran,

i bought the evolve r from your US website. i plan to run upgraded i/c, catless d/p, resonated midpipe and Afe intake. i'm going to install all of this at the same time as the tune. my question is:

will you be able to give me more specified tune to take advantage of the mods that i have?

thanks.

Imran@Evolve · 01-23-2012, 11:51 AM

Quote:

Originally Posted by azmurciev12

imran,

i bought the evolve r from your US website. i plan to run upgraded i/c, catless d/p, resonated midpipe and Afe intake. i'm going to install all of this at the same time as the tune. my question is:

will you be able to give me more specified tune to take advantage of the mods that i have?

thanks.

Hi

Thanks for your order.

Yes we will do that.

Angerman · 01-23-2012, 01:11 PM

Do want

-Z- · 01-23-2012, 01:30 PM

Quote:

The sound is deisgned to be sporty without any drone inside the cabin.

Spell check

Thibs · 01-23-2012, 10:35 PM

Quote:

Originally Posted by Imran@Evolve

We will need 5 orders of black tips to do this.

I would like black tips as well

Imran@Evolve · 01-24-2012, 05:01 AM

Quote:

Originally Posted by -Z-

Spell check

Thanks for the heads up

Aussie_in_London · 01-24-2012, 05:41 AM

What price are we looking at in £ for the exhaust?

Imran@Evolve · 01-24-2012, 05:59 AM

Quote:

Originally Posted by Aussie_in_London

What price are we looking at in £ for the exhaust?

RRP is £1399 GBP inc VAT. We are going to set up a group buy/introductory discount as there is a lot of interest for it at the moment. We have a batch of 20 coming in a few weeks.

I have another 1M coming in shortly so I can verify the power gains for the exhaust before we release.

01-18-2012, 11:36 PM	#25
ADVANT123 Second Lieutenant Drives: 1M Join Date: Jul 2009 Location: NJ Posts: 260 iTrader: (0)	Finally someone makes an upgraded intercooler that uses factory couplers and doesn't require cutting/trimming! Any datalogs to compare IATs pre/post intercooler install? __________________ 2011 Valencia Orange 1M - Weekend Warrior 2013 Acura RDX - Daily

01-19-2012, 12:03 AM	#26
flipm3 E46 + E90 Drives: E46 M3 + E90 M3 Join Date: Jul 2008 Location: Illinois Posts: 2,516 iTrader: (1) Garage List 2009 BMW M3 [0.00] 2002 BMW M3 [0.00]	Great work as always Evolve. I just regret not ordering a BMW 1M now... __________________ 2002 E46 M3 6MT \| Jet Black . Black Nappa \| My Build Thread 2009 E90 M3 DCT \| Melbourne Red . Speed Cloth

01-23-2012, 01:11 PM	#39
Angerman Spoolin' and Droolin' Drives: 08 135i 6MT Join Date: Jan 2012 Location: Maryland Posts: 910 iTrader: (0)	Do want __________________ Old\| 2005 s2000: KPRO, Invidia q300 v4, PLM header, BERK 70mm HFC, Vortech v2 (3.6" Reichard Pulley), FMIC, ID 725cc (397whp/243tq @9psi, Tuned at Innovative Motorworks. New\| 2008 135i: COBB Stage 2+, ER CP, TiAL Q, BMS OCC, BMS DCI, Active Autowerke 2.0 Sport FMIC, VRSF 3" DPs, CP-E Axleback, Robs' PCV. Coming Soon: AMS FMIC, welded 3" cold piping; Protuning Freaks Protune

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-19-2012, 12:51 AM	#27
Powerbeast Major General Drives: E90 M3 Dakar Yellow Join Date: Mar 2009 Location: SoCal Posts: 5,526 iTrader: (4)	Impressive!!!

01-20-2012, 04:41 PM	#31
wkndwrrr Private First Class Drives: 1M Join Date: Oct 2011 Location: Canada Posts: 182 iTrader: (0)	any news? an estimate?

01-21-2012, 07:24 AM	#32
Imran@Evolve Drives: E60 M5, E92 M3, R56 MCS Join Date: Jun 2008 Location: Bedfordshire UK Posts: 1,584 iTrader: (0)	RRP on the rear bolt on section will be $1606. We will have some intro discounts running for the first batch of 20. We are carrying out another dyno test on Tuesday to verify the results of the exhaust on a stock car and will do a detailed post with further information.

01-21-2012, 08:12 AM	#33
Rikx1M MSgt (ret) Drives: VO 1M #739/740 Join Date: May 2010 Location: Heidelberg Germany Posts: 1,544 iTrader: (2) Garage List 2011 BMW 1 series M ... [5.00]	Interested in tune, intercooler and exhaust with black tips...pricing? Any drone?

01-21-2012, 10:50 AM	#37
azmurciev12 Enlisted Member Drives: 1M VO Join Date: Jan 2012 Location: RP Posts: 41 iTrader: (0)	imran, i bought the evolve r from your US website. i plan to run upgraded i/c, catless d/p, resonated midpipe and Afe intake. i'm going to install all of this at the same time as the tune. my question is: will you be able to give me more specified tune to take advantage of the mods that i have? thanks.

01-24-2012, 05:41 AM	#43
Aussie_in_London Lieutenant Colonel Drives: 1M & track built Astra OPC Join Date: Apr 2011 Location: London Posts: 1,522 iTrader: (0)	What price are we looking at in £ for the exhaust?