Braking system Performance,UPgrade М - Page 3 - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

Dackelone · 02-06-2012, 02:54 PM

Quote:

Originally Posted by dieselspeed

We build the brake caliper by himself. You can put it in a 1M and M3

Dieselspeed... can you tell us more about the 135i big brake kit? How much does the caliper adpator cost? What brake rotor is that? Some people think it could be the e46 M3 two piece rotor. ?

dieselspeed · 02-06-2012, 03:00 PM

Quote:

Originally Posted by Dackelone

Dieselspeed... can you tell us more about the 135i big brake kit? How much does the caliper adpator cost? What brake rotor is that? Some people think it could be the e46 M3 two piece rotor. ?

No, it is the Stock Disk from 1M, or M3(E92).
You need only the 6 Piston Caliper and the dieselspeed adapter in your 1M.
We build it only for 1M or M3 (E92)
It cost 2.150,- Euro

Dackelone · 02-06-2012, 03:06 PM

Quote:

Originally Posted by dieselspeed

No, it is the Stock Disk from 1M, or M3(E92).
You need only the 6 Piston Caliper and the dieselspeed adapter in your 1M.
We build it only for 1M or M3 (E92)
It cost 2.150,- Euro

Ohh. So you use the 135i brake caliper on a 1M ?

dieselspeed · 02-06-2012, 03:09 PM

Quote:

Originally Posted by Dackelone

Ohh. So you use the 135i brake caliper on a 1M ?

It is a 6 piston race caliper from Stop Tech.
It is nothing from 135i.

pixelblue · 02-06-2012, 03:19 PM

wait, the pictures were from a 135 with your adaptor! what am I missing here? you're not making any sense.

Dackelone · 02-06-2012, 03:29 PM

Quote:

Originally Posted by dieselspeed

It is a 6 piston race caliper from Stop Tech.
It is nothing from 135i.

Ok. I think we are talking about two different braking kits.

YOU are talking about the 1M that was in the Sieben Getuned AutoBild article.

WE are talking about the brakes shown in THIS THREAD> on page one and page two of this thread.

Please go look at: Post #1, post #16, post #27 & #28.

Do you make that "DieselBoost" metal brake adaptor?

Do you make this adaptor in gold/Gelb? --->
Name: DieselBoost_345_28_14.jpg
Views: 486
Size: 134.7 KB

Name: DieselBoost_345_28_14.jpg
Views: 486
Size: 134.7 KB

Name: DieselBoost345_28_16.jpg
Views: 482
Size: 137.5 KB

Name: DieselBoost345_28_17.jpg
Views: 483
Size: 157.7 KB

dieselspeed · 02-06-2012, 03:41 PM

Quote:

Originally Posted by Dackelone

Ok. I think we are talking about two different braking kits.

YOU are talking about the 1M that was in the Sieben Getuned AutoBild article.

WE are talking about the brakes shown in THIS THREAD> on page one and page two of this thread.

Please go look at: Post #1, post #16, post #27 & #28.

Do you make that "DieselBoost" metal brake adaptor?

Do you make this adaptor in gold/Gelb? --->
Attachment 641007

Attachment 641008

Attachment 641009

Yes, we are talking about 2 different brake kits.

This brake kit (adapter), in post #1 and the other, are not from us.
We dont build brake adapters with name "dieselBoost"
We build only with name "dieselspeed"
Give me your e-mail, I will send you a picture from the dieselspeed adapter.

Focusedintntions · 02-06-2012, 03:50 PM

Ok so 2 different manufacturers in here...weird

pixelblue · 02-06-2012, 04:38 PM

yeah like this thread wasn't weird already.

fourtailpipes · 02-21-2012, 11:55 PM

i know this thread sank like a rock a couple weeks ago, but i really want this to exist! any vendors with machine shops want to PM me a quote for a one-off?

HP Autowerks · 02-23-2012, 11:53 AM

Quote:

Originally Posted by Dackelone

135i rotors = 338mm X 26mm's
1M rotors = 360mm X 30mm's

I am not so sure that red brake caliper is a 135i unit though. It looks more slender. ? It odes have those harmonic ballancers on the ends though.

Dack

They are the 135i calipers or similar. Brembo aftermarket calipers do not the brake lines fitted in such a way.

Dackelone · 02-23-2012, 12:10 PM

I don't understand why no one has made a brake caliper adapter to mount decent Brembos to our 1er's! You would think someone would have come out with a "poor mans" BBK by now. I think using some used Porsche Brembo's and metal adaptor and some off the shelf //M rotors would be the ticket! Such a simple request but no one seems to offer us a low budget big brake kit package.

RimasRS · 02-23-2012, 01:34 PM

Quote:

Originally Posted by Dackelone

I don't understand why no one has made a brake caliper adapter to mount decent Brembos to our 1er's! You would think someone would have come out with a "poor mans" BBK by now. I think using some used Porsche Brembo's and metal adaptor and some off the shelf //M rotors would be the ticket! Such a simple request but no one seems to offer us a low budget big brake kit package.

I was talking with diesel boost he is from Russia. And those adapters are for our 135i brakes to fit M3 e46 motorsport edition rotors and pads. Only problem that you losing ability to fit 17 inch winter wheels and even not all 18 inch wheels will fit on them. Price of adapters if I remember well 8000 rubles you can convert them online it would be something around 200 euro w/o shipping. BTW he mentioned that local pick up is possible, not sure do they ship at all.

HP Autowerks · 02-23-2012, 02:23 PM

Quote:

Originally Posted by Dackelone

I don't understand why no one has made a brake caliper adapter to mount decent Brembos to our 1er's! You would think someone would have come out with a "poor mans" BBK by now. I think using some used Porsche Brembo's and metal adaptor and some off the shelf //M rotors would be the ticket! Such a simple request but no one seems to offer us a low budget big brake kit package.

Have you tried a good two-piece rotor with better vane design for more air flow? Add a decent set of pads front and rear and you have an improved system over stock. Not to mention you will take off about 5 lbs on each of the front corners of the vehicle.

http://www.1addicts.com/forums/showt...1#post11407091

RimasRS · 02-23-2012, 03:21 PM

Oh yeah and this ^^^ will be cheap solution

Dackelone · 02-23-2012, 05:08 PM

RimasRS... well... even the 1M/M3 brake rotors are $336 each! So $700ish isn't that bad. Still... I too was hoping for a cheap(poor mans) BBK upgrade for say $500ish.

pixelblue · 02-23-2012, 05:36 PM

Quote:

Originally Posted by Dackelone

RimasRS... well... even the 1M/M3 brake rotors are $336 each! So $700ish isn't that bad. Still... I too was hoping for a cheap(poor mans) BBK upgrade for say $500ish.

Dack,
if you remember there may be more options in the works!

Dackelone · 02-23-2012, 05:39 PM

^^YuP!

BiscottiGelato · 02-23-2012, 10:22 PM

Isn't those rotors these? For the Z4M?
http://www.realoem.com/bmw/showparts...=34&fg=07&hl=4
GetBMWParts got them for $214 a piece.

Are these any better than the RB ones? Closer to OE thickness perhaps?

Focusedintntions · 02-24-2012, 07:48 AM

You're not going to beat the RB rotors. They're practically works of art lol

fourtailpipes · 02-24-2012, 02:34 PM

Quote:

Originally Posted by Focusedintntions

You're not going to beat the RB rotors. They're practically works of art lol

they're very nice, but there's something to be said for an increase in diameter too. ultimately i'm still holding out for a matching front and rear floating setup. ECS does this for audis, including affordable caliper upgrades as well (using the very nice 6-pot cayenne calipers). When are we due for some similar consideration?

JB135MDCT · 02-24-2012, 07:47 PM

+1

02-06-2012, 03:19 PM	#49
pixelblue Colonel Drives: the silver bullet Join Date: Feb 2010 Location: northern virginia Posts: 2,199 iTrader: (2) Garage List 2010 135i [4.37]	wait, the pictures were from a 135 with your adaptor! what am I missing here? you're not making any sense. __________________ "I would quote everything pixelblue said, but you've already read it. Take it from someone who's put the 1 through its paces"

02-06-2012, 03:50 PM	#52
Focusedintntions Colonel Drives: 2011 135i M-Sport :D Join Date: Nov 2010 Location: NoVA Posts: 2,590 iTrader: (1)	Ok so 2 different manufacturers in here...weird __________________ Faster, faster, faster, until the thrill of speed overcomes the fear of death… – Hunter Thompson

02-06-2012, 04:38 PM	#53
pixelblue Colonel Drives: the silver bullet Join Date: Feb 2010 Location: northern virginia Posts: 2,199 iTrader: (2) Garage List 2010 135i [4.37]	yeah like this thread wasn't weird already. __________________ "I would quote everything pixelblue said, but you've already read it. Take it from someone who's put the 1 through its paces"

02-24-2012, 07:48 AM	#64
Focusedintntions Colonel Drives: 2011 135i M-Sport :D Join Date: Nov 2010 Location: NoVA Posts: 2,590 iTrader: (1)	You're not going to beat the RB rotors. They're practically works of art lol __________________ Faster, faster, faster, until the thrill of speed overcomes the fear of death… – Hunter Thompson

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-21-2012, 11:55 PM	#54
fourtailpipes Major Drives: OPCs Join Date: Dec 2008 Location: Work Posts: 1,156 iTrader: (0)	i know this thread sank like a rock a couple weeks ago, but i really want this to exist! any vendors with machine shops want to PM me a quote for a one-off?

02-23-2012, 12:10 PM	#56
Dackelone Moderator Drives: 135i Silber mit/Rot 6MT N54 Join Date: Feb 2010 Location: Bayern, Germany Posts: 13,328 iTrader: (0)	I don't understand why no one has made a brake caliper adapter to mount decent Brembos to our 1er's! You would think someone would have come out with a "poor mans" BBK by now. I think using some used Porsche Brembo's and metal adaptor and some off the shelf //M rotors would be the ticket! Such a simple request but no one seems to offer us a low budget big brake kit package.

02-23-2012, 03:21 PM	#59
RimasRS Lieutenant Colonel Drives: 135i MT 2009 AW Join Date: Sep 2010 Location: Europe Posts: 1,749 iTrader: (0)	Oh yeah and this ^^^ will be cheap solution

02-23-2012, 05:08 PM	#60
Dackelone Moderator Drives: 135i Silber mit/Rot 6MT N54 Join Date: Feb 2010 Location: Bayern, Germany Posts: 13,328 iTrader: (0)	RimasRS... well... even the 1M/M3 brake rotors are $336 each! So $700ish isn't that bad. Still... I too was hoping for a cheap(poor mans) BBK upgrade for say $500ish.

02-23-2012, 05:39 PM	#62
Dackelone Moderator Drives: 135i Silber mit/Rot 6MT N54 Join Date: Feb 2010 Location: Bayern, Germany Posts: 13,328 iTrader: (0)	^^YuP!

02-23-2012, 10:22 PM	#63
BiscottiGelato Lieutenant Drives: 09 135i M Sport 6MT Join Date: Nov 2006 Location: GVA Posts: 583 iTrader: (1)	Isn't those rotors these? For the Z4M? http://www.realoem.com/bmw/showparts...=34&fg=07&hl=4 GetBMWParts got them for $214 a piece. Are these any better than the RB ones? Closer to OE thickness perhaps?

02-24-2012, 07:47 PM	#66
JB135MDCT I'm just a cook Drives: 2011 135i DCT Join Date: May 2010 Location: MD Posts: 943 iTrader: (0)	+1