FORUMS
- 5
![]() |
|
|
![]() |
| 04-03-2012, 11:16 PM | #1 |
|
Second Lieutenant
![]() |
M3 sfb install at FasTrack
Hey everyone,
If you want to get subframe bushings installed on your 135, Scott at FasTrack in Peabody is a great place to go. He's willing to do the install for $550 + tool rental. if anyone's interested in a "group buy", Scott would be willing to book a bunch of installs during a 2-week rental of the tool. My first impressions of having the M3 bushings is a noticeable lack of squishiness over bumps and while going WOT coming out of corners. No negatives noticed at all. I plan on autox this car at some point this summer and will give more impressions after that. Tim
__________________
2008 135i | Dinan Stg 2 | APEX Arc8 | 255/235 RS3s | Vorshlag camber (-2.5) | Eibach Pro | Koni Yellows | E92 M3 arb | M3 front bits | Stoptech Street Perf pads | Droid TrackMaster for lap timing & Torque for OBD data
|
![]() |
|
| 04-07-2012, 11:54 PM | #2 |
|
The Stig
|
Where did u buy the bushings and how much did u pay if u don't mind me asking...
__________________
![]() 2008 AW/BL 135illMods: JB4 G5 ISO, 2Step, Raceland DPs,Turbo Back Straight Pipes, BMS DCI, ER CP, HKS BOV, CM10 METH, P3 Vent Gauge Dragstrip: 1.81 60ft 12.2@113 NO METH DynoDayhttp://www.n54tech.com/forums/showthread.php?t=15337 |
![]() |
|
| 04-12-2012, 09:13 PM | #3 |
|
winter mode
Drives: 08 135i, 88 M3 Join Date: Aug 2008
Location: Somerville, MA
|
funny story...
__________________
88 M3: BMWCCA J Sport
08 135: because streetcar ![]() |
![]() |
|
| 04-13-2012, 08:54 AM | #4 |
|
Second Lieutenant
![]() |
So true...
I bought them from hpashop. Sold them to and1, then bought them back from him a few months later.
__________________
2008 135i | Dinan Stg 2 | APEX Arc8 | 255/235 RS3s | Vorshlag camber (-2.5) | Eibach Pro | Koni Yellows | E92 M3 arb | M3 front bits | Stoptech Street Perf pads | Droid TrackMaster for lap timing & Torque for OBD data
|
![]() |
|
| 05-01-2012, 08:47 PM | #5 |
|
Major
![]() |
So I got my SFB, M3 front control arms, brake fluid flush, and 4 tires mounted/balanced at Fastrack. I know Tim and other people have had a good experience there, but I feel like I never have goodluck with anyone working on my car. I wasn't going to say anything but after tonight I couldn't hold back anymore. 4 bolts were left loose (1 fell out) on what I think is called the rear subframe cross brace. I told them about the missing bolt and one was sent to me in a paper envelope. Unfortunately, the only thing I received in the mail was an empty envelope ripped in half. My rear diffuser had a gouge in it. I know it was not there prior to bringing it in. Anyone who knows me well, knows I'm very particular about my cars paint. With that said, I know EVERY blemish on my car. What led me to finally posting this was I always felt like my tires were out of balance since Fastrack balanced them. I had them rebalanced this evening at a different shop (FunHonda) and 3 out of 4 tires were not balanced. I know, I could take it back but I'd rather not expose my car to further mistreatment. Rant over
Sorry Tim |
|
|
|
| 05-10-2012, 06:21 PM | #6 |
|
Second Lieutenant
![]() |
Hey Brian,
Scott's got a great reputation on the COM and NE--SVT forums. One time they messed up an alignment, but i brought it back and he re-did the whole thing. they put a rollbar in my Miata, installed endlinks (he used a blowtorch to remove the endlinks i couldn't get off myself - rusted through bolts). several alignments and a bunch of suspension parts to my 1er. He's done right by me. If i wasn't happy with something, i'd give him a chance to make it right. Sorry you had such a bad experience.
__________________
2008 135i | Dinan Stg 2 | APEX Arc8 | 255/235 RS3s | Vorshlag camber (-2.5) | Eibach Pro | Koni Yellows | E92 M3 arb | M3 front bits | Stoptech Street Perf pads | Droid TrackMaster for lap timing & Torque for OBD data
|
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|