CPE

[135iguy10]

Does anyone have any of these mods on their 1er, below is my plan.

Im thinking these are my Next mods : fmic, exhaust with highflow cat bov and intake from CPE along with stage 2 aggressive AccessPort tune.

I'm told 400hp is where I should be at.

[NorthwestN54]

Make sure that exhaust includes downpipes. 400 is fairly close, I got around 365 rwhp with similar mods but that's with 91 octane. If you have 93 around where you live, it would be alot closer to 400.

Shouldn't really run stage2 without dps, but if you do get the dps and have an intercooler, run stage 2+ fmic. It's a large bump over stage 2.

[135iguy10]

Originally Posted by NorthwestN54

Make sure that exhaust includes downpipes. 400 is fairly close, I got around 365 rwhp with similar mods but that's with 91 octane. If you have 93 around where you live, it would be alot closer to 400.

Shouldn't really run stage2 without dps, but if you do get the dps and have an intercooler, run stage 2+ fmic. It's a large bump over stage 2.

Thanks a lot! Hmm this thread does help. I'm doing this next summer since I just did H&R sways & KW V1 coilovers. ...you don't have 93? Thts odd. Where do u live?

[ken1137]

+1 on DP's with the other bolt ons. CPE has them available but I like AR DPs

[135iguy10]

Originally Posted by ken1137

+1 on DP's with the other bolt ons. CPE has them available but I like AR DPs

Thanks for the advice. I can't wait to put these parts in