Carbon sideskirts for non-m`s?? - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

AnooooOH · 05-20-2012, 10:00 AM

Is there something like this for the non-m??
I`D love to have them under my performance sides...

AnooooOH · 05-20-2012, 10:32 AM

here are some more:

Satalite · 05-20-2012, 11:14 AM

Not that I know of..

Sylon · 05-20-2012, 09:17 PM

I would love to get a set like that if someone sold them.

Eddie135 · 05-20-2012, 09:53 PM

+1, awesome.

cooler2442 · 05-20-2012, 10:31 PM

Quote:

Originally Posted by AnooooOH

here are some more:

Quote:

Originally Posted by Sylon

I would love to get a set like that if someone sold them.

Quote:

Originally Posted by Eddie135

+1, awesome.

SLeK is currently in the design phase of manufacturing something exactly like this for our cars. I will be dropping my car off soon for measurements to get this made.

Sylon · 05-20-2012, 10:47 PM

Quote:

Originally Posted by cooler2442

SLeK is currently in the design phase of manufacturing something exactly like this for our cars. I will be dropping my car off soon for measurements to get this made.

You just put my plans to get some BMW Performance sideskirts on hold. Please keep us informed on this!

cooler2442 · 05-20-2012, 10:54 PM

Quote:

Originally Posted by Sylon

You just put my plans to get some BMW Performance sideskirts on hold. Please keep us informed on this!

Only information I have so far is that they will be made out of 100% carbon fiber and look similar to the 3 series picture up above.

WOLF-PACK · 05-21-2012, 12:08 AM

Quote:

Originally Posted by cooler2442

Only information I have so far is that they will be made out of 100% carbon fiber and look similar to the 3 series picture up above.

I would be in!

Been looking for something like this to complete my exterior... Keep me posted

Sylon · 05-21-2012, 09:18 AM

Quote:

Originally Posted by cooler2442

Only information I have so far is that they will be made out of 100% carbon fiber and look similar to the 3 series picture up above.

You mean just that strip of CF under the skirt? Well, that means they could run on the performance skirts too, wouldn't you think?

1LazyBmw · 05-21-2012, 11:04 AM

Can't wait.. I know LTBMW makes custom ones but none for our cars.. other then JZhang who isn't sharing Lmao...

Hambone · 05-21-2012, 11:38 AM

I'd be down for a pair as well. Always felt like the sideskirts were a little too high once you put some form of lip/splitter up front. Plus, the black accent would be nice

ilikebmxbikes · 05-21-2012, 12:14 PM

Quote:

Originally Posted by cooler2442

SLeK is currently in the design phase of manufacturing something exactly like this for our cars. I will be dropping my car off soon for measurements to get this made.

Awesome. I have been waiting for a good set of these to come out for a long time. Just crossing my fingers they would fit with an ER front end with minor modding. thanks for lending your car to get this going.

cooler2442 · 05-21-2012, 12:25 PM

Quote:

Originally Posted by Sylon

You mean just that strip of CF under the skirt? Well, that means they could run on the performance skirts too, wouldn't you think?

Quote:

Originally Posted by ilikebmxbikes

Awesome. I have been waiting for a good set of these to come out for a long time. Just crossing my fingers they would fit with an ER front end with minor modding. thanks for lending your car to get this going.

They won't just be a straight strip I believe. It will have a small kind of step design. SLeK will make it look nice. Technically they should fit the performance sideskirts because it will bolt up under the car but I don't have the performance sideskirts. I'm hoping we may find someone local with them to just quickly check. Unless someone wants to send me some performance sideskirts to test fit it on lol.

Sylon · 05-21-2012, 01:14 PM

Quote:

Originally Posted by cooler2442

They won't just be a straight strip I believe. It will have a small kind of step design. SLeK will make it look nice. Technically they should fit the performance sideskirts because it will bolt up under the car but I don't have the performance sideskirts. I'm hoping we may find someone local with them to just quickly check. Unless someone wants to send me some performance sideskirts to test fit it on lol.

If they are just the CF part under the skirt that SLeK is working on, then it should work with the Performance sides as well. The length of the Perf. sides are the same as the regular and they are the same straight shape. I'll continue on my plans as of now, hoping to accent them with these ones you speak of.

They will go with my CF front lip and diffuser really nicely.

1FAST1 · 05-21-2012, 02:12 PM

Looks like it may be a Slek summer. I'm looking to pick up the hood when that gets finished with the vent options as well as the trunk. I have been looking for a sides option and now this will tie right in. Definitely looking forward to this. Glad they decided to give it a shot. I have their front lip and the work is legit. Definitely waiting and looking forward to this.

AnooooOH · 05-21-2012, 02:25 PM

can`t wait!!

hopefully they`ll fit the bmwp sides!!

Eddie135 · 05-21-2012, 08:14 PM

Hopefully SLeK will make the price fairly competitive for the side lip.

As we missed out on the great front spoiler lip made by them last time. As delivery to Australia was so expensive.

cooler2442 · 05-21-2012, 09:01 PM

Quote:

Originally Posted by Eddie135

Hopefully SLeK will make the price fairly competitive for the side lip.

As we missed out on the great front spoiler lip made by them last time. As delivery to Australia was so expensive.

Nothing can be done for the Australian's unfortunately. Shipping is just that expensive on a huge box. Unless someone is willing to become SLeK's Australian distributor and do a bulk order for you guys.

135GCL · 05-22-2012, 12:56 AM

Quote:

Originally Posted by AnooooOH

here are some more:

This is my friends car, the sides are custom made, I am going to the same place to get mine done for my one which will be similar is design which is about $950, I talked to the vendor (

tth dinmann dot com) and he told me that if i can get at least 5 guys (not including me) to group buy he will get us a discount, its about 3 to 4 weeks for start to finish, free install for those in SoCal. PM me if you are interested.

MteK · 05-22-2012, 09:09 AM

If it could bow out a little as it goes down the line it would look better (like it does on the m3). Maybe at about 2/3 the way back?

The side skirt of the F30 looks too plain.

AnooooOH · 05-22-2012, 12:08 PM

I like the sides of the f30 most since they`d work best with my kerscher cf lip.

05-20-2012, 10:00 AM	#1
AnooooOH Captain Drives: 135i Join Date: May 2009 Location: Germoney Posts: 742 iTrader: (0)	Carbon sideskirts for non-m`s?? Is there something like this for the non-m?? I`D love to have them under my performance sides... __________________ ((( 135i PERFORMONSTER ))) AC-Schnitzer, aFe Stage 2, Bilstein B16 http://www.1erforum.de/umbauten/135i...ter-96031.html
	Tweet

05-20-2012, 10:32 AM	#2
AnooooOH Captain Drives: 135i Join Date: May 2009 Location: Germoney Posts: 742 iTrader: (0)	here are some more: __________________ ((( 135i PERFORMONSTER ))) AC-Schnitzer, aFe Stage 2, Bilstein B16 http://www.1erforum.de/umbauten/135i...ter-96031.html

05-20-2012, 11:14 AM	#3
Satalite Colonel Drives: 128i Join Date: Dec 2010 Location: Georgia Posts: 2,824 iTrader: (9) Garage List 2009 128i [5.00]	Not that I know of.. __________________

05-20-2012, 09:17 PM	#4
Sylon Brigadier General Drives: 2011 135i, SG/CR, 6MT, M-Sport Join Date: Apr 2010 Location: Michigan / Ohio Posts: 3,156 iTrader: (0) Garage List 2011 135i [4.60]	I would love to get a set like that if someone sold them. __________________ 2011 BMW 135i \| Space Gray \| ///M-Sport \| BMW CCA #450291 Facebook / Instagram / YouTube / Twitter

05-20-2012, 09:53 PM	#5
Eddie135 N55 Commando Drives: 135i - DCT - N55 Join Date: Jul 2011 Location: Melbourne Posts: 626 iTrader: (0)	+1, awesome. __________________ PPK-Stage 2 \| BMW 313 Wheels \| BMW CF Spoiler \| BMW CF Mirror Caps \| BMW Y-Pipe \| BMW CF Diffuser \| Black LCI Tailights \| K&N Drop-In \| iCarbon CF Front Lip \| LUX V3 \| PIVOT-Raizin Voltage Stabilizer \|

05-21-2012, 11:04 AM	#11
1LazyBmw Brigadier General Drives: E82 Join Date: Jun 2008 Location: Toronto Posts: 3,992 iTrader: (5)	Can't wait.. I know LTBMW makes custom ones but none for our cars.. other then JZhang who isn't sharing Lmao... __________________ Cardomain: http://www.cardomain.com/ride/3334104

05-21-2012, 11:38 AM	#12
Hambone Private Drives: 2009 TiAg 135i Join Date: Apr 2012 Location: Rochester, NY Posts: 51 iTrader: (0)	I'd be down for a pair as well. Always felt like the sideskirts were a little too high once you put some form of lip/splitter up front. Plus, the black accent would be nice __________________ 2009 TiAg 135i 6MT - Custom AST 5100 coilovers with Swift springs, Cobb Tuning, DCI, ER FMIC/CP, Tial BOV, AR Design Catted Downpipes, Berk Full Street Exhaust, BMW OEM Performance Rear Spoiler, BMW Black Kidney Grilles

05-21-2012, 02:12 PM	#16
1FAST1 Private Drives: 135i Join Date: Jul 2011 Location: Metairie, LA Posts: 79 iTrader: (0)	Looks like it may be a Slek summer. I'm looking to pick up the hood when that gets finished with the vent options as well as the trunk. I have been looking for a sides option and now this will tie right in. Definitely looking forward to this. Glad they decided to give it a shot. I have their front lip and the work is legit. Definitely waiting and looking forward to this. __________________

05-21-2012, 02:25 PM	#17
AnooooOH Captain Drives: 135i Join Date: May 2009 Location: Germoney Posts: 742 iTrader: (0)	can`t wait!! hopefully they`ll fit the bmwp sides!! __________________ ((( 135i PERFORMONSTER ))) AC-Schnitzer, aFe Stage 2, Bilstein B16 http://www.1erforum.de/umbauten/135i...ter-96031.html

05-21-2012, 08:14 PM	#18
Eddie135 N55 Commando Drives: 135i - DCT - N55 Join Date: Jul 2011 Location: Melbourne Posts: 626 iTrader: (0)	Hopefully SLeK will make the price fairly competitive for the side lip. As we missed out on the great front spoiler lip made by them last time. As delivery to Australia was so expensive. __________________ PPK-Stage 2 \| BMW 313 Wheels \| BMW CF Spoiler \| BMW CF Mirror Caps \| BMW Y-Pipe \| BMW CF Diffuser \| Black LCI Tailights \| K&N Drop-In \| iCarbon CF Front Lip \| LUX V3 \| PIVOT-Raizin Voltage Stabilizer \|

05-22-2012, 09:09 AM	#21
MteK Brigadier General Drives: // 135i //, X5 Join Date: Mar 2007 Location: Bay Area Posts: 3,215 iTrader: (41)	If it could bow out a little as it goes down the line it would look better (like it does on the m3). Maybe at about 2/3 the way back? The side skirt of the F30 looks too plain. __________________ M3 Links & sways F+R, M3 Brace, Wavetrac, AST, Swift Springs, Dinan plates, Prothane bushings, Meyle HD

05-22-2012, 12:08 PM	#22
AnooooOH Captain Drives: 135i Join Date: May 2009 Location: Germoney Posts: 742 iTrader: (0)	I like the sides of the f30 most since they`d work best with my kerscher cf lip. __________________ ((( 135i PERFORMONSTER ))) AC-Schnitzer, aFe Stage 2, Bilstein B16 http://www.1erforum.de/umbauten/135i...ter-96031.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search