FORUMS
- 5
![]() |
|
|
![]() |
| 06-22-2012, 08:20 AM | #1 |
|
New Member
|
Launch control?? HELP!!
I finally got 1200 miles on my 2012 135i and I can't activate launch control! I did exactly as the owners manuals says. Do I need to take it to the dealer so maybe a flash is needed? I know the M's require a flash after break in period. Any help will be appreciated.
|
|
|
|
| 06-22-2012, 11:22 AM | #2 |
|
Private First Class
![]() |
in the 2011 135 msport what you do is as follows
wait for the engine to get heated, best to be at the 120c temp point for safety u turn off completely the dsc [5 sec press on the button] press the sport mode shit the transmission to manual mode hit down gear [to get it to M mode and not S mode] i didnt try in S mode. GUN IT!
__________________
135i N55 / custom charge pipe / M3\M1 Bushings / CP-E 5" DP / JB4 S2 / K&N inbox
![]() |
|
|
|
| 06-22-2012, 02:48 PM | #3 |
|
New Member
|
I tried that..I tried every possible combination! I was out in my car last night for over an hour trying. I called several dealers and of course the techs didn't even know it had launch control.
|
|
|
|
| 06-22-2012, 03:21 PM | #4 |
|
Colonel
![]() |
I don't think a complete cancellation of DCT is required. Just one press to get the warning light to come on. Press the sport button and put the transmission in M1 and your foot on the brake.
Make sure the car has been driven 6 miles and is warmed up to 230-240F.
__________________
See my photography at http://ronscubadiver.wordpress.com
|
![]() |
|
| 06-23-2012, 01:22 AM | #6 |
|
Private First Class
![]() |
Don't press the DTC for 5 seconds, that will disconnect it completely.
What you need is: 1. Drive with your car for at least 10 miles till the engine is fully warmed up. This is important as the LC won't start otherwise 2. Press DTC once (not 5s) 3. Put gearbox in DS, shift down to go in manual mode. The gear displayed should be "M1" 4. Keep the brake pedal pushed, and floor the throttle until the end. Note there is a little click at the very end when you push the throttle to the metal. This click will activate LC. Anything below that will not. 5. The Launch Control icon with a flag should be displayed in your dash and the RPM should go up to 3500. As soon as you release the brake, BOOM, you will go ![]() |
|
|
|
| 06-23-2012, 03:58 AM | #7 |
|
Private First Class
![]() |
Hey Alex and Diver,
i usually d/c the DTC completely, dont know why i got used to it, but it works
__________________
135i N55 / custom charge pipe / M3\M1 Bushings / CP-E 5" DP / JB4 S2 / K&N inbox
![]() |
|
|
|
| 06-23-2012, 10:51 AM | #8 | |
|
Lieutenant
![]() ![]() ![]() |
Quote:
__________________
2011 AW 135i - DCT - M Package - BMW Performance Suspension Kit - Berk Street Midpipes - Evolution Racewerks FMIC - JB4 - BMS Intake - BMS Downpipes
|
|
|
|
|
| 06-23-2012, 11:07 AM | #9 |
|
Private First Class
![]() |
Aries then what is it?
it revs up to 4200 and once it hits 4200 it just launches. i will take a video soon
__________________
135i N55 / custom charge pipe / M3\M1 Bushings / CP-E 5" DP / JB4 S2 / K&N inbox
![]() |
|
|
|
| 06-24-2012, 10:06 PM | #12 |
|
Colonel
![]() |
I tried it the other night and got the checkered flag. The trick is to nail the throttle peddle to the floorboards really fast. If you press lightly, it will appear to be running against the clutch. BTW my car has PPK, for anyone who thinks there is no launch control with PPK.
__________________
See my photography at http://ronscubadiver.wordpress.com
|
![]() |
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|