Upgraded Audio System in my 135i

Winecountry88 · 07-20-2012, 12:24 AM

Finally splurged on an upgrade to my hi-fi system in my 2009 135i.

Went with a custom built enclosure for the trunk with matching carpeting. 12" JL sub, JL amp, with Hertz speakers up front. I'm a musician so I know music and sound, but the technical stuff of these systems is beyond me... don't really know if I got ripped off or not. Attached is the bill with part numbers/prices, and a pic of the sub enclosure. Let me know your thoughts. Keep in mind there is window tinting in this bill too, and the bulk was the labor to build the fiberglass enclosure. Love the sound up front so far, but the sub may need a little tweaking or something, it's not as tight and punchy as I'd like. Don't really know how all that works...

phrenetiK · 07-20-2012, 09:35 AM

what the fuck took 16.5 hours of installation?

that custom box is like 300-400 from a forum member here.

the install is about a 2-3hour install. you got super super super fucking ripped off for 2 speakers and a 12" sub.

you should have spent 600~ on a proper 10" sub/amp/enclosure setup if you wanted it to punch clean and have higher sound quality. you should have come out of the whole thing for under 1500 even with spending 800 bucks on front speakers

i just want to add if nothing else, you paid over 100 dollars for rca cables. wow.

Steve1155 · 07-20-2012, 02:44 PM

WOW! For less than that you could have got a complete stage2 Musicar setup with sub.

CentralPA E82 · 07-20-2012, 03:24 PM

They squeezed 6.5s in the front and back? Curious to the see the install as the mids are 4" stock.

BMW_Boy7 · 08-10-2012, 10:47 AM

They fucked u over, do u kno how much mechanical work could be done in 16 hours, so certainly not for that audio equipment. Always have someone with you that's informative of these things if ur not sure..

Adam135 · 08-10-2012, 02:18 PM

They used nice equipment. The prices are high though.. I paid $379 for the same amp from my audio shop.

bdoooh · 08-10-2012, 02:51 PM

OH....MY....GOD.... You could have gotten an LSD installed... and then some!

nato-main-man-5am · 08-17-2012, 06:02 PM

I feel sorry for the OP. Clearly had he come here first, the community would have steered him to a solution with a higher cost/benefit ratio. But wow, we are a direct-talking bunch!!

MrBimmer · 03-20-2013, 10:45 PM

About your tight and punchy bass issue.

If you wanted tight and punchy you should have went with a 10w3-2 instead of a 12w3-4

Your XD 700/5 is only giving 180 watts to your 12w3-4 that can handle 500 Watts.
it would give feed your sub 300 watts if you had a 2 OHM speaker. If you look at the specs for the amp it tells you how many watts it would supply to 2ohm, 3ohm, and 4ohm subs.

A 10w3 would have tighter base response because the woofer isn't moving as much air and can stabilize faster in between hits. And a 2 Ohm version ( 10w3-2 ) would get more power from your amp so you will get more punch.

Im no expert and i dont even have my own system yet. I want one badly though. ive been doing my research and planning and scheming to figure out what im going to end up with which is how i am able to answer your question. Oh and i happen to be a pianist

Cheers

jsmonet · 03-21-2013, 01:37 AM

where did they put the bass control knob? I'm always curious about this because I can't find a place that makes a lot of sense

07-20-2012, 12:24 AM	#1
Winecountry88 Registered Drives: 135i Join Date: Jul 2012 Location: San Francisco Posts: 4 iTrader: (0)	Upgraded Audio System in my 135i Finally splurged on an upgrade to my hi-fi system in my 2009 135i. Went with a custom built enclosure for the trunk with matching carpeting. 12" JL sub, JL amp, with Hertz speakers up front. I'm a musician so I know music and sound, but the technical stuff of these systems is beyond me... don't really know if I got ripped off or not. Attached is the bill with part numbers/prices, and a pic of the sub enclosure. Let me know your thoughts. Keep in mind there is window tinting in this bill too, and the bulk was the labor to build the fiberglass enclosure. Love the sound up front so far, but the sub may need a little tweaking or something, it's not as tight and punchy as I'd like. Don't really know how all that works... Attached Images
	0 Tweet

08-10-2012, 02:18 PM	#6
Adam135 Captain Drives: 2009 135i Join Date: Oct 2011 Location: USA Posts: 828 iTrader: (2)	They used nice equipment. The prices are high though.. I paid $379 for the same amp from my audio shop. Last edited by Adam135; 08-10-2012 at 02:30 PM.
	0

08-10-2012, 02:51 PM	#7
bdoooh Lieutenant Drives: '12 BMW 135i Join Date: Feb 2011 Location: Ohio Posts: 438 iTrader: (1)	OH....MY....GOD.... You could have gotten an LSD installed... and then some! __________________ 2012 Jet Black 135i M-Sport Mods: Cobb AP, VRSF DP, E92 M3 FSB, CDV mod, BMS clutch stop.
	0

08-17-2012, 06:02 PM	#8
nato-main-man-5am special Drives: 128i Join Date: Aug 2011 Location: California Posts: 790 iTrader: (8)	I feel sorry for the OP. Clearly had he come here first, the community would have steered him to a solution with a higher cost/benefit ratio. But wow, we are a direct-talking bunch!! __________________ Euro spec wide angle mirrors; sport wheel + flappy paddles; staggered sport rims with Conti ExtremeContact DW. JL Audio 600/6 + technic harness; Gladen Audio 8" Woofers + musicarnw adapters; Morel Hybrid Ovations. For sale: Msport factory suspension: front & rear sways, springs, & rear struts (fronts sold); M3 flappy paddles; OEM 264 staggered sport rims -- the most aggressive OEM rims for the 1 series.
	0

03-20-2013, 10:45 PM	#9
MrBimmer Rated M Drives: 1M Join Date: Aug 2008 Location: Queens, New York Posts: 189 iTrader: (3)	About your tight and punchy bass issue. If you wanted tight and punchy you should have went with a 10w3-2 instead of a 12w3-4 Your XD 700/5 is only giving 180 watts to your 12w3-4 that can handle 500 Watts. it would give feed your sub 300 watts if you had a 2 OHM speaker. If you look at the specs for the amp it tells you how many watts it would supply to 2ohm, 3ohm, and 4ohm subs. A 10w3 would have tighter base response because the woofer isn't moving as much air and can stabilize faster in between hits. And a 2 Ohm version ( 10w3-2 ) would get more power from your amp so you will get more punch. Im no expert and i dont even have my own system yet. I want one badly though. ive been doing my research and planning and scheming to figure out what im going to end up with which is how i am able to answer your question. Oh and i happen to be a pianist Cheers __________________
	0

07-20-2012, 09:35 AM	#2
phrenetiK Banned Drives: 08 135i Join Date: Mar 2012 Location: Houston, TX Posts: 357 iTrader: (4)	what the fuck took 16.5 hours of installation? that custom box is like 300-400 from a forum member here. the install is about a 2-3hour install. you got super super super fucking ripped off for 2 speakers and a 12" sub. you should have spent 600~ on a proper 10" sub/amp/enclosure setup if you wanted it to punch clean and have higher sound quality. you should have come out of the whole thing for under 1500 even with spending 800 bucks on front speakers i just want to add if nothing else, you paid over 100 dollars for rca cables. wow.
	0

07-20-2012, 02:44 PM	#3
Steve1155 Second Lieutenant Drives: Mine Join Date: Jan 2011 Location: San Antonio, TX Posts: 212 iTrader: (0)	WOW! For less than that you could have got a complete stage2 Musicar setup with sub.
	0

07-20-2012, 03:24 PM	#4
CentralPA E82 Rookie Drives: 2009 128i Join Date: Apr 2010 Location: New Cumberland, PA Posts: 264 iTrader: (1)	They squeezed 6.5s in the front and back? Curious to the see the install as the mids are 4" stock.
	0

08-10-2012, 10:47 AM	#5
BMW_Boy7 Private First Class Drives: 2010 M3 Join Date: Sep 2011 Location: W.Bloomfield Posts: 173 iTrader: (0)	They fucked u over, do u kno how much mechanical work could be done in 16 hours, so certainly not for that audio equipment. Always have someone with you that's informative of these things if ur not sure..
	0

03-21-2013, 01:37 AM	#10
jsmonet Lieutenant Drives: 2012 135 Join Date: Nov 2011 Location: so cal Posts: 425 iTrader: (2)	where did they put the bass control knob? I'm always curious about this because I can't find a place that makes a lot of sense __________________ 2012 135i. dinan stg3 \| ohlins dfv \| assorted rice \| hardest parker evAr
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search