FORUMS
- 5
 |
 |
 |
 |
| 08-02-2012, 11:15 AM | #1 |
|
Spoolin' and Droolin'
|
Induktion Motorsports
Has any one been here to get work done? Only place I have stuck to when I had the Honda was Innovative Motorworks in Carlisle, PA but they specialize in Honda/Acuras; still would work on my BMW though but looking for another shop for the BMW possibly if they have worked on a N54/N55 before.
http://www.4induktion.com/index.htm
__________________
Old| 2005 s2000: KPRO, Invidia q300 v4, PLM header, BERK 70mm HFC, Vortech v2 (3.6" Reichard Pulley), FMIC, ID 725cc (397whp/243tq @9psi, Tuned at Innovative Motorworks.
New| 2008 135i: COBB Stage 2+, ER CP, TiAL Q, BMS OCC, BMS DCI, Active Autowerke 2.0 Sport FMIC, VRSF 3" DPs, CP-E Axleback, Robs' PCV. Coming Soon: AMS FMIC, welded 3" cold piping; Protuning Freaks Protune |
 |
|
| 08-02-2012, 11:50 AM | #2 |
|
Private First Class
 
|
Funny you should mention it, it was just brought up in this thread, a couple below yours...
http://www.1addicts.com/forums/showthread.php?t=725844
__________________
 |
|
|
| 08-02-2012, 05:14 PM | #3 |
|
Supreme Member
Drives: crazy Join Date: Sep 2011
Location: Reston, VA
|
I used them for a full coilover setup, some other suspension bits and some light engine modification. Was completely satisfied with the work, very professional and seem to run a good shop.
|
|
|
|
| 08-02-2012, 08:25 PM | #4 |
|
Spoolin' and Droolin'
|
alright thanks for the reply. I'm trying to get them to do some fab work on the hot and cold side piping of my intercooler. Might use them. 55 miles from my hosue
__________________
Old| 2005 s2000: KPRO, Invidia q300 v4, PLM header, BERK 70mm HFC, Vortech v2 (3.6" Reichard Pulley), FMIC, ID 725cc (397whp/243tq @9psi, Tuned at Innovative Motorworks.
New| 2008 135i: COBB Stage 2+, ER CP, TiAL Q, BMS OCC, BMS DCI, Active Autowerke 2.0 Sport FMIC, VRSF 3" DPs, CP-E Axleback, Robs' PCV. Coming Soon: AMS FMIC, welded 3" cold piping; Protuning Freaks Protune |
|
|
|
 |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|
