|07-22-2014, 12:10 PM||#1|
UUC E8X/E9X SwayBars @ www.n54tuning.com starting @ 220.00
Suitable for 335, 330, 328, 325 models (all i/Ci/CiT body configurations)
Suitable for 335Xi, 330Xi, 328Xi, 325Xi models (Select XI Drivetrain from Drop down Menu)
Suitable for all E82/E87 models including Euro-market: 135i, 130i, 128i, 120i, 120d, 118i, 118d
Now you can have the same swaybar technology used in the official BMW 335d racecars! UUC is proud to have been the manufacturer of swaybars for the 335d racecars campaigned by BMW USA.
What's a Sway Bar?
An anti-sway bar is a suspension component designed to reduce body roll. It keeps your vehicle flatter in the turns by transferring the pressure exerted on the outboard wheels and applying opposite pressure on the inboard wheels. In this way weight is more evenly applied to all four wheels, helping the vehicle stay more level with the road.
As an example of our attention to detail, the E90 3-series Sway Barbarians is a very unique set of bars. Features include:
- Revised contouring for maximum clearance even with extremely lowered cars.
- Precision-cut adjustable ends.
- Positive-stop rear bushing guides assure bar stays in place.
- Urethane bushings and lubrication included.
We put our bars through this extensive process to insure that the final product will be the strongest, most durable bar on the market, and that it will be the most resistant to form alteration.
The SwayBarbarian uses a multi-hole system on the rear bars which allows for fine tuning of the bar for whatever desired effect, without sacrificing body roll.
Front Bar: non-adjustable
Rear Bar: 2 hole adjustment
Positive-placement rear bushing stops
To keep the tight-tolerance rear bar from shifting side-to-side, they are fitted with postiive-placement stops, rings around the bar that hold the bar in place against the bushings.
After the bars are CNC mandrel bent and the ends are forged and punched, a silver powdercoat is applied for a smooth, long lasting finish in a similar process to how factory bars are coated. This smooth finish allows the bars, when properly installed with polyurethane bushings and grease, for long term performance with minimal maintenance.
The SwayBarbarians include replacement delrin-lined polyurethane bushings which are built to "aircraft spec" (literally - our urethane fabrication facility uses the same material and production guidelines as they do for Boeing). This results in a durable bushing that will not disintegrate and has longer re-lubrication intervals for long lasting, quiet results. Be sure to use generous amounts of grease to ensure maximum performance from your SwayBarbarians!
FOR non XI
27mm FRONT & 19mm REAR SET (INCLUDES BUSHINGS)
27mm FRONT ONLY (INCLUDES FRONT BUSHINGS)
19mm REAR ONLY (INCLUDES REAR BUSHINGS)
FOR XI Models
19.5mm REAR ONLY (INCLUDES REAR BUSHINGS)
25.5mm FRONT & 19.5mm REAR SET (INCLUDES BUSHINGS)
25.5mm FRONT ONLY (INCLUDES FRONT BUSHINGS)
|Thread Tools||Search this Thread|