BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      10-18-2012, 08:58 PM   #1
manikgtr
New Member
 
Drives: 2008 135i
Join Date: Apr 2012
Location: toronto

Posts: 11
iTrader: (0)

Exclamation Clutch issues please help shed some light

Hi guy and gals i've recently been having some issues with my car and was hoping there might be someone here that could help shed some light on what the problem might be. So let me start from the begging. About 3 weeks or so ago I install a new clutch in my car (clutch master stage 4 with ALU flywheel). I torqued all bolts to spec and replaced the ALU ones that they say not to reuse. So after everything was back together I when't for a test drive all seemed ok. after a few drives it started to chatter wile in gear and driving at very low rpm like under 1700. Also it chatters once the engine gets hot in neutral but once i press the clutch it goes away and starts immediately once released. the problem seems to be getting worse anybody ever had this happen by the way theres a new throw out bearing theres probably only 2000km on the clutch i really don't want to have to remove the tranny aging.
manikgtr is offline   Canada
0
Reply With Quote
      10-21-2012, 09:59 PM   #2
631twentyeighteye
Lieutenant Colonel
 
631twentyeighteye's Avatar
 
Drives: 2010 130i MT
Join Date: Aug 2012
Location: Long island

Posts: 1,696
iTrader: (6)

I'm no clutch expert, but after market clutches, especially ones that replace the fly wheel tend to be very noisy exactly how you described. but i'll let others chime in and provide more details.
631twentyeighteye is offline   United_States
0
Reply With Quote
      10-22-2012, 04:08 PM   #3
ErvGotti
Major
 
Drives: 2008 135i 6MT
Join Date: Jul 2010
Location: Bury St Edmunds UK

Posts: 1,165
iTrader: (5)

Garage List
2008 135i  [3.00]
Yeah it seems that any other Flywheel besides the stock dual mass will come with extra chatter. That's why BMW used the dual mass one of it's benefits is less chatter. I'd say if everything is installed correctly and you don't like the chatter, I'd keep the clutch and install a new OEM flywheel. You'll sacrifice some responsiveness, but will have significantly less chatter.
ErvGotti is offline  
0
Reply With Quote
      10-22-2012, 05:00 PM   #4
dan_brooks
Private
 
dan_brooks's Avatar
 
Drives: '09 135i Manual
Join Date: May 2012
Location: Brisbane

Posts: 75
iTrader: (0)

Flywheel chatter happens with a lightened solid mass flywheel...
Each engine pulse isn't dampened like the OEM flywheel (2 'discs' rotationally sprung), so the noise gets transmitted rather than absorbed.

As above, if you can't stand it (understandable) then you'll have to get an OEM flywheel.
dan_brooks is offline   Australia
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:42 AM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST