Sponsored by The Tire Rack

[evilstib]

Hello,

Are you a Forgestar dealer / retailer? Would you like to make some money?

If so, we should talk because I want to give you some!!!

Please PM me with your price for a set of silver F14s in Apex Arc-8 offsets.

Please note:
- I'm looking to run 235/40/18 & 275/30/18 Mich PSS tires.
- I've installed the M bits (control arms, sway bar, etc.) on the front end, so I should be ok with a 235 tire. If you don't think so, let me know as I'm not into fender rolling or rubbing

If anyone knows of a group buy, please let me know. If you're also interested in a set, we can start a group buy.

[guitarguylp]

If you find a great price let me know. I am in the market for wheels, and also in Alberta, lets see if we can get a group buy together!!! the CF5 looks almost as good as the Enkei RP03s that I am looking at buying.

[uberschnell]

Originally Posted by evilstib

Hello,

Are you a Forgestar dealer / retailer? Would you like to make some money?

If so, we should talk because I want to give you some!!!

Please PM me with your price for a set of silver F14s in Apex Arc-8 offsets.

Please note:
- I'm looking to run 235/40/18 & 275/30/18 Mich PSS tires.
- I've installed the M bits (control arms, sway bar, etc.) on the front end, so I should be ok with a 235 tire. If you don't think so, let me know as I'm not into fender rolling or rubbing

If anyone knows of a group buy, please let me know. If you're also interested in a set, we can start a group buy.

I was running 235/40/18's on a 8.5 F14 with a 45ET offset. M3 bits also. I had rub on the tabs which connect the fender to the bumper, even after grinding them down. BTW, I'm running on Coil overs and my front tires have no gap.

I ended up installing Dinan camber plates and the rub is gone, and I could probably go out another 3 mm in offset.

[chrisN]

take my money!

[evilstib]

Thx Mtek. I might have to get camber plates or go with 225 tires.

And YES!! Take our money.

No PMs as of yet