Recommend a shop to replace CDV? v.Bellevue

dvn · 08-03-2007, 11:25 PM

Any ideas?

Johnny Lin · 08-04-2007, 01:36 AM

Just want to say hi, caz I am from WA too. Come to our next meet and that will be tmw. Search on HIN GTG 8/4, you should find the informations for tmw's meet. We are going to the import car show tmw. The entry fees is about 25 dollars. By the way, what is a CDV. I know is a stupid question, sorz. Just try to help but dont know what is it. HA~

Blue330i2006 · 08-31-2007, 07:08 PM

DO IT YOURSELF. only need 2 tools one to take off the skid plate and the other to pinch the line so not to leak, oh yea, 3. and a small wrench to bleed the system again. Took me 15 min from start to finish and I didn't even need to add more brake fluid. Use the DIY post here it is great!!

spacedogg · 08-31-2007, 08:22 PM

If you're not mechanically inclined...almost any tranny shop should be able to do it. It's a fairly easy swap for a professional...

I personally did not attack it myself because I needed a second person to pump the clutch so I could the bleed the system...plus I have no experience dealing with clutches/brake lines.

Unfortunately, I got it done up here in Canada...so can't recommend a shop to you.

08-03-2007, 11:25 PM	#1
dvn Lieutenant 32 Rep 412 Posts Drives: 2012 C63 Coupe Join Date: May 2007 Location: Seattle, WA iTrader: (4)	Recommend a shop to replace CDV? v.Bellevue Any ideas?
	Appreciate 0 Tweet Quote

08-04-2007, 01:36 AM	#2
Johnny Lin Lieutenant General 832 Rep 11,307 Posts Drives: AW E92 M3 Join Date: Apr 2006 Location: Bellevue, WA iTrader: (42)	Just want to say hi, caz I am from WA too. Come to our next meet and that will be tmw. Search on HIN GTG 8/4, you should find the informations for tmw's meet. We are going to the import car show tmw. The entry fees is about 25 dollars. By the way, what is a CDV. I know is a stupid question, sorz. Just try to help but dont know what is it. HA~
	Appreciate 0 Quote

08-31-2007, 07:08 PM	#3
Blue330i2006 Enlisted Member 4 Rep 32 Posts Drives: Blue330i2006 Join Date: Jun 2005 Location: Everett, WA USA iTrader: (0)	DO IT YOURSELF. only need 2 tools one to take off the skid plate and the other to pinch the line so not to leak, oh yea, 3. and a small wrench to bleed the system again. Took me 15 min from start to finish and I didn't even need to add more brake fluid. Use the DIY post here it is great!!
	Appreciate 0 Quote

08-31-2007, 08:22 PM	#4
spacedogg Colonel 194 Rep 2,816 Posts Drives: Debadged Join Date: Aug 2006 Location: Vancouver, BC iTrader: (0)	If you're not mechanically inclined...almost any tranny shop should be able to do it. It's a fairly easy swap for a professional... I personally did not attack it myself because I needed a second person to pump the clutch so I could the bleed the system...plus I have no experience dealing with clutches/brake lines. Unfortunately, I got it done up here in Canada...so can't recommend a shop to you.
	Appreciate 0 Quote