New - AluFelgen CSL 1-Series exclusive offsets! - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

ALUFELGEN · 10-20-2009, 09:11 AM

We are pleased to bring you the first CSL wheels exclusively for the 1-Series, the AluFelgen CS7. This is not our official introduction but we couldn't wait to show you how they look. They are 18x8.0ET48 and 18x9.0ET48 and the best advantage over our competitors they are manufactured using Low-Pressure Casting. Enjoy!

I present to you the world's first exclusive 1-series offset CSL wheels!

Front shots:

Profile:

Concavity. This is our engineering skills at its best. It was nearly impossible to obtain that level of concavity out of a 9.0ET48 wheel. It took us about 2 weeks to design a wheel with that fitment, that depth and certifiable but we did it for you. Enjoy it. It is our greatest pride. Look at that concavity!

Hub: Notice the CS7 stamp.

Please direct all Sales inquiries here: http://www.1addicts.com/forums/showthread.php?t=224109

GPIC135I · 10-20-2009, 10:08 AM

Love the wheels! can't wait for mine! Any shots of the Hyperblack finish!

adrean8j · 10-20-2009, 10:49 AM

When do you expect to have them available? (and by that I mean with NO wait).

Probable weight?

ALUFELGEN · 10-20-2009, 11:04 AM

Quote:

Originally Posted by GPIC135I

Love the wheels! can't wait for mine! Any shots of the Hyperblack finish!

Will post as soon as we get them.

Quote:

Originally Posted by adrean8j

When do you expect to have them available? (and by that I mean with NO wait).

Probable weight?

They should be here November. Production is expected to be completed by Friday. Weight is expected to be at 21-22lbs.

marvinp · 10-20-2009, 11:40 AM

So where can we order these?

ALUFELGEN · 10-20-2009, 11:45 AM

Quote:

Originally Posted by marvinp

So where can we order these?

PM'ed.

RobMason · 10-20-2009, 11:51 AM

!

ALUFELGEN · 10-20-2009, 12:18 PM

Quote:

Originally Posted by RobMason

If I am not mistaken the design that was proposed was

Specs:
-18x8.0 offset +48 - 22.2 lbs
-18x9.0 offset +48 - 22.7 lbs

The offset on the front is changed, how about the weights?

There is a typo. Offset is ET48. Weights are not changed.

achtungE30 · 10-20-2009, 12:21 PM

Any plans on researching and possibly offering a 19" with similar concavity?

ALUFELGEN · 10-20-2009, 12:23 PM

Quote:

Originally Posted by achtungE30

Any plans on researching and possibly offering a 19" with similar concavity?

We`ll provide a 19" version next year. We believe 18" is the perfect size for the 1-series though.

achtungE30 · 10-20-2009, 12:37 PM

Quote:

Originally Posted by AluFelgen

We`ll provide a 19" version next year. We believe 18" is the perfect size for the 1-series though.

I'll disagree and hold out for your 19" offering

ALUFELGEN · 10-20-2009, 12:46 PM

Quote:

Originally Posted by achtungE30

I'll disagree and hold out for your 19" offering

That's why we are making them

BlackjackMulligan · 10-20-2009, 12:50 PM

gonna be cool seeing these wheels with the correct offset!

Feyd · 10-20-2009, 01:04 PM

Quote:

Originally Posted by BlackjackMulligan

gonna be cool seeing these wheels with the correct offset!

+1

any other finishes besides silver/hypersilver going to be made available?

Muffnbluff · 10-20-2009, 09:37 PM

Quote:

Originally Posted by AluFelgen

We`ll provide a 19" version next year. We believe 18" is the perfect size for the 1-series though.

Agreed...anything over 18" on a 1er is just stupid. WHy would you want heavier wheels with a rubberband for a tire?

adrean8j · 10-20-2009, 09:45 PM

Quote:

Originally Posted by Muffnbluff

Agreed...anything over 18" on a 1er is just stupid. WHy would you want heavier wheels with a rubberband for a tire?

Are you saying that you cannot get lighter wheels or wheels close to stock weights in 19"???
You would sacrifice a bit in weight as well if you are going for a certain "look"....its not stupid, its just different strokes for different folks

BMW86 · 10-20-2009, 09:47 PM

Where can I get me a set of these?

When do you expect to see them shipped out?

ALUFELGEN · 10-20-2009, 09:51 PM

Quote:

Originally Posted by BMW86

Where can I get me a set of these?

When do you expect to see them shipped out?

We have almost the entire production pre-sold. They`ll be available to ship next month. I`m saying you a PM for ordering.

BMW86 · 10-20-2009, 09:53 PM

Quote:

Originally Posted by AluFelgen

We have almost the entire production pre-sold. They`ll be available to ship next month. I`m saying you a PM for ordering.

So no more wheels, you said almost sold out. And I didn't get that last past, are you sending me a PM?

ALUFELGEN · 10-20-2009, 10:00 PM

Quote:

Originally Posted by BMW86

So no more wheels, you said almost sold out. And I didn't get that last past, are you sending me a PM?

We have the majority of the production pre-sold due to a GB so please reply our PM to make sure you are not left out.

BMW86 · 10-20-2009, 10:01 PM

Quote:

Originally Posted by AluFelgen

We have the majority of the production pre-sold due to a GB so please reply our PM to make sure you are not left out.

Thanks PM received

Esmallstii · 10-21-2009, 10:59 AM

YESSS!!!

Finally a decent looking CSL Rep w/ proper offsets!
I will most likely wait till spring so I can see a few mounted up and,..The car will be going nite nite for a winters nap soon.
What is the cost on a set of these?

10-20-2009, 09:11 AM	#1
ALUFELGEN Drives: E92 M3 Join Date: Nov 2008 Location: South Florida Posts: 2,056 iTrader: (5)	New - AluFelgen CSL 1-Series exclusive offsets! We are pleased to bring you the first CSL wheels exclusively for the 1-Series, the AluFelgen CS7. This is not our official introduction but we couldn't wait to show you how they look. They are 18x8.0ET48 and 18x9.0ET48 and the best advantage over our competitors they are manufactured using Low-Pressure Casting. Enjoy! I present to you the world's first exclusive 1-series offset CSL wheels! Front shots: Profile: Concavity. This is our engineering skills at its best. It was nearly impossible to obtain that level of concavity out of a 9.0ET48 wheel. It took us about 2 weeks to design a wheel with that fitment, that depth and certifiable but we did it for you. Enjoy it. It is our greatest pride. Look at that concavity! Hub: Notice the CS7 stamp. Please direct all Sales inquiries here: http://www.1addicts.com/forums/showthread.php?t=224109 Last edited by ALUFELGEN; 11-04-2009 at 08:03 PM.
	Tweet

10-20-2009, 10:08 AM	#2
GPIC135I Private Drives: Join Date: Apr 2008 Posts: 67 iTrader: (2)	Hyperblack Love the wheels! can't wait for mine! Any shots of the Hyperblack finish!

10-20-2009, 11:40 AM	#5
marvinp First Lieutenant Drives: 2009 Montego Blue 135i Join Date: Jun 2009 Location: San Francisco, CA Posts: 358 iTrader: (0)	So where can we order these? __________________ Montego blue BMW 135i with black interior, Sports Package, BMW Assist, and Comfort Access. Ordered: 6/1/2009 \| Built: 6/11/2009 \| Shipped: 6/25/2009 \| PCD: 7/27/2009

10-20-2009, 11:51 AM	#7
RobMason M Power Drives: '09 ///M-Sport 135i Join Date: Nov 2007 Location: San Rafael Posts: 1,471 iTrader: (3)	! Last edited by RobMason; 04-21-2010 at 10:49 PM.

10-20-2009, 12:21 PM	#9
achtungE30 I can has my 135i! Drives: '08 135, '08 X3, '87 e30s52 Join Date: Apr 2006 Location: NJ Posts: 2,901 iTrader: (2) Garage List 2008 135is [4.75] 2010 Cooper S [5.00] 1991 318is [5.00]	Any plans on researching and possibly offering a 19" with similar concavity? __________________ - Frank My 2008 135i Euro Delivery Thread: http://www.1addicts.com/forums/showthread.php?t=219422 May 2011 Self-Photoshoot Part 1: http://www.1addicts.com/forums/showthread.php?t=529573 My E30 S52 Mtech 1 Vert build thread http://www.r3vlimited.com/board/showthread.php?t=229347

10-20-2009, 12:50 PM	#13
BlackjackMulligan Most interesting Roadster Drives: '01 Z3.0 Roady;'10 C300 Sport Join Date: Nov 2008 Location: Boston 'burbs Posts: 2,224 iTrader: (5) Garage List 2010 Mercedes-Benz ... [0.00] 2001 BMW Z3 3.0 Roa ... [0.00]	gonna be cool seeing these wheels with the correct offset! __________________ I can't complain, but sometimes I still do........Life's been good to me so far. - Joe Walsh

10-20-2009, 09:47 PM	#17
BMW86 Major General Drives: BMW 135i / Kawa Ninja Join Date: Jul 2008 Location: Australia Posts: 8,613 iTrader: (0)	Where can I get me a set of these? When do you expect to see them shipped out? __________________ BMW 135i N54 TWIN TURBO Quarter Mile 12.173@113.70mph - Street Tyres Queensland Raceway Sprint 1:01:22 - Street Tyres Queensland Raceway Clubman 1:04:74 - Street Tyres Lakeside Raceway 1:03:97 - Street Tyres

10-21-2009, 10:59 AM	#22
Esmallstii Systematic Chaos Drives: 08 135i Join Date: Nov 2007 Location: Waterford, NY Posts: 550 iTrader: (1)	YESSS!!! Finally a decent looking CSL Rep w/ proper offsets! I will most likely wait till spring so I can see a few mounted up and,..The car will be going nite nite for a winters nap soon. What is the cost on a set of these? __________________ BSM/Coral red/Sp pkg/Cft access/Htd seats/BMW Performance Pedals, Spoiler, & Rotors/18" VMR V710's/Hankook Ventus/Cool Carbon Pads ."The 135i's engine sound is so ferocious and bittersweet, so carnal and wicked, somebody ought to name a heavy-metal band after it: Velvet Chain Saw."

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search