Procede 2.5 N54 possible to log LPFP pressure?

[marconi118]

Is it possible to log the LPFP and the HPFP pressure with procede 2.5?

My trims are at 34% and leaning out on simple map3 aggressive, I have to diagnose if LPFP HPFP or injectors are on the way out....

[ragingpanda]

Are you running any amount of E85?

[marconi118]

no straight premium 95 oct gas, I am FBO

[ragingpanda]

You need to get into contact with Vishnu, good luck with that.

[Dmacc]

Originally Posted by marconi118

Is it possible to log the LPFP and the HPFP pressure with procede 2.5?

My trims are at 34% and leaning out on simple map3 aggressive, I have to diagnose if LPFP HPFP or injectors are on the way out....

Try switching to the autotune maps instead of the aggressive maps and see if your issue persists. Try contacting Vishnu as well. When the aggressive maps were first released, I was hitting my trim limit with OL at 100.

If you're looking to run more power than you are trying to right now, and want to start mixing in some e85, I'd recommend going with the 100 dollar procede flash. Solved my trim issues on the aggressive maps, and gave me the flexibility to run high amounts of e85 if I chose to.

I hope you get your issue solved one way or another

[marconi118]

I am FBO and want the power of stage3 aggressive...

No way to send the DME for flash to the states, I live in europe.

Robert@Vishnu is advising to replace injectors, but I would check LPFP pressure before...