>>HP Autowerks<< aFe Stage 2 Intake - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

HP Autowerks · 01-05-2012, 12:46 AM

This Stage 2 cold air intake system out-flowed the factory intake by 98%. Includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Pro 5 R Filter (Blue)

This filter outflows the factory intake by 33%, increases performance and MPG. Constructed with 100% polyurethane on all four sides, this high flow, oiled OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly space pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Pro Dry S (Gray)

This filter outflows the factory intake by 33%, increases performance and MPG. Constructed with 100% polyurethane on all four sides, this high flow "oil-free" OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Two layers of progressively finer mesh synthetic media provide maximum convenience and easy maintenance. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Price: $359.00

Order Here: http://www.hpashop.com/aFe-Stage-2-D...one-e82-1m.htm

1'M Blue · 01-15-2012, 10:53 PM

For dry weather countries (middle east) which filter would you recomend ? any major differance between the (blue and grey)?

HP Autowerks · 01-17-2012, 04:35 PM

Quote:

Originally Posted by 1'M Blue

For dry weather countries (middle east) which filter would you recomend ? any major differance between the (blue and grey)?

There is no measurable performance difference between the two filters. Pro-Dry is much easier when it come to cleaning time.

dd7511 · 02-05-2012, 01:35 AM

I'd like to place an order of this & the chargepipe, do you mind giving me your email address because I need to get it shipped over here in Indonesia?

Thanks

HP Autowerks · 02-09-2012, 11:00 PM

Quote:

Originally Posted by dd7511

I'd like to place an order of this & the chargepipe, do you mind giving me your email address because I need to get it shipped over here in Indonesia?

Thanks

PM sent!

HP Autowerks · 02-22-2012, 04:30 PM

Dual cone intakes are in stock!

Keanu111 · 02-23-2012, 06:52 AM

Do you know the gains with this on by the way? Thanks

HP Autowerks · 03-20-2012, 05:37 PM

Quote:

Originally Posted by Keanu111

Do you know the gains with this on by the way? Thanks

That will depend on your other hardware and software mods. Typically you will see 7-10 whp on a stage 1 flash without other supporting hardware.

SANTI21 · 03-23-2012, 07:07 AM

Is N55 available ?

M3Power79 · 03-30-2012, 04:21 AM

Does this creates a typical intake sound?

HP Autowerks · 03-30-2012, 03:04 PM

Quote:

Originally Posted by M3Power79

Does this creates a typical intake sound?

Yes, it does. And the sound of the recirculation of air can also be heard.

HP Autowerks · 04-11-2012, 12:35 PM

Only 3-4 days lead time on these!

HP Autowerks · 06-20-2012, 11:50 PM

Please allow 3-5 days lead time for shipping after you place your order.

HP Autowerks · 07-01-2012, 11:03 PM

One of the best cold intakes you can get for your 1M.

HP Autowerks · 07-18-2012, 11:36 PM

There is a 3-4 days lead time to get this intake.

HP Autowerks · 08-17-2012, 08:49 PM

Bump!

HP Autowerks · 10-24-2012, 01:17 AM

Bump!

HP Autowerks · 12-03-2012, 11:47 AM

Just a couple of days away!

mrow · 12-03-2012, 06:16 PM

Do you carry the stage 2 Si? I like that version better since it's sealed.

EDIT: Nevermind, the Si version was 2 threads up. Doh.

HP Autowerks · 12-03-2012, 06:43 PM

Quote:

Originally Posted by mrow

Do you carry the stage 2 Si? I like that version better since it's sealed.

EDIT: Nevermind, the Si version was 2 threads up. Doh.

The sealed version is good in stock!

01-05-2012, 12:46 AM	#1
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,048 iTrader: (26)	>>HP Autowerks<< aFe Stage 2 Intake This Stage 2 cold air intake system out-flowed the factory intake by 98%. Includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. Pro 5 R Filter (Blue) This filter outflows the factory intake by 33%, increases performance and MPG. Constructed with 100% polyurethane on all four sides, this high flow, oiled OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly space pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter. Pro Dry S (Gray) This filter outflows the factory intake by 33%, increases performance and MPG. Constructed with 100% polyurethane on all four sides, this high flow "oil-free" OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Two layers of progressively finer mesh synthetic media provide maximum convenience and easy maintenance. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter. Price: $359.00 Order Here: http://www.hpashop.com/aFe-Stage-2-D...one-e82-1m.htm Attached Images Last edited by HP Autowerks; 02-05-2012 at 01:51 AM.
	Tweet

02-22-2012, 04:30 PM	#6
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,048 iTrader: (26)	E82 1M intake Dual cone intakes are in stock!

03-30-2012, 04:21 AM	#10
M3Power79 Lieutenant Drives: 1M Coupé BSM Join Date: Oct 2010 Location: Belgium Posts: 408 iTrader: (0)	Does this creates a typical intake sound? __________________ "... on the smiles-per-mile charts, the 1-series M coupe can't be beat. It is a challenging piece, a triple-X-rated driver's machine for semi-professionals. Its handling balance provides an open invitation to indulge in latent oversteer, and provides an opportunity to separate the men from the boys. It is an absolute hoot on the track and an addictive plaything on your favorite twisty back road. "

12-03-2012, 11:47 AM	#18
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,048 iTrader: (26)	AFE Dual Cone Intake Just a couple of days away!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-15-2012, 10:53 PM	#2
1'M Blue Lieutenant Drives: 1M Join Date: Nov 2011 Location: OM Posts: 453 iTrader: (0)	For dry weather countries (middle east) which filter would you recomend ? any major differance between the (blue and grey)?

02-05-2012, 01:35 AM	#4
dd7511 Enlisted Member Drives: BMW 1M VO Join Date: Mar 2011 Location: Indonesia Posts: 36 iTrader: (0)	I'd like to place an order of this & the chargepipe, do you mind giving me your email address because I need to get it shipped over here in Indonesia? Thanks

02-23-2012, 06:52 AM	#7
Keanu111 Private First Class Drives: 2011 VO 1M, 2012 AW M3 Join Date: Nov 2011 Location: Alberta Posts: 133 iTrader: (0)	Do you know the gains with this on by the way? Thanks

03-23-2012, 07:07 AM	#9
SANTI21 Enlisted Member Drives: 135i 2012 Join Date: Dec 2011 Location: Colombia Posts: 38 iTrader: (0)	Is N55 available ?

04-11-2012, 12:35 PM	#12
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,048 iTrader: (26)	Only 3-4 days lead time on these!

06-20-2012, 11:50 PM	#13
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,048 iTrader: (26)	Please allow 3-5 days lead time for shipping after you place your order.

07-01-2012, 11:03 PM	#14
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,048 iTrader: (26)	One of the best cold intakes you can get for your 1M.

07-18-2012, 11:36 PM	#15
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,048 iTrader: (26)	There is a 3-4 days lead time to get this intake.

08-17-2012, 08:49 PM	#16
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,048 iTrader: (26)	Bump!

10-24-2012, 01:17 AM	#17
HP Autowerks Lieutenant General Drives: 2011 135i DCT & 2011 1M Join Date: Mar 2007 Location: Santa Barbara, AST, Brembo, Eibach, H&R, GIAC, Koni, Quaife, Stoptech, Vorshlag, Posts: 10,048 iTrader: (26)	Bump!

12-03-2012, 06:16 PM	#19
mrow Second Lieutenant Drives: AW 1M Join Date: Aug 2010 Location: Delaware Posts: 251 iTrader: (0)	Do you carry the stage 2 Si? I like that version better since it's sealed. EDIT: Nevermind, the Si version was 2 threads up. Doh.