any rubs / issues on the following tire/wheel/spacer configuration ?? - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

capri · 12-10-2012, 08:36 PM

rims are stock Front 18 x 7.5--47 offset and Rears 18 x 8.5 --49 offset.

will replace original RFT to Bridgestones 225/40/18 and 255/35/18.

I will also put 12mm spacer front and 15mm spacer rears.

Any chance this will rub or have some issues ? I'm hoping it wont look too funny.

Thanks much.

Capri

HeelToe · 12-10-2012, 09:20 PM

Take a look at this thread

http://www.1addicts.com/forums/showthread.php?t=216413

Will most certainly rub in back. Front is ??? but probably ok.

capri · 12-11-2012, 02:52 AM

Quote:

Originally Posted by HeelToe

Take a look at this thread

http://www.1addicts.com/forums/showthread.php?t=216413

Will most certainly rub in back. Front is ??? but probably ok.

If thats the case, i wont install the spacer. Or just put 12mm spacers @ the rears. Front= no spacer.

VMRWheels · 12-11-2012, 08:09 PM

I would recommend smaller spacers. ~5-10mm.

SGM <3 · 12-14-2012, 01:40 AM

I just put 12mm fronts and 15mm rears on mine.

Not sure of my tire sizes compared to yours, but there's absolutely no rubbing at all.

capri · 12-17-2012, 06:19 PM

Quote:

Originally Posted by SGM <3

I just put 12mm fronts and 15mm rears on mine.

Not sure of my tire sizes compared to yours, but there's absolutely no rubbing at all.

on the stock tires and rims, i have those spacers and its fine, just wondering once i put on the 225 and 255s ? worst case scenario,i just remove them.

SGM <3 · 12-18-2012, 12:37 AM

Quote:

Originally Posted by capri

on the stock tires and rims, i have those spacers and its fine, just wondering once i put on the 225 and 255s ? worst case scenario,i just remove them.

IMO spacers are always worth the money because you may not need them now but you probably will at some point. And you could also run 12mm's in the back and none in the front too.

Not to mention they hold their value pretty well. I say go for it and report back

12-10-2012, 08:36 PM	#1
capri Private First Class Drives: 2011 135i Join Date: Sep 2012 Location: Philippines Posts: 146 iTrader: (0)	any rubs / issues on the following tire/wheel/spacer configuration ?? rims are stock Front 18 x 7.5--47 offset and Rears 18 x 8.5 --49 offset. will replace original RFT to Bridgestones 225/40/18 and 255/35/18. I will also put 12mm spacer front and 15mm spacer rears. Any chance this will rub or have some issues ? I'm hoping it wont look too funny. Thanks much. Capri
	Tweet

12-11-2012, 08:09 PM	#4
VMRWheels Major General Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA Posts: 9,719 iTrader: (4) Garage List 2008 5 Series [3.30]	I would recommend smaller spacers. ~5-10mm. __________________ NEW WHEEL MODEL: V721 \| LIVE INVENTORY: V705 V703 V710 \| V710 PICTURE THREAD p. 714-442-7916 extension 103 \| e. kevin.a@velocitymotoring.com \| f. facebook.com/vmrwheels f. flickr.com/vmrwheels

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-10-2012, 09:20 PM	#2
HeelToe Captain Drives: Rapidly from A to B Join Date: Jun 2005 Location: Illinois Posts: 750 iTrader: (1) Garage List 2013 BMW 135is [0.00] 2006 330i [5.00] 2000 323Ci [0.00]	Take a look at this thread http://www.1addicts.com/forums/showthread.php?t=216413 Will most certainly rub in back. Front is ??? but probably ok.

12-14-2012, 01:40 AM	#5
SGM <3 Internet Famous Drives: '09 SGM 135i Join Date: Nov 2012 Location: Kirkland, WA. Posts: 204 iTrader: (0)	I just put 12mm fronts and 15mm rears on mine. Not sure of my tire sizes compared to yours, but there's absolutely no rubbing at all.