BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      12-18-2012, 02:27 AM   #1
froop
Colonel
 
froop's Avatar
 
Drives: 08 AW 6MT E82
Join Date: Jul 2012
Location: Sydney, Australia

Posts: 2,055
iTrader: (2)

Will this rub? AD08's 235/40/18, 265/35/18

Hi,

I just got some Forgestar F14's. I believe they are 18x8.5 ET48 and 18x9 ET50.

Do you think I'll be able to fit the Yokohama AD08's with a 235/40 up the front and 265/35 at the rear without rubbing?

If it rubs, will a roll of the fenders suffice to stop any issue?

I'm on stock suspension but I have an E88 so I sit considerably lower than a stock E82.

Thanks!
__________________
Procede Rev 3 | PWM Meth | Mr5 Intake | AFE Scoops | ER FMIC | ER CP | TiAl BOV | AR Catless DPs | CP-E Exhaust | Forgestar F14s | M3 Strut Tower Brace | M3 Front Arms | M3 F + R Sway Bars | M3 Rear End Conversion | Moton Clubsports with Swift Springs | Vorshlag Camber Plates | ECS 2-Piece Rotors | SS Lines | Cool Carbons | BR Half Cage | BMWP SSK | BMWP Interior/Exterior Goodies | Blacklines | P3 Gauge | 1M Interior |
froop is offline   Australia
0
Reply With Quote
      12-18-2012, 02:48 AM   #2
135IS
Captain
 
Drives: 09 LMB 135I / AW 1M
Join Date: Feb 2010
Location: t.o

Posts: 741
iTrader: (1)

Garage List
2009 135i  [3.50]
it might rub in the back and a fender roll should do the job if your on stock suspension
__________________
LMB 135i: Gone
AW 1M: Current #211 of 220
135IS is offline   Canada
0
Reply With Quote
      12-18-2012, 06:14 PM   #3
froop
Colonel
 
froop's Avatar
 
Drives: 08 AW 6MT E82
Join Date: Jul 2012
Location: Sydney, Australia

Posts: 2,055
iTrader: (2)

Quote:
Originally Posted by 135IS
it might rub in the back and a fender roll should do the job if your on stock suspension
Thanks for the reply 135IS. Have you tried this personally?

I'm a bit worried because I read some posts saying 225 and 255 rubbed on stock wheels and E82 suspension.
__________________
Procede Rev 3 | PWM Meth | Mr5 Intake | AFE Scoops | ER FMIC | ER CP | TiAl BOV | AR Catless DPs | CP-E Exhaust | Forgestar F14s | M3 Strut Tower Brace | M3 Front Arms | M3 F + R Sway Bars | M3 Rear End Conversion | Moton Clubsports with Swift Springs | Vorshlag Camber Plates | ECS 2-Piece Rotors | SS Lines | Cool Carbons | BR Half Cage | BMWP SSK | BMWP Interior/Exterior Goodies | Blacklines | P3 Gauge | 1M Interior |
froop is offline   Australia
0
Reply With Quote
      12-18-2012, 07:27 PM   #4
bimmer Don
Private
 
Drives: 2012 135i m sport
Join Date: Sep 2012
Location: san berdardino

Posts: 93
iTrader: (0)

I also think the front will rub the strut on the inside. Because my pss 234 is really close and the ad08s run like 10 to 15 mil wider
bimmer Don is offline  
0
Reply With Quote
      12-18-2012, 07:41 PM   #5
Rukuss
Major
 
Rukuss's Avatar
 
Drives: 135i
Join Date: Aug 2010
Location: Portland

Posts: 1,197
iTrader: (-1)

Quote:
Originally Posted by bimmer Don View Post
I also think the front will rub the strut on the inside. Because my pss 234 is really close and the ad08s run like 10 to 15 mil wider
AD08 are 5mm wider then the Mitchelin super sports.
Rukuss is offline   United_States
0
Reply With Quote
      12-18-2012, 07:57 PM   #6
Gumball
Lieutenant
 
Gumball's Avatar
 
Drives: A45
Join Date: Sep 2008
Location: Sydney

Posts: 599
iTrader: (0)

From what I have read 235 Semi Slicks on 45 offset may need a small spacer to clear the strut.

I'm running near worn out 225 star spec atm and they are super close to the strut. Thinking of ordering 235's soon and seeing if I need to install a spacer or not. I am running 2 degrees neg camber on the front so should have enough room for a spacer if needed.

I'd be more concerned about the back - I am running 9.5 58mm wheels with 265 star specs. Rubbed on speedhumps and big dips. Had the fender rolled and no rub anymore. No way 265 would work with 9.5 50mm - unsure how the smaller diameter wheel will effect things.

Good luck Alex!
Gumball is offline   Australia
0
Reply With Quote
      12-18-2012, 08:48 PM   #7
bimmer Don
Private
 
Drives: 2012 135i m sport
Join Date: Sep 2012
Location: san berdardino

Posts: 93
iTrader: (0)

That what the spec says but they are wider then star specs. My 235 pss on et 45 rims are 3mil from the strut on stock suspension
bimmer Don is offline  
0
Reply With Quote
      12-18-2012, 09:17 PM   #8
blutattoo
First Lieutenant
 
Drives: 2012 135i
Join Date: Jun 2012
Location: Sacramento

Posts: 375
iTrader: (1)

Garage List
2012 BMW 135i  [0.00]
I've run both PSS's and Potenza RE-11's @ 265/35/18 in the rear with no issues. For the 235/40/18's up front I added Velocity motorsports 3mm spacers once I got the RE-11's because they rubbed the strut on the inside.

I'm not certain how the AD08's compare to the Potenza's, but I'm guessing they are close since the Potenza's are super wide with a square sidewall. I have Apex Arc-8's with an identical offset up front so I'm pretty sure you'll need a 3mm spacer. As for the rear my offsets are quite a bit different so I'm not totally certain about whether you'll rub but mine does fine with 265's in the back
blutattoo is offline  
0
Reply With Quote
      12-18-2012, 10:17 PM   #9
froop
Colonel
 
froop's Avatar
 
Drives: 08 AW 6MT E82
Join Date: Jul 2012
Location: Sydney, Australia

Posts: 2,055
iTrader: (2)

Thanks for everyone's replies!

I tried mounting the wheels without any tyres on them on the weekend. There seems to be lots of clearance at the back but the fronts sure are tight. I'd estimate about 2-3mm space between the rim and the strut and it sticks out a fair bit wider.

As the AD08's have wider/squarer shoulders, would that mean running smaller sizes (e.g. 225 and 255) would be equivalent to running a tyre with rounder shoulders such as the PSS in the above specs?
__________________
Procede Rev 3 | PWM Meth | Mr5 Intake | AFE Scoops | ER FMIC | ER CP | TiAl BOV | AR Catless DPs | CP-E Exhaust | Forgestar F14s | M3 Strut Tower Brace | M3 Front Arms | M3 F + R Sway Bars | M3 Rear End Conversion | Moton Clubsports with Swift Springs | Vorshlag Camber Plates | ECS 2-Piece Rotors | SS Lines | Cool Carbons | BR Half Cage | BMWP SSK | BMWP Interior/Exterior Goodies | Blacklines | P3 Gauge | 1M Interior |
froop is offline   Australia
0
Reply With Quote
      12-18-2012, 10:30 PM   #10
HeelToe
Major
 
HeelToe's Avatar
 
Drives: Rapidly from A to B
Join Date: Jun 2005
Location: Illinois

Posts: 1,044
iTrader: (2)

Garage List
2014 X1 2.8i xDrive  [0.00]
2000 323Ci  [3.00]
2006 330i  [4.50]
2013 BMW 135is  [4.50]
Running 235/40-18 Michelin pss on forgestar 8.5-45 with no rubbing on the Strut. The fender though I have had a couple times when I've rubbed on hard bumps. I have some Dinan camber plates. Not sure how much total negative camber is dialed in though.
HeelToe is offline   United_States
0
Reply With Quote
      12-19-2012, 07:19 AM   #11
GaryS
Colonel
 
Drives: 2009 135i 6MT
Join Date: Feb 2010
Location: Maryland

Posts: 2,089
iTrader: (0)

Garage List
2009 135i  [3.25]
Quote:
Originally Posted by bimmer Don View Post
That what the spec says but they are wider then star specs. My 235 pss on et 45 rims are 3mil from the strut on stock suspension
My 235/40 AD08s on 8.5" et45 rims do not rub on the strut. They did sometimes rub on the fender with -2.0 camber, but not with -3.2 camber.
GaryS is offline  
0
Reply With Quote
      12-19-2012, 09:14 AM   #12
1_dez
Private
 
Drives: 1er
Join Date: Jun 2012
Location: Canberra

Posts: 78
iTrader: (0)

So I'm running the apex ec7 wheels the 1 series fitment, no fenders rolled.

With the neova ad08 225/40F and 265/35R, and can confirm no rubbing on m-sport or coilovers dropped 1.5 inchs with -1.5 camber on the rear. (PM me if you need a picture.)

Actually, on second thought, I'm running a 5mm spacer on the front for better inner clearance and better flush fitment. You can work out the final specs but no guard rubbing or anything with 4 people in the car and on hard cornering.

Last edited by 1_dez; 12-19-2012 at 09:19 AM.
1_dez is offline   Australia
0
Reply With Quote
      12-20-2012, 08:35 PM   #13
VMRWheels
Lieutenant General
 
VMRWheels's Avatar
 
Drives: BMW
Join Date: Jun 2007
Location: Anaheim, CA

Posts: 12,545
iTrader: (4)

Garage List
2008 5 Series  [3.30]
Yup AD08's run a bit meatier since they're considered a high performance street tire.
__________________
VMRWheels is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:08 PM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST