need some help on wheel set up

slow35i · 12-25-2012, 04:17 PM

hi guys, looking to buy some bbs LM replica's and just need some help figuring out if these specs would be ok 18x8.5 front/18x9.5 rear, 45mm offset front and rear, lip size 1.25" front/2.5" rear, hub bore size 72.6mm
i am also wanting to lower the vehicle with H&R super sport springs

b1aze · 12-25-2012, 04:38 PM

The 45 offset in the rear will force you to run a narrow 255/average 245 tire in the rear. The front offset is fine for a 225/narrow 235 tire. If you're ok with the "stretched" look in the rear, it should be a good looking setup.

slow35i · 12-25-2012, 10:10 PM

Dont really want the stretched look, would 225 front & 245 rear work ok?

12-25-2012, 04:17 PM	#1
slow35i Enlisted Member Drives: 13' glacier silver 328xi Join Date: Oct 2012 Location: Grandview, WA Posts: 47 iTrader: (0)	need some help on wheel set up hi guys, looking to buy some bbs LM replica's and just need some help figuring out if these specs would be ok 18x8.5 front/18x9.5 rear, 45mm offset front and rear, lip size 1.25" front/2.5" rear, hub bore size 72.6mm i am also wanting to lower the vehicle with H&R super sport springs
	0 Tweet

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-25-2012, 04:38 PM	#2
b1aze Just one more taste... Drives: 2010 135i Join Date: Aug 2012 Location: Shirley, MA Posts: 1,419 iTrader: (14)	The 45 offset in the rear will force you to run a narrow 255/average 245 tire in the rear. The front offset is fine for a 225/narrow 235 tire. If you're ok with the "stretched" look in the rear, it should be a good looking setup.
	0

12-25-2012, 10:10 PM	#3
slow35i Enlisted Member Drives: 13' glacier silver 328xi Join Date: Oct 2012 Location: Grandview, WA Posts: 47 iTrader: (0)	Dont really want the stretched look, would 225 front & 245 rear work ok?
	0