Dyno time - BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)

kleach18 · 01-29-2013, 02:22 PM

Does anybody have any info on some shops near Bamberg with a dyno? I want to get a baseline of my car before I install my collection of mods I have saving up.

I'm willing to take a little drive if I need to.

Elsabor67 · 01-29-2013, 02:27 PM

There's 2 dyno's here in Stuttgart.

1. Schropp Farzeugteckhnic: They have a Superflow AWD dyno and by what i've heard is pretty accurate.
http://www.schropp-fahrzeugtechnik.de/usa_index.html

2. http://www.speed-concept.de/ They have a Dynojet at the shop. I dropped 416PS at the wheels on that one last october. The owner is Steven. I can get you his number if you want it. He's a former 135i owner.

kleach18 · 01-29-2013, 02:32 PM

Are any of those shops open on the weekends(I know in Germany that's a long shot)? If not then I have a few long weekends coming up. Maybe I can head that way for a day on a Friday or Monday..

Elsabor67 · 01-29-2013, 03:33 PM

I think SpeedConcepts is. Schropp is also but half day and doesn't do dynos on saturday.

Mr Kleen · 01-29-2013, 04:15 PM

Make sure to go back to the same dyno after the mods...

kleach18 · 01-29-2013, 04:24 PM

Quote:

Originally Posted by Mr Kleen

Make sure to go back to the same dyno after the mods...

Definitely!

Going from stock n55 with BMW PE with y pipe replacing rear resonator.
to
BMW PE, 3.5 catless DP, JB4, and drop in upgraded filter(still trying to decide on this one, thinking about going with the BMS n55 performance intake)

That_1_Guy · 01-29-2013, 04:45 PM

Quote:

Originally Posted by kleach18

Quote:

Originally Posted by Mr Kleen

Make sure to go back to the same dyno after the mods...

Definitely!

Going from stock n55 with BMW PE with y pipe replacing rear resonator.
to
BMW PE, 3.5 catless DP, JB4, and drop in upgraded filter(still trying to decide on this one, thinking about going with the BMS n55 performance intake)

Speed concepts is open till 4 on Saturdays. Great people, and great pricing for multiple pulls.

kleach18 · 01-30-2013, 06:43 AM

Shot him a email.

Anybody else want to make a dyno run?

Mr Kleen · 01-30-2013, 08:21 AM

I've got the BMS intake. Nice piece and cheap. To install it correctly I had to remove the plastic cowling but it wasn't bad at all.

fabian · 01-31-2013, 03:03 PM

henni is near Stuttgart too, www.henni-gmbh.de
superflow dyno

kleach18 · 01-31-2013, 03:53 PM

I tried to get a hold of a few with no luck.. I will try again tomorrow.

How far in advance do you need to schedule at Speed concepts?

Bmwbreed · 01-31-2013, 11:22 PM

Quote:

Originally Posted by kleach18

Shot him a email.

Anybody else want to make a dyno run?

I'd go with ya if I was closer. There's no way a place would be open here on sat. These people barely work during the week haha. Plus to even find a dyno here I prolly have to drive to Madrid or Barcelona.

Elsabor67 · 02-01-2013, 12:42 AM

Quote:

Originally Posted by fabian

henni is near Stuttgart too, www.henni-gmbh.de
superflow dyno

Wow, that's the same kind of dyno Schropp has. Interesting.

fabian · 02-01-2013, 02:56 AM

yep, the dyno is a bit older but I think there will be no difference in the printout ;-) I also like the Schropp dyno, especially for dyno days with the large monitor and the room beside the dyno.

JK135i · 02-03-2013, 04:21 PM

If you go to speed concept you have to drop 9% off whatever you end up with.

kleach18 · 02-08-2013, 06:29 AM

Car is getting strapped to the dyno time now.... Im going to stick my go pro in to film it. I will post results and a video today hopefully...

kleach18 · 02-08-2013, 08:17 AM

322 whp 465 nm torque

Lifestyler · 02-08-2013, 10:56 AM

stock run ?

kleach18 · 02-08-2013, 11:29 AM

Yeah, the only mod is a BMW PE with y-pipe installed

kleach18 · 02-08-2013, 11:33 AM

Other mods are in the mail as we speak....

FOACAD · 02-08-2013, 01:40 PM

Whoa, that seems really high for stock.

Do you have an 'is' with the PPK on it or something, lol.

kleach18 · 02-08-2013, 01:56 PM

Nope just stock with BMW PE. Its a dynojet so if I subtract 9% its 293 hp and 423 nm or 311 ft/lb

01-29-2013, 02:22 PM	#1
kleach18 Essayons Drives: 2013 135i Join Date: Aug 2012 Location: Bavaria, Germany Posts: 266 iTrader: (0)	Dyno time Does anybody have any info on some shops near Bamberg with a dyno? I want to get a baseline of my car before I install my collection of mods I have saving up. I'm willing to take a little drive if I need to. __________________ / 135i - M-Sport / 6-Speed / BMW Performance Exhaust / BMS Intake / JB4 Stage 2 ISO + Flex Fuel Wires / BMS 3.5in Down Pipe / CP-E Charge Pipe / BMS H8 AE / APEX EC-7's / COBB Tuning Sport Springs / ---Soon to come---- Intercooler / Meth
	Tweet

01-29-2013, 02:27 PM	#2
Elsabor67 aiming for 450..... Drives: La Jeva ;-) Join Date: Feb 2009 Location: Stuttgart, Ge :-) Posts: 2,336 iTrader: (21) Garage List 2009 135i [5.00]	There's 2 dyno's here in Stuttgart. 1. Schropp Farzeugteckhnic: They have a Superflow AWD dyno and by what i've heard is pretty accurate. http://www.schropp-fahrzeugtechnik.de/usa_index.html 2. http://www.speed-concept.de/ They have a Dynojet at the shop. I dropped 416PS at the wheels on that one last october. The owner is Steven. I can get you his number if you want it. He's a former 135i owner. __________________ Quote from Ezeedee regarding car mods: "you're only done when you sell the car "

01-29-2013, 02:32 PM	#3
kleach18 Essayons Drives: 2013 135i Join Date: Aug 2012 Location: Bavaria, Germany Posts: 266 iTrader: (0)	Are any of those shops open on the weekends(I know in Germany that's a long shot)? If not then I have a few long weekends coming up. Maybe I can head that way for a day on a Friday or Monday.. __________________ / 135i - M-Sport / 6-Speed / BMW Performance Exhaust / BMS Intake / JB4 Stage 2 ISO + Flex Fuel Wires / BMS 3.5in Down Pipe / CP-E Charge Pipe / BMS H8 AE / APEX EC-7's / COBB Tuning Sport Springs / ---Soon to come---- Intercooler / Meth

01-29-2013, 03:33 PM	#4
Elsabor67 aiming for 450..... Drives: La Jeva ;-) Join Date: Feb 2009 Location: Stuttgart, Ge :-) Posts: 2,336 iTrader: (21) Garage List 2009 135i [5.00]	I think SpeedConcepts is. Schropp is also but half day and doesn't do dynos on saturday. __________________ Quote from Ezeedee regarding car mods: "you're only done when you sell the car "

01-29-2013, 04:15 PM	#5
Mr Kleen teh porcupine Drives: 2012 135i "Nina" Join Date: May 2011 Location: Wiesbaden Posts: 1,236 iTrader: (0) Garage List 2012 BMW 135i [0.00]	Make sure to go back to the same dyno after the mods... __________________ 1addicts at Stelv1o Pass

01-30-2013, 06:43 AM	#8
kleach18 Essayons Drives: 2013 135i Join Date: Aug 2012 Location: Bavaria, Germany Posts: 266 iTrader: (0)	Shot him a email. Anybody else want to make a dyno run? __________________ / 135i - M-Sport / 6-Speed / BMW Performance Exhaust / BMS Intake / JB4 Stage 2 ISO + Flex Fuel Wires / BMS 3.5in Down Pipe / CP-E Charge Pipe / BMS H8 AE / APEX EC-7's / COBB Tuning Sport Springs / ---Soon to come---- Intercooler / Meth

01-30-2013, 08:21 AM	#9
Mr Kleen teh porcupine Drives: 2012 135i "Nina" Join Date: May 2011 Location: Wiesbaden Posts: 1,236 iTrader: (0) Garage List 2012 BMW 135i [0.00]	I've got the BMS intake. Nice piece and cheap. To install it correctly I had to remove the plastic cowling but it wasn't bad at all. __________________ 1addicts at Stelv1o Pass

01-31-2013, 03:03 PM	#10
fabian New Member Drives: 135i Join Date: Nov 2012 Location: Stuttgart/Germany Posts: 18 iTrader: (0)	henni is near Stuttgart too, www.henni-gmbh.de superflow dyno

01-31-2013, 03:53 PM	#11
kleach18 Essayons Drives: 2013 135i Join Date: Aug 2012 Location: Bavaria, Germany Posts: 266 iTrader: (0)	I tried to get a hold of a few with no luck.. I will try again tomorrow. How far in advance do you need to schedule at Speed concepts? __________________ / 135i - M-Sport / 6-Speed / BMW Performance Exhaust / BMS Intake / JB4 Stage 2 ISO + Flex Fuel Wires / BMS 3.5in Down Pipe / CP-E Charge Pipe / BMS H8 AE / APEX EC-7's / COBB Tuning Sport Springs / ---Soon to come---- Intercooler / Meth

02-01-2013, 02:56 AM	#14
fabian New Member Drives: 135i Join Date: Nov 2012 Location: Stuttgart/Germany Posts: 18 iTrader: (0)	yep, the dyno is a bit older but I think there will be no difference in the printout ;-) I also like the Schropp dyno, especially for dyno days with the large monitor and the room beside the dyno.

02-03-2013, 04:21 PM	#15
JK135i 8:39 Drives: 2010 135i Join Date: Mar 2010 Location: Jacksonville, Florida Posts: 656 iTrader: (1) Garage List 2010 135i [4.67]	If you go to speed concept you have to drop 9% off whatever you end up with. __________________ "Never attribute to malice that which is adequately explained by stupidity."

02-08-2013, 06:29 AM	#16
kleach18 Essayons Drives: 2013 135i Join Date: Aug 2012 Location: Bavaria, Germany Posts: 266 iTrader: (0)	Car is getting strapped to the dyno time now.... Im going to stick my go pro in to film it. I will post results and a video today hopefully... __________________ / 135i - M-Sport / 6-Speed / BMW Performance Exhaust / BMS Intake / JB4 Stage 2 ISO + Flex Fuel Wires / BMS 3.5in Down Pipe / CP-E Charge Pipe / BMS H8 AE / APEX EC-7's / COBB Tuning Sport Springs / ---Soon to come---- Intercooler / Meth

02-08-2013, 08:17 AM	#17
kleach18 Essayons Drives: 2013 135i Join Date: Aug 2012 Location: Bavaria, Germany Posts: 266 iTrader: (0)	322 whp 465 nm torque __________________ / 135i - M-Sport / 6-Speed / BMW Performance Exhaust / BMS Intake / JB4 Stage 2 ISO + Flex Fuel Wires / BMS 3.5in Down Pipe / CP-E Charge Pipe / BMS H8 AE / APEX EC-7's / COBB Tuning Sport Springs / ---Soon to come---- Intercooler / Meth

02-08-2013, 10:56 AM	#18
Lifestyler Private Drives: 135i copue Join Date: Nov 2010 Location: Germany Posts: 66 iTrader: (0)	stock run ? __________________ Mods: Bilstein b14, OZ Ultraleggeras with michelin PS II,BMW PP CarbonDiffusor,BMW PP CarbonTrunk Lip,AFE stageII Intake with Scoops,BMW PP II Steering wheel,Wagner evoII FMIC,bms CP,FULL 3" Custommade Exhaust system,LUX V3,Cobb AP and some more...

02-08-2013, 11:29 AM	#19
kleach18 Essayons Drives: 2013 135i Join Date: Aug 2012 Location: Bavaria, Germany Posts: 266 iTrader: (0)	Yeah, the only mod is a BMW PE with y-pipe installed __________________ / 135i - M-Sport / 6-Speed / BMW Performance Exhaust / BMS Intake / JB4 Stage 2 ISO + Flex Fuel Wires / BMS 3.5in Down Pipe / CP-E Charge Pipe / BMS H8 AE / APEX EC-7's / COBB Tuning Sport Springs / ---Soon to come---- Intercooler / Meth

02-08-2013, 11:33 AM	#20
kleach18 Essayons Drives: 2013 135i Join Date: Aug 2012 Location: Bavaria, Germany Posts: 266 iTrader: (0)	Other mods are in the mail as we speak.... __________________ / 135i - M-Sport / 6-Speed / BMW Performance Exhaust / BMS Intake / JB4 Stage 2 ISO + Flex Fuel Wires / BMS 3.5in Down Pipe / CP-E Charge Pipe / BMS H8 AE / APEX EC-7's / COBB Tuning Sport Springs / ---Soon to come---- Intercooler / Meth

02-08-2013, 01:40 PM	#21
FOACAD Airborne! Drives: 2012 AW/CR 135i Msport Join Date: Nov 2011 Location: Schweinfurt, Germany Posts: 468 iTrader: (0)	Whoa, that seems really high for stock. Do you have an 'is' with the PPK on it or something, lol.

02-08-2013, 01:56 PM	#22
kleach18 Essayons Drives: 2013 135i Join Date: Aug 2012 Location: Bavaria, Germany Posts: 266 iTrader: (0)	Nope just stock with BMW PE. Its a dynojet so if I subtract 9% its 293 hp and 423 nm or 311 ft/lb __________________ / 135i - M-Sport / 6-Speed / BMW Performance Exhaust / BMS Intake / JB4 Stage 2 ISO + Flex Fuel Wires / BMS 3.5in Down Pipe / CP-E Charge Pipe / BMS H8 AE / APEX EC-7's / COBB Tuning Sport Springs / ---Soon to come---- Intercooler / Meth

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search