BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      03-21-2013, 01:49 PM   #1
ilikebmxbikes
Colonel
 
ilikebmxbikes's Avatar
 
Drives: '08 135i
Join Date: Apr 2011
Location: San Francisco

Posts: 2,346
iTrader: (25)

135I to 1M bodywork Complete Info w/ PN and pics

Enough people have asked for it so here it is. Venom and I's cars are 99% done and I feel comfortable that this list is complete.

This information couldn't have been completed without Sk8fe, Tony135i, Phil@Reeves BMW, Venom and I's hard work and time. Thanks to everyone who has contributed to this information.

I have the PN's in groups. They are blocked off as I placed the orders for the parts. Do note, you need everything.




51-75-8-051-609 UNDERHOOD SHIELD 1 109.55

51-11-8-057-717 TRIM COVER, BUMP 1 308.53

51-12-8-052-495 BUMPER TRIM PANE 1 334.87

41-35-8-052-625 SIDE PANEL, FRON 1 238.49

41-35-8-052-626 SIDE PANEL, FRON 1 238.49

51-48-8-051-598 HEAT INSULATOR R 1 58.58

51-71-8-051-597 MULTIFUNCTIONAL 1 176.05

18-20-7-798-560 RUBBER MOUNTING 1 26.63




51-11-7-900-764 Grid, Center

51-11-8-051-613 Flap, Towing Eye, P

51-11-8-053-877 Set of Covers

51-77-8-052-517 Supporting Ledge Le

51-77-8-052-518 Supporting Ledge Ri

51-64-8-051-987 Headlight Bracket

51-64-8-051-988 Headlight Bracket

51-74-8-051-605 Air Duct, Engine Oi

51-74-8-051-606 Air Duct, Engine Oi

51-74-8-051-604 Air Duct, Bottom

51-71-8-051-595 Cover, WheelL Housi

51-71-8-051-596 Cover, WheelL Housi

51-71-8-045-553 Cover Left

51-71-8-045-554 Cover Right

51718051591 - Wheel Housing Bottom Left

51718051592 - Wheel Housing Bottom Right

51-13-8-051-601 Chrome Clip, Left

51-13-8-051-602 Chrome Clip, Right

51-77-8-053-879 Rocker Panel Trim

51-77-8-053-880 Rocker Panel Trim

51-13-8-051-817 Left Base

51-13-8-051-818 Right Base

51-75-8-051-609 Underhood shield

61-67-8-051-590 Windshield Cleaning

Rear Bumper Support - These have the exhaust hangers for the 1M exhaust

51128051589 Carrier, bumper rear

51127131741 WASHER-GASKET

Rear Bumper Side Brackets

51128051611 GUIDE LEFT

51128051612 GUIDE RIGHT

M Door Sill - The ones on the car often break during install. New ones should be purchased.

51478045291 M Trim Piece, front left entry

51478045292 M Trim Piece, front right entry


Bumper seals - top

51647134102 - Seal, front panel/cooler at top

51768045445 - Seal, equipment module, front

Charcoal Filter tubes etc.

08 Vent Pipe 16137845193

10 Vent Pipe 16137845195

11 Exhaust steam pipe with dust filter 16137845194

Exhaust Hangars - 1M specific

3X 18207798560

Sideskirt hardware - Bottom - same as 135i, i was just missing a few

2X 07147122913

Battery Cables

61129217036 Battery cable (plus pole)

61127845120 BATTERY CABLE NEGATIVE

61126929715 Positive battery lead
__________________
MY Build Log
08 AW 135i | Cobb | ETS FMIC | ER CP w/ Tial Bov | AR Catted Downpipes | Berk Mids | Meisterschaft GT SUS 1M |M3 Control Arms | M3 Sways | M3 Rear Subframe Bushings | Wavetrac LSD | AST 4200 DA Coilovers | HRE R43 | Hankook R-S3 |Full BMW Performance Interior | Revozport 1M Raze Aero Package in Satin Carbon |1M Body Conversion|
ilikebmxbikes is offline  
0
Reply With Quote
      03-21-2013, 02:45 PM   #2
JDelphiki
Enlisted Member
 
Drives: 2009 TSM 135i
Join Date: Mar 2010
Location: Texas

Posts: 41
iTrader: (0)

Figured I'd ask before I actually had to put some effort into it lol, what was your total price for all the parts not including labor?
JDelphiki is offline   United_States
0
Reply With Quote
      03-21-2013, 03:13 PM   #3
ilikebmxbikes
Colonel
 
ilikebmxbikes's Avatar
 
Drives: '08 135i
Join Date: Apr 2011
Location: San Francisco

Posts: 2,346
iTrader: (25)

Quote:
Originally Posted by JDelphiki
Figured I'd ask before I actually had to put some effort into it lol, what was your total price for all the parts not including labor?
Probably $2500-3k
__________________
MY Build Log
08 AW 135i | Cobb | ETS FMIC | ER CP w/ Tial Bov | AR Catted Downpipes | Berk Mids | Meisterschaft GT SUS 1M |M3 Control Arms | M3 Sways | M3 Rear Subframe Bushings | Wavetrac LSD | AST 4200 DA Coilovers | HRE R43 | Hankook R-S3 |Full BMW Performance Interior | Revozport 1M Raze Aero Package in Satin Carbon |1M Body Conversion|
ilikebmxbikes is offline  
0
Reply With Quote
      03-21-2013, 03:24 PM   #4
135Pats
Need more fuel
 
135Pats's Avatar
 
Drives: 135i
Join Date: May 2012
Location: Maryland

Posts: 4,508
iTrader: (1)

Quote:
Originally Posted by ilikebmxbikes View Post
Probably $2500-3k
That's actually not as bad as I would have guessed. Sweet
__________________
E88 FBO N54 Alpinweiss/Coral Red/Meisterschaft Race/Berk Resonated/Macht Schnell 3"/ER CP/Synapse/VRSF FMIC/FFTEC LPFP/HFS-4 DO Stainless Lines/BMS DCI/BMS Thermostat Delete/Rob Beck PCV Valve + Cap/BMS OCC/PTF E50/ST Coilovers/M3 Front Control Arms + Tension Rods/M3 Subframe Bushings/Apex ARC-8/Project Kics/Macht Schnell Studs/Rogue Transmission Mounts/Alpina TCU Flash/Icarbon/Kerscher/BMW Performance/Cyba
135Pats is offline   United_States
0
Reply With Quote
      03-21-2013, 03:38 PM   #5
Venom
Lieutenant Colonel
 
Venom's Avatar
 
Drives: Teg DC2 + E82 135i
Join Date: May 2011
Location: East Bay, CA

Posts: 1,988
iTrader: (5)

Garage List
2008 BMW 135i  [4.25]
Send a message via AIM to Venom
My name is Venom and I approve of this message.

I would also like to thank Dan@UnitedBMW for giving me the part numbers for the exhaust mod.

Do note that there was some custom work needed for our relay cables. We do not know what P/N that may be for an OEM relay cable.

I would also like to add thanks to David M. of BMW of Concord Collision Center for diligently confirming the parts list and what other parts ended up being needed like the rear bumper caps and the rear bumper support bracket!
__________________
Venom Build Log
Mods: JB4 G5 ISO, RR DPs, GTHaus Meistershaft Exhaust, RKP GTS Wing, Wagner FMIC, VMR V701s in Scarlet Red, Custom shift knob, Full 1M Body Conversion, and more.

Prius is Latin for impotence.

Last edited by Venom; 03-21-2013 at 05:09 PM.
Venom is offline   United_States
0
Reply With Quote
      04-07-2013, 10:02 PM   #6
adevangel84
Second Lieutenant
 
adevangel84's Avatar
 
Drives: 2006 E46 M3 (RIP)
Join Date: Aug 2012
Location: New Orleans

Posts: 251
iTrader: (2)

Very nice... I read both of the builds and it inspired me to do a 1m conversion... Eventually.. lol Mad props to you both and I love the cars!!!
adevangel84 is offline  
0
Reply With Quote
      12-07-2013, 02:05 PM   #7
firokzz
just another 1addict
 
firokzz's Avatar
 
Drives: 135i, grey, convertible, stick
Join Date: Jul 2013
Location: California

Posts: 70
iTrader: (0)

Quote:
Originally Posted by ilikebmxbikes View Post
Probably $2500-3k
you are straight up lying right now!!!!!
only $2500-$3000!!!!!!
i thought venom's costed like $8,000
thats crazy!!!!

if thats all it takes (plus labor) I'm going to start saving ASAP!!!!
technically this is pretty doable!!
__________________
Brutus
firokzz is offline   United_States
0
Reply With Quote
      12-07-2013, 02:07 PM   #8
Stohlen
Major
 
Drives: AW 135i
Join Date: Aug 2012
Location: Waterford, Mi

Posts: 1,191
iTrader: (2)

Garage List
2008 BMW 135i  [2.83]
Quote:
Originally Posted by firokzz View Post
you are straight up lying right now!!!!!
only $2500-$3000!!!!!!
i thought venom's costed like $8,000
thats crazy!!!!

if thats all it takes (plus labor) I'm going to start saving ASAP!!!!
It costs $8000 with labor and random other tidbits they opted for. Dont forget wheels and tires.
__________________
Build thread: http://www.1addicts.com/forums/showthread.php?t=748935


I will never buy from Forgestar or EAS again after my nightmare wheel purchase.
Stohlen is offline  
0
Reply With Quote
      12-07-2013, 02:10 PM   #9
firokzz
just another 1addict
 
firokzz's Avatar
 
Drives: 135i, grey, convertible, stick
Join Date: Jul 2013
Location: California

Posts: 70
iTrader: (0)

Quote:
Originally Posted by Stohlen View Post
It costs $8000 with labor and random other tidbits they opted for. Dont forget wheels and tires.
oh, so than its back to being no more than a dream :/
__________________
Brutus
firokzz is offline   United_States
0
Reply With Quote
      12-07-2013, 02:40 PM   #10
Venom
Lieutenant Colonel
 
Venom's Avatar
 
Drives: Teg DC2 + E82 135i
Join Date: May 2011
Location: East Bay, CA

Posts: 1,988
iTrader: (5)

Garage List
2008 BMW 135i  [4.25]
Send a message via AIM to Venom
yep the 2500-3k does not account for body work, paint, and labor costs; it only accounts for the OEM parts listed here which have gone up a little in price since our purchase. All told, depending on the shop It's between 7k and 10k.

figure new wheels on top of that too because you won't want to run the high offset 1er wheels. I have a couple pictures on my build thread of how funky that looks.
__________________
Venom Build Log
Mods: JB4 G5 ISO, RR DPs, GTHaus Meistershaft Exhaust, RKP GTS Wing, Wagner FMIC, VMR V701s in Scarlet Red, Custom shift knob, Full 1M Body Conversion, and more.

Prius is Latin for impotence.
Venom is offline   United_States
0
Reply With Quote
      12-08-2013, 03:48 AM   #11
Malexander
New Member
 
Drives: Bmw 135i
Join Date: Jul 2013
Location: Sweden

Posts: 23
iTrader: (0)

[quote=
51-75-8-051-609 UNDERHOOD SHIELD 1 109.55

51-11-8-057-717 TRIM COVER, BUMP 1 308.53

51-12-8-052-495 BUMPER TRIM PANE 1 334.87

41-35-8-052-625 SIDE PANEL, FRON 1 238.49

41-35-8-052-626 SIDE PANEL, FRON 1 238.49

51-48-8-051-598 HEAT INSULATOR R 1 58.58

51-71-8-051-597 MULTIFUNCTIONAL 1 176.05

18-20-7-798-560 RUBBER MOUNTING 1 26.63

[/QUOTE]


Is it the price of the parts in the end of the sentence?

Big thanks for doing this along with the other guys! Really inspiring the read about the project. Im tempted to do it myself!
Malexander is offline  
0
Reply With Quote
      12-08-2013, 06:47 AM   #12
Curare86
Lieutenant
 
Drives: 135i
Join Date: May 2012
Location: perth

Posts: 531
iTrader: (0)

Quote:
Originally Posted by Malexander View Post
Is it the price of the parts in the end of the sentence?

Big thanks for doing this along with the other guys! Really inspiring the read about the project. Im tempted to do it myself!
Yes it is
Curare86 is offline  
0
Reply With Quote
      12-08-2013, 12:50 PM   #13
ilikebmxbikes
Colonel
 
ilikebmxbikes's Avatar
 
Drives: '08 135i
Join Date: Apr 2011
Location: San Francisco

Posts: 2,346
iTrader: (25)

[quote=Malexander]
Quote:
Originally Posted by
51-75-8-051-609 UNDERHOOD SHIELD 1 109.55

51-11-8-057-717 TRIM COVER, BUMP 1 308.53

51-12-8-052-495 BUMPER TRIM PANE 1 334.87

41-35-8-052-625 SIDE PANEL, FRON 1 238.49

41-35-8-052-626 SIDE PANEL, FRON 1 238.49

51-48-8-051-598 HEAT INSULATOR R 1 58.58

51-71-8-051-597 MULTIFUNCTIONAL 1 176.05

18-20-7-798-560 RUBBER MOUNTING 1 26.63

[/QUOTE


Is it the price of the parts in the end of the sentence?

Big thanks for doing this along with the other guys! Really inspiring the read about the project. Im tempted to do it myself!
Those are the prices 12 months ago. I ordered a new bumper and underbody shield and they were ~$50 more than I originally paid each. I don't know what other prices are affected but I would assume all large bumpers, skirts, etc have gone up.
__________________
MY Build Log
08 AW 135i | Cobb | ETS FMIC | ER CP w/ Tial Bov | AR Catted Downpipes | Berk Mids | Meisterschaft GT SUS 1M |M3 Control Arms | M3 Sways | M3 Rear Subframe Bushings | Wavetrac LSD | AST 4200 DA Coilovers | HRE R43 | Hankook R-S3 |Full BMW Performance Interior | Revozport 1M Raze Aero Package in Satin Carbon |1M Body Conversion|
ilikebmxbikes is offline  
0
Reply With Quote
      02-20-2014, 11:42 AM   #14
scottn2retro
Captain
 
scottn2retro's Avatar
 
Drives:
Join Date: Oct 2007

Posts: 673
iTrader: (0)

Hi All -

On our 135i race car, we're moving up in class, so I'm doing kind of 1M front conversion.
https://www.facebook.com/sctsracing/...type=3&theater

So far, I've only used the 1M front bumper, fenders and front fender liners, but we're a race car going to be in prepared class. For a nice street car, I can definitely see wanting to do the rocker panels and rear fender liners. You could easily fab a piece of plastic from the removed fender liners (and use the speed clips) to fill the 2 holes in between the front center undertray and the new 1M front fender liners

__________________
08 135i - Stock Class BMW Club Racer
www.TotalMotorOils.us
Photo Gallery
scottn2retro is offline  
0
Reply With Quote
      02-20-2014, 03:13 PM   #15
Fifty3bags
Lieutenant
 
Fifty3bags's Avatar
 
Drives: 2010 135i
Join Date: Apr 2013
Location: Dothan, AL

Posts: 438
iTrader: (0)

Quote:
Originally Posted by scottn2retro View Post
Hi All -

On our 135i race car, we're moving up in class, so I'm doing kind of 1M front conversion.
https://www.facebook.com/sctsracing/...type=3&theater

So far, I've only used the 1M front bumper, fenders and front fender liners, but we're a race car going to be in prepared class. For a nice street car, I can definitely see wanting to do the rocker panels and rear fender liners. You could easily fab a piece of plastic from the removed fender liners (and use the speed clips) to fill the 2 holes in between the front center undertray and the new 1M front fender liners

scottn2retro, Can you get some pictures of where the sideskirt meets the fender, I'd like to see what the width difference looks like.
__________________
Alpine White | Coral Red | 6MT
Fifty3bags is offline  
0
Reply With Quote
      02-20-2014, 03:27 PM   #16
ilikebmxbikes
Colonel
 
ilikebmxbikes's Avatar
 
Drives: '08 135i
Join Date: Apr 2011
Location: San Francisco

Posts: 2,346
iTrader: (25)

Quote:
Originally Posted by Fifty3bags View Post
scottn2retro, Can you get some pictures of where the sideskirt meets the fender, I'd like to see what the width difference looks like.
These are the best photos I can find of a car with 1M Fenders on a 135i sideskirt. I got these off FB, if i had the owners Bimmerpost account I would link them. if anyone has it, please let me know.




__________________
MY Build Log
08 AW 135i | Cobb | ETS FMIC | ER CP w/ Tial Bov | AR Catted Downpipes | Berk Mids | Meisterschaft GT SUS 1M |M3 Control Arms | M3 Sways | M3 Rear Subframe Bushings | Wavetrac LSD | AST 4200 DA Coilovers | HRE R43 | Hankook R-S3 |Full BMW Performance Interior | Revozport 1M Raze Aero Package in Satin Carbon |1M Body Conversion|
ilikebmxbikes is offline  
0
Reply With Quote
      02-20-2014, 03:41 PM   #17
Fifty3bags
Lieutenant
 
Fifty3bags's Avatar
 
Drives: 2010 135i
Join Date: Apr 2013
Location: Dothan, AL

Posts: 438
iTrader: (0)

Updated the prices with what getBMWparts.com has listed:

51-75-8-051-609 UNDERHOOD SHIELD 1 182.45

51-11-8-057-717 TRIM COVER, BUMP 1 380.90

51-12-8-052-495 BUMPER TRIM PANE 1 425.79

41-35-8-052-625 SIDE PANEL, FRON 1 288.78

41-35-8-052-626 SIDE PANEL, FRON 1 288.78

51-48-8-051-598 HEAT INSULATOR R 1 61.17

51-71-8-051-597 MULTIFUNCTIONAL 1 199.74

18-20-7-798-560 RUBBER MOUNTING 1 16.37




51-11-7-900-764 Grid, Center $66.55

51-11-8-051-613 Flap, Towing Eye, P $16.48

51-11-8-053-877 Set of Covers $22.30

51-77-8-052-517 Supporting Ledge Le $39.22

51-77-8-052-518 Supporting Ledge Ri $39.22

51-64-8-051-987 Headlight Bracket $33.36

51-64-8-051-988 Headlight Bracket $33.36

51-74-8-051-605 Air Duct, Engine Oi $24.93

51-74-8-051-606 Air Duct, Engine Oi $24.93

51-74-8-051-604 Air Duct, Bottom $39.04

51-71-8-051-595 Cover, WheelL Housi $58.52

51-71-8-051-596 Cover, WheelL Housi $58.52

51-71-8-045-553 Cover Left $4.62

51-71-8-045-554 Cover Right $4.62

51718051591 - Wheel Housing Bottom Left $42.70

51718051592 - Wheel Housing Bottom Right $42.70

51-13-8-051-601 Chrome Clip, Left $29.47

51-13-8-051-602 Chrome Clip, Right $29.47

51-77-8-053-879 Rocker Panel Trim $163.98

51-77-8-053-880 Rocker Panel Trim $163.98

51-13-8-051-817 Left Base $6.65

51-13-8-051-818 Right Base $6.81

51-75-8-051-609 Underhood shield $182.45

61-67-8-051-590 Windshield Cleaning $134.04

Rear Bumper Support - These have the exhaust hangers for the 1M exhaust

51128051589 Carrier, bumper rear $184.50

51127131741 WASHER-GASKET $1.88

Rear Bumper Side Brackets

51128051611 GUIDE LEFT $24.23

51128051612 GUIDE RIGHT $24.23

M Door Sill - The ones on the car often break during install. New ones should be purchased.

51478045291 M Trim Piece, front left entry $54.30

51478045292 M Trim Piece, front right entry $54.30


Bumper seals - top

51647134102 - Seal, front panel/cooler at top $4.06

51768045445 - Seal, equipment module, front $6.30

Charcoal Filter tubes etc.

08 Vent Pipe 16137845193 $45.70

10 Vent Pipe 16137845195 $34.18

11 Exhaust steam pipe with dust filter 16137845194 $45.70

Exhaust Hangars - 1M specific

3X 18207798560 $16.37

Sideskirt hardware - Bottom - same as 135i, i was just missing a few

2X 07147122913 $0.55

Battery Cables

61129217036 Battery cable (plus pole) $133.66

61127845120 BATTERY CABLE NEGATIVE $25.07

61126929715 Positive battery lead $27.57



Total of all listed= 3827.79




EDIT: After searching the 1M parts I found the quarter panel assembly. It is under the 1 Series M - Base parts, but if going the direction of cutting the flares and having them welded on I would have these parts confirmed as 1M parts from BMW.

41008052627 LEFT REAR SIDE PANEL $613.38
(Performed using adhesive bonding/riveting repair method.)

41008052628 RIGHT REAR SIDE PANE $613.38
(Performed using adhesive bonding/riveting repair method.)

51717166250 COVER, WHEELHOUSING LEFT $57.37

51717166250 COVER, WHEELHOUSING RIGHT $57.37
__________________
Alpine White | Coral Red | 6MT

Last edited by Fifty3bags; 02-20-2014 at 04:06 PM. Reason: Found quarter panel part number
Fifty3bags is offline  
0
Reply With Quote
      02-20-2014, 03:44 PM   #18
Fifty3bags
Lieutenant
 
Fifty3bags's Avatar
 
Drives: 2010 135i
Join Date: Apr 2013
Location: Dothan, AL

Posts: 438
iTrader: (0)

Quote:
Originally Posted by ilikebmxbikes View Post
These are the best photos I can find of a car with 1M Fenders on a 135i sideskirt. I got these off FB, if i had the owners Bimmerpost account I would link them. if anyone has it, please let me know.
I don't know it, but thanks for posting that. Also, if possible I think this thread should be stickied since I see the topic posted quite a bit.
__________________
Alpine White | Coral Red | 6MT
Fifty3bags is offline  
0
Reply With Quote
      02-20-2014, 08:01 PM   #19
scottn2retro
Captain
 
scottn2retro's Avatar
 
Drives:
Join Date: Oct 2007

Posts: 673
iTrader: (0)

Quote:
Originally Posted by Fifty3bags View Post
scottn2retro, Can you get some pictures of where the sideskirt meets the fender, I'd like to see what the width difference looks like.
My facebook album has all these as well as the 1addicts.com race car thread, but I think this is the one you are looking for
__________________
08 135i - Stock Class BMW Club Racer
www.TotalMotorOils.us
Photo Gallery
scottn2retro is offline  
0
Reply With Quote
      02-20-2014, 08:03 PM   #20
scottn2retro
Captain
 
scottn2retro's Avatar
 
Drives:
Join Date: Oct 2007

Posts: 673
iTrader: (0)

Note that for the rear wheels, to get 275x18 tires, Apex race parts makes an 18x9.5 et62 (that's right, 62mm offset) wheel to stuff into the OEM 135 rear fenders without doing that part of the conversion.
__________________
08 135i - Stock Class BMW Club Racer
www.TotalMotorOils.us
Photo Gallery
scottn2retro is offline  
0
Reply With Quote
      02-27-2014, 01:45 AM   #21
Ingeniator
Lieutenant
 
Ingeniator's Avatar
 
Drives: 07 335XI(90) 09 135I(82)
Join Date: Nov 2013
Location: Fort Mac, Alberta

Posts: 466
iTrader: (1)

Quote:
Originally Posted by scottn2retro View Post
Hi All -

On our 135i race car, we're moving up in class, so I'm doing kind of 1M front conversion.
https://www.facebook.com/sctsracing/...type=3&theater

So far, I've only used the 1M front bumper, fenders and front fender liners, but we're a race car going to be in prepared class. For a nice street car, I can definitely see wanting to do the rocker panels and rear fender liners. You could easily fab a piece of plastic from the removed fender liners (and use the speed clips) to fill the 2 holes in between the front center undertray and the new 1M front fender liners

I'm having a hard time sorting through this. I need to rebuild the front end of my new 135i. Other than the bumper/fenders/liners did you need to change the bumper mounts/rad support or any other mount points.
__________________
07 335XI (A008006) 6AT ~94K miles JB4 G5 ISO VSRF DP's
09 135I M (VK80379) 6MT. Race Project car.
1) Rebuild to stock 2) Install Cobb/piggyback? and JRZ suspension. 3) Build parrallel HPFP and highflow intake manifold with multi-port fuel and meth. 4) Build full cage and staged twin setup with twinscroll turbochargers. (BW 7670-1.22 / S374-1.25)
Ingeniator is offline   Canada
0
Reply With Quote
      02-27-2014, 01:54 AM   #22
ilikebmxbikes
Colonel
 
ilikebmxbikes's Avatar
 
Drives: '08 135i
Join Date: Apr 2011
Location: San Francisco

Posts: 2,346
iTrader: (25)

Quote:
Originally Posted by Ingeniator View Post
I'm having a hard time sorting through this. I need to rebuild the front end of my new 135i. Other than the bumper/fenders/liners did you need to change the bumper mounts/rad support or any other mount points.
You need:

Front Bumper
Headlight brackets
Fender Liners ( 2 parts per side)
Underbody Shield
Front Fenders
Side Markers
Windshield Washer Fluid Reservoir
Front Bumper Ducting

Headlight Washers ( Cut to use 135i ones / Upgrade to 1M ones / Delete them)
__________________
MY Build Log
08 AW 135i | Cobb | ETS FMIC | ER CP w/ Tial Bov | AR Catted Downpipes | Berk Mids | Meisterschaft GT SUS 1M |M3 Control Arms | M3 Sways | M3 Rear Subframe Bushings | Wavetrac LSD | AST 4200 DA Coilovers | HRE R43 | Hankook R-S3 |Full BMW Performance Interior | Revozport 1M Raze Aero Package in Satin Carbon |1M Body Conversion|
ilikebmxbikes is offline  
0
Reply With Quote
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 10:31 PM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST