BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read




 

Post Reply
 
Thread Tools Search this Thread
      05-17-2013, 10:52 AM   #1
hlmiii
Lieutenant
United_States
46
Rep
535
Posts

Drives: '11 1M '10 M5 '05 M3 '12 CRT
Join Date: Nov 2008
Location: Houston

iTrader: (1)

Post 1M Prerelease and Development History

After reading a post there Ozinaldo on Bimmerpost suggested that I also post this here. So, FWIW, here's a cut + paste with a few details on our cars. Most are probably aware of this stuff, but the second generation buyers may not be.

One - the final concept, "formal" design and engineering of the 1M took place in only two weeks. It was spoken about loosely, informally and very quietly among the staff for a while. At the end of that time the head of "M" was away on a two-week trip and the staff put everything together, like kids doing something while the parents are out; they knew that they could not get approval for spending the time and effort. Upon his return he was showed a completed project. Since the development portion was essentially complete with no cost incurred, the car could be easily built by shoehorning it into the 128/135 production line during off hours, and the staff was so enthusiastic, the 1M was greenlighted. The staff basically pulled off a parlor trick and won.

Second - there was only one prototype built. Due to the advance and virtually complete initial work (with existent and proven M3 parts) and the tight schedule, there was time and money to use only one car for assembly and testing. That's pretty amazing.

Third - the test car was ... blue. But early on the staff realized the color didn't work. Hence the black, white and VO, as noted.

Four - the staff was really under the gun on the entire project, for both money and time reasons.

Five - they really like how their tuner project turned out.

Appreciate 0
      05-17-2013, 11:10 AM   #2
ozinaldo
Brigadier General
ozinaldo's Avatar
Portugal
79
Rep
3,073
Posts

Drives: 1M
Join Date: Jan 2011
Location: Lisbon, Portugal

iTrader: (0)

Thanks for the thread! And below is what Dackelone posted on the same subject in his bimmerpost thread; to clarify for those who are not aware of this other thread, this was from a recent visit to M Studios by some of our members.

We Tour the BMW M Studio at M HQ and Get Up Close to Some F80 M3 Sedans (info)
http://f80.bimmerpost.com/forums/sho...d.php?t=841012



I really like this part of your writing a lot:

"...the head of "M" was away on a two-week trip and the staff put everything together, like kids doing something while the parents are out; they knew that they could not get approval for spending the time and effort..."

That's the spirit behind our beauties

Dackel's notes:

BMW 1M
Then we got on a side topic about the last M project, the 1M Coupe. We learned some interesting things. The VO (valencia orange) color was a future color in the BMW pipeline. Dr Kay Segler liked it so much he insisted they make the 1M is that color. Then they knew they would have to offer a white and black color - bc every car looks good in those colors. He told us how they really wanted to offer different color stitching accents for each color - but they were tight on a budget plus they were really running out of time. So only one interior color was approved. Same went for some of the other "things" M wanted to do to the car. Like functional vents in the front fenders(the crease), they wanted to produce a carbon fiber roof, but they were running out of time. So in the end their hands were tied by time and budget. They told us how well the 1M sold given limited coior choice and being that the car was only offered in a manual transmision. The car sold far better than BMW ever thought it would. This confirms that there will be an M2 in time.
__________________
"The mark of a great car is one whose overall competence exceeds what you should expect from its individual components and the 1M does just that", Chris Harris.
BMW 1M-SOLD-: TECH: Evolve Race+N55mids, Evolve IC, Michelin PSS, ER cp, aFe filter, CDVx, Vorshlag camber plates, BMS OCC EXTERIOR: trunk spoiler, blacklines, black grills, IND goodies INTERIOR: Alcantara steering wheel, steel pedals, custom mats, MPower e-brake.
Appreciate 0
      05-17-2013, 12:33 PM   #3
hlmiii
Lieutenant
United_States
46
Rep
535
Posts

Drives: '11 1M '10 M5 '05 M3 '12 CRT
Join Date: Nov 2008
Location: Houston

iTrader: (1)

Quote:
Originally Posted by ozinaldo View Post
"...the head of "M" was away on a two-week trip and the staff put everything together, like kids doing something while the parents are out; they knew that they could not get approval for spending the time and effort..."

That's the spirit behind our beauties
It evidently really was like that. The M guys wanted to do an M version of the 1 Series. The staff were thinking + discussing design ideas, etc. that were analogous to the more structured M3/M5 product. They ran the ideas upstream but were told that it just couldn't be done logistically and financially. But they just continued on their own and came up with a "quick and dirty" approach (when compared to BMW's normal OCD style).

They basically presented the project as a "we've got an answer to all your objections." With all of the general design and engineering work done, they were given the okay. The answer to "we have no line capacity" was to have it built during the few periods when the 1 Series line was not needed for ongoing production.

M did the car for fun - they're just big car guys and this was kind of a "garage tuner" dream project. NO one thought it would be received the way it was, which is why the initial number was to be 2,500. Instead, they were concerned the 1M wouldn't sell even that many.

D'oh!
Appreciate 0
      05-17-2013, 02:20 PM   #4
Artemis
Moderator
Artemis's Avatar
Belgium
4518
Rep
7,627
Posts

Drives: BMW M2 (MG 6MT)
Join Date: Jun 2011
Location: Belgium

iTrader: (0)

I repost some 1M development info/trivia over here for the second generation buyers:

Reconstruction of the 1M marketing timeline (hyperlinks to the videos included):An unofficial 1M FAQ:
http://www.bmwmregistry.com/model_faq.php?id=53

About the 1M development:
"Actually, I wouldn't say that we didn't have it [the 1M] on the radar. I mean, there was this thing in the back running that we were thinking about. It really didn't get started till a few years back when our VP of engineering Albert Biermann was at a CCA festival and he got questioned pretty hard that night. And from that he came back from the CCA and brought the ideas back. And [with] a little push from the guys here in NA [BMW North America] as well, we got the ball rolling and started coming up with the first concepts. Actually, the first time we came up with the concept, it got shot down. But at that time [former ///M Boss] Dr. Segler was pretty persistent as we know him. Went back in and presented the case again. And we got the approval. And that's when everything started happening very-very quickly. We never developed a car so quickly as the 1-Series M Coupé. [...] I remember the day that Dr. Segler came to me and said «OK Brian [Brian Watts – Head of Marketing & Sales for BMW M], we got approval, what are we gonna do ?». And basically he gave me three days to come up with the whole marketing concept. So, as challenging as it is sometimes. But it was a great project. It's been an extreme success. We're so happy with it. I was at the ///M Festival this year [2011] and also coming here [Laguna Seca - US] and everyone that I've talked to - there's not a disappointment in anyone's face."
(http://www.bimmerfile.com/podcast/bimmercast_54.mp3 [04:54-06:34])
(http://www.bimmerfile.com/2011/08/21...les-for-bmw-m/)

"The time window for this car [1M] [was] extremely tight and originally enthusiasm was not apparent until Dr. Kay Segler came to the M Division.
We had initially toyed with the idea of a 1M when we were conceiving the Coupe and did work with evaluation models then using the engine from the E46 and the upgraded E46 CSL engine but it proved to be too heavy for the car.
Originally in the early days of marketing the standard 135i was originally meant to be an M model.
The 1M that stands before you now [2010] has had possibly the most progressive stage from thought-production turnaround for a BMW. There had to be a lot of arm-twisting in the BMW Board because of the tight window between generation 1 and generation 2 of the Coupe. The proposal was greenlighted when BMW decided to use the Coupe model for the BMW eDrive evaluation. Therefore slightly extending its life cycle.
When I first saw the car it was in a design studio as a full scale clay-model but since then some designers ideas have to make way for aerodynamics and engineering. The initial engine proposal was the N55 but they were having issues that cannot be solved within the time window. BMW greenlighted this car in July 2009, now over a year later [2010] we see it as it [is] intended, although testing still commences until the launch. Valvetronic was the main cause of the time delay but BMW have spent some time on this and are using the N55 as a basis for the next M3.
The best way to describe the engine of the 1M is a "Hybrid" but in the original form of Hybrid, nothing to do with "alternatives", but it is not a straightforward transplant.
There is a lot of this car that will carry over for the next generation 1M in which that car will switch to four cylinders to which the M Division engineers are already working on the basics without time constraints or restrictions. E82 1M is showing what is possible in a small time-frame. F22 1M will show what is possible once you do not have restrictions."

http://www.1addicts.com/forums/showp...79&postcount=1

"Development of the engine.
The development time of the engine was very short – engineers took only about a year to build it if not less, beginning in October 2009. In December 2009 the decision was made to build the 1M. Dr. Segler championed the project and made all major decisions. Took around 1 year to develop and test the car. M cars utilize the Nurburgring circuit for extensive testing. All the testing needed to be completed in Spring and Summer [2010] before bad weather starts. He said the engineers and designers worked very, very hard to complete the project. Dr. Segler was emotional and had a few tears the first time he saw the car in completed form. In a broken voice, he said, «we need to build this car».
The 1M is powered by the N[5]4 twin-turbocharged 3.0-liter I-6 engine. For the 1M, the turbocharger, exhaust system, and ECU have been revised to produce 335 horsepower and 332 pound-feet of torque, though up to 369 pound-feet are available temporarily in overboost mode. Redline is found at 7000 rpm."

http://www.bmwblog.com/2011/01/21/bm...-need-to-know/

BMWBLOG: "How long is the design process to produce an M car?"
Dr. Kay Segler: "It depends. We don't compromise therefore we come later than the base model as you see with the new M5, because we don't want to compromise. On the 1 series M coupe we were very, very fast – I mean tremendously fast! We took some risks but we managed it because we are a very small team, there is no hierarchy. Basically the principle idea was in June/July of last year [2009] that we might do something like this and we will bring it out next spring [2011]. So great job by the team."
http://www.bmwblog.com/2010/08/29/bm...dr-kay-segler/

"Over the past two days we've learned quite a lot about the 1M from Dr Kay Segler and BMW NA M Brand Manager Matthew Russell. For starters yes that is a Z4 35is N54B30TO (aka «N54HP») engine under the hood. While we had heard that there were various internal changes done by M, we can now confirm that there are no physical changes to the engine. As you heard in our interview with Matt Russell the Z4 35is has a N54 variant that was itself tweaked by the engineers at M. Specifically they have created two throttle maps (via the M button) and in turn created the most raucous N54 variant yet (based on how it sounded while revving at the show). From the lighter flywheel to the enhanced software and everything in between M went through the N54 thoroughly in creating the Z4 35is. Tolerances are tighter and the soul of the engine has been enhanced. Dr. Segler was adamant that M had taken the soul of this N54 and turned up several notches to create something that has a different character than the Z4 35is.
Also interesting was Dr. Segler's comments on the development of the car. The time-frame that M had to work within was impacted by of all things the weather. The fact that most of the development took place at the 'Ring (an M tradition) meant that M only had from April to October of this year to engineer and then sort the car. But what you end up with is «Pure M» has Dr. Segler calls it. What does that mean? In a quantitative way it means the 1M can do four laps on the 'Ring generally unfazed (i.e. without much brake fade etc).
The manual transmission has been something often overlooked when talking about the 1M. Yes the lack of DCT has been referenced constantly in forums and even was the NAIAS floor this week [January 2011]. But what about the actual 6-speed in the car ? We can now confirm that it is the same 6-speed found in the 135i with a E46 ZHP shift knob. The clutch however is the same item as in the 335is (due to needing to support the 369 ft-lbs of torque on overboost).
Speaking of transplants one of the more interesting things we learned this week is that M not only transplanted the entire suspension and braking system but the sub-frame of the M3. It's easy to compare this car to a E30 or even an E46 M3. But the more you look at the components the more the 1M looks eerily similar to the E92 M3 on paper.
Finally the question of brake ducts. Yes the pair giant holes in the front bumper are not brake ducts as you might expect. They are actually need to bring air to the oil and water coolers. But M hasn't forgotten about the brakes. Instead M has designed paths cleared under the chin to ensure plenty of fresh air reaches the brakes."

http://www.bimmerfile.com/2011/01/12...ission-brakes/

January 2010 info (thus many months before the 1M development was finalized) :
"The purpose behind the M1 [1M] is to not concentrate on power solely but produce a car which is more entertaining and more thrilling to drive than cars that will probably cost twice as much or three times and so on.
M1 [1M] is purely about driver focus and torque. Two elements that are going to make this a very exciting car. It's a car that is going to be full of characteristics. It is also going to be a car that will be realistically affordable. Such a concept will be successful in the largest M market, North America. It [is] also within BMW's drive to produce exciting cars on compact platforms. The recession told us that consumers were willing to downsize for the right product and we [have] seen that in the 1er. Although there is the trend for «downsizing» in the US it is down to gas prices which are driving US consumers to smaller compact models. However the added concern amongst everybody is if gas prices fall to normal levels then American consumers will go back to larger cars. With the M3 overlooking the M1 [1M]'s shoulder it will be positioned not to outclass that car in terms of power. Which is why it will be in the mid three hundreds. If there is a car that will define M «The Next Chapter» for a new generation it will have to be the M1 [1M], it is really going to bring a lot of new customers to the BMW brand. It will be the equivalent of a must have laptop, TV, iPod, etc. An indulgement you just have to get."

http://www.1addicts.com/forums/showp...&postcount=108

About the lack of CF roof and functional side vents:
"Was at M studio this week [October 2011] as part of my ED and got to talk for to a lead engineer for quite a while. He clarified that these front fender areas that now suggest the vents, originally were meant to have real functional vents. They'd be even bigger than the ~2cm they are now. (Thus cutting them open in the shape they are now would apparently not provide much aerodynamic benefit, i.e. release significant wheel well air pressure). However they couldn't get the fender sheet stamping molds accurate enough within the allotted time/budget. Particularly the two fenders sides exactly mirroring each other in shape proved too hard to achieve with functional vents. Pity, but I do respect that they either do it right or not at all."
http://www.1addicts.com/forums/showp...87&postcount=7

"[T]hey were tight on a budget plus they were really running out of time. So only one interior color was approved. Same went for some of the other "things" M wanted to do to the car. Like functional vents in the front fenders (the crease), they wanted to produce a carbon fiber roof, but they were running out of time. So in the end their hands were tied by time and budget."
http://f80.bimmerpost.com/forums/sho...80&postcount=1

About Xenon lights instead of halogen lights:
"It was a plan of BMW to bring the 1M Coupe with halogen headlights and not with Xenonlights as standard equipment, because they wanted to reduce the price under the magic line of 50.000 Euro. So the nearly ready 1M with the halogen lights came to the acceptance test (TÜV) and failed. Why ? Because the parking lights of the halogen headlights where too much inwards (because of the wider fenders the 1M got compared to the stock E82) and so BMW had to put the Xenons in as standard equipment (the parking lights are more external because of the "angel eye design" [coronas]) and the price raised to 50.500 Euro (later 51.500 Euro) [Germany]."
http://f87.bimmerpost.com/forums/sho...9&postcount=92

About the 450+50Nm (overboost) torque and transmission:
"Around the 1M development, the transmission was rated by the supplier up to 450Nm, and the engineering team then had to agree with supplier on tests that BMW M themselves would do to qualify up to 500Nm. It seems likely that transmission contributed to the reason why the peak torque is be limited in duration, i.e. boost period only."
http://www.1addicts.com/forums/showp...3&postcount=16

About the choice for PS2 choice (instead of PSS tires):
Expert dialogue: "Why is the BMW 1 Series M Coupé supplied with the Michelin Pilot Sport 2 ex works instead of the current successor product, the Michelin Pilot Super Sport?"
BMW M Engineer J. Schwenker: "The successor to the excellent PS2 is the PS3. At the time of vehicle testing and homologation, the Michelin Pilot Super Sport was not yet available in this size."
http://www.bmwblog.com/2011/05/24/ex...r-j-schwenker/

About the limited production volume and color scheme sales:
Brian Watts (Head of Marketing & Sales for BMW M) in a BimmerCast interview at BimmerFile (2011):
"[T]his is a limited production here in the States and that’s how we should treat it. We kept the volumes limited and keep the nostalgia up. This is one of those cars that will be a collector’s item in the future." - "We kept the colors pretty much limited. We did, you know, black, white and Valencia Orange. And pretty much that's how they've sold: a third, a third, a third."
http://www.bimmerfile.com/2011/08/26...on/#more-14574 - http://www.bimmerfile.com/2011/08/21...les-for-bmw-m/ (in this interview he also pointed out the key importance of Dr. Kay Segler in securing the 1M project)

About 1M v. M3:
Dr. Kay Segler (M Division boss who secured the 1M project) when asked during a workshop at the 2011 Detroit Auto Show (Jan 2011) to coin the 1M in a single phrase:
"The 1M is basically a truncated M3 Competition Package with a manual".
He added that the 1M does not need more power and that the production volume was kept low "to keep resale value as high as possible - creating an instant classic".
http://www.bmwblog.com/2011/01/21/bm...-need-to-know/

Info of January 2010 pointing out that it was a deliberate choice to keep the 1M out of the M3 comfort zone (engine + power):
"The M1 [1M] will not feature a V8 that remains exclusive to the M3. The engine is based on the updated N55 [read: N54] six cylinder but reconfigured by the M Division to accommodate Twin-Turbo and a high performance intercooler.
PS Output is at 345PS again not to tread on the toes of the M3."

http://www.1addicts.com/forums/showp...5&postcount=59

"With the M3 overlooking the M1 [1M]'s shoulder it will be positioned not to outclass that car in terms of power. Which is why it will be in the mid three hundreds [PS]."
http://www.1addicts.com/forums/showp...&postcount=108

About Valencia Orange:
Valencia Orange is named after the Ricardo Tormo Circuit in Valencia (Spain) (Circuit de la Comunitat Valenciana Ricardo Tormo), where BMW hold their Young Talent Cup. Furthermore, on the shores of Valencia, the BMW Oracle Racing team won the 33rd America’s Cup.
(http://www.bmwblog.com/2015/05/21/bm...d-race-tracks/)

"Why Valencia Orange?
Ironically, the 1M was first presented to Dr. Segler in Valencia Orange and it was so good that the color made it to the production model. As a fun fact, we observed Dr. Segler was wearing a new Rolex Milgauss which had a black dial with orange second hand and dash marks. True love for the color scheme…"

http://www.bmwblog.com/2011/01/21/bm...-need-to-know/

"The VO (Valencia Orange) color was a future color in the BMW pipeline. Dr Kay Segler liked it so much he insisted they make the 1M in that color. Then they knew they would have to offer a white and black color - bc every car looks good in those colors. He told us how they really wanted to offer different color stitching accents for each color - but they were tight on a budget plus they were really running out of time. So only one interior color was approved. [...] They told us how well the 1M sold given limited color choice and being that the car was only offered in a manual transmission. The car sold far better than BMW ever thought it would. This confirms that there will be an M2 in time."
http://f80.bimmerpost.com/forums/sho...80&postcount=1

BMWBLOG: "I’m trying not to pry but it's tough! Can you tell us about a few design highlights of the 1M Coupe? Any details are welcome!"
Dr. Kay Segler: "The one thing I can tell you is that we will reveal a color, and similar to the GTS color, it will not be forgotten. People in some years will recognize it. That's one detail."
http://www.bmwblog.com/2010/08/29/bm...dr-kay-segler/

About the possibility of a 1M Cabrio:
Scott26: "We are certainly in a much better position to propose an M2 Cabrio.
They did make one for the 1er M Coupe but it never made production."

http://www.2addicts.com/forums/showp...6&postcount=10
"I don't think it is @ M [BMW M secret garage featuring rarities]. But at the other facility."
(http://www.2addicts.com/forums/showp...6&postcount=13)

The "Pyrat" code name lives on on parts stickers. See for example this sticker on a wheel housing part for the 1M (fender liners).

Name:  MPyrat.jpg
Views: 4223
Size:  54.9 KB

This render shows the 1M with functional side vents and CF roof (as was initially intended but did not come to fruition due to tight time and budget constraints):
Name:  1M_Render.jpg
Views: 9215
Size:  231.4 KB

More renders of the functional side vents:
Name:  OpenVents_VO_1.jpg
Views: 1790
Size:  39.7 KB
Name:  OpenVents_BSM_1.jpg
Views: 1787
Size:  32.6 KB

1M test mule cavalry (see also: http://www.1addicts.com/forums/showp...16&postcount=1):
Name:  Red_1M.jpg
Views: 6043
Size:  59.8 KB
Name:  Red_1M_02.jpg
Views: 6032
Size:  49.4 KB
Name:  TestMule_1M_Seats.jpg
Views: 12015
Size:  45.9 KB

Dr. Kay Segler interviewed about the 1M (August 2010):
http://www.bimmerfile.com/2010/08/28...r-interviewed/
http://www.bimmerfile.com/podcast/bimmercast_29.mp3

Dr. Kay Segler revealing the 1M at BMWCCA Oktoberfest 2010 (BMW CCA) + speech ("And this color [Valencia Orange] - as ///M is important for color - you will love that color, it will be a historical color in some years from now") (04:36-04:45) (14:06):


Dr. Kay Segler at Autosport Awards 2010 in London ("Manual, like the old guys did it, just manual, but that's the perfect sports car of the future") (02:27-02:34) (02:42):


Dr. Kay Segler at the 2011 North American International Auto Show (Detroit) ("It's on offer in three colors but definitely this is the color you'll have to order: it's Valencia Orange") (00:29-00:36) (02:57):


1M media introduction (USA) (24:09)

Here are the three notorious 1M commercials that were released when the 1M was already on sale.

"Walls" 1M commercial (thread of June 8, 2011):
http://www.1addicts.com/forums/showthread.php?t=542058


"Helipad" 1M commercial (thread of June 28, 2011):
http://www.1addicts.com/forums/showthread.php?t=550854


"Perfect Balance" 1M commercial (thread of February 3, 2012):
http://www.1addicts.com/forums/showthread.php?t=643482
__________________
“For ’tis the mind that makes the body rich” (W. Shakespeare, The Taming of the Shrew, Act 4, Scene 3)

Last edited by Artemis; 01-10-2016 at 08:06 AM. Reason: Added info and videos
Appreciate 0
      05-17-2013, 02:20 PM   #5
sergeremi
Lieutenant
18
Rep
571
Posts

Drives: 1 Series M Coupe
Join Date: Jun 2009
Location: MA

iTrader: (0)

Makes me smile... Bookmarked for future reference
Appreciate 0
      05-17-2013, 03:47 PM   #6
RoadRunner///M
Major General
RoadRunner///M's Avatar
No_Country
213
Rep
6,461
Posts

Drives: 1M (Sold), M3 F80
Join Date: Mar 2011
Location: Sydney, Oz

iTrader: (0)

Nice to read these again
__________________
BMW F80 M3 DCT - Silverstone II - AA Mids, BM3 tune
Appreciate 0
      05-17-2013, 04:33 PM   #7
andrés
Enlisted Member
Mexico
0
Rep
46
Posts

Drives: 1M BSM
Join Date: May 2012
Location: mexico city

iTrader: (0)

this is a great!!
thanx for posting
Appreciate 0
      05-17-2013, 04:45 PM   #8
ayao
Thread killer
177
Rep
1,471
Posts

Drives: 1M
Join Date: Aug 2011
Location: CA

iTrader: (2)

From dackel's recent M studio visit post:

"Then we got on a side topic about the last M project, the 1M Coupe. We learned some interesting things. The VO (valencia orange) color was a future color in the BMW pipeline. Dr Kay Segler liked it so much he insisted they make the 1M is that color. Then they knew they would have to offer a white and black color - bc every car looks good in those colors. He told us how they really wanted to offer different color stitching accents for each color - but they were tight on a budget plus they were really running out of time. So only one interior color was approved. Same went for some of the other "things" M wanted to do to the car. Like functional vents in the front fenders(the crease), they wanted to produce a carbon fiber roof, but they were running out of time. So in the end their hands were tied by time and budget. They told us how well the 1M sold given limited coior choice and being that the car was only offered in a manual transmision. The car sold far better than BMW ever thought it would. This confirms that there will be an M2 in time."

http://f80.bimmerpost.com/forums/sho...d.php?t=841012
Appreciate 0
      05-17-2013, 06:32 PM   #9
Dackelone
European Editor
Dackelone's Avatar
Germany
6260
Rep
22,035
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

One thing I forgot to write in my ///M Studio tour was ///M also really wanted to offer a blue and maybe a grey or silver.. but there was not the budget for it. So they kept things simple with just the three colors they went with.

hlmiii - thanks for telling us this story again.
__________________
Appreciate 0
      05-17-2013, 06:49 PM   #10
BrokenVert
Resident Kerbalnaut
BrokenVert's Avatar
United_States
333
Rep
10,710
Posts

Drives: Topless Brute/Hybrid Boogaloo
Join Date: Apr 2009
Location: Fahrvergnügen/NY

iTrader: (0)

Remember when we first saw this car and flipped?



__________________

Appreciate 0
      05-18-2013, 01:31 AM   #11
CarJunkie
Major
United_States
218
Rep
1,233
Posts

Drives: VO 1M
Join Date: Nov 2011
Location: Tri-Cities, Washington

iTrader: (1)

Garage List
2011 BMW 1M  [0.00]
Great nostalgia in here!
Appreciate 0
      05-18-2013, 04:08 AM   #12
sparoz
Brigadier General
sparoz's Avatar
Australia
120
Rep
4,837
Posts

Drives: VO 1///M; AW X3 30d
Join Date: Jun 2008
Location: Sunshine Coast

iTrader: (0)

Can we suggest this as a sticky?
__________________
Macan S Diesel - Carrera White
Macan Turbo - White
1///M - Valencia Orange
Appreciate 0
      05-18-2013, 05:20 AM   #13
Dackelone
European Editor
Dackelone's Avatar
Germany
6260
Rep
22,035
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

Arrow 1M Testwagens...

Here are some prototype pics from my collection. I really do not remember a Blue 1M testwagen. All the ones I saw were always in Sedona Red or in Jet Black or BSM.

Name:  1m-3.jpg
Views: 5319
Size:  73.6 KB

Name:  1m-4.jpg
Views: 4595
Size:  75.5 KB

Name:  1m-5.jpg
Views: 4597
Size:  97.3 KB

Name:  1m-10.jpg
Views: 6123
Size:  87.2 KB

Name:  1m-11.jpg
Views: 4714
Size:  87.4 KB

Name:  1m_2_mule.jpg
Views: 4554
Size:  54.6 KB

Name:  1M_autonews_biermann.jpg
Views: 4566
Size:  107.2 KB

Name:  02-2012-bmw-1-series-m-prototype-drive-opt1.jpg
Views: 4736
Size:  74.1 KB

Name:  4933643191_7a96b3a8c5_b.jpg
Views: 4519
Size:  333.5 KB

Name:  BMWBMW_1mcoupe_rood_770213a.jpg
Views: 4629
Size:  416.4 KB

Name:  m1-3.jpg
Views: 4539
Size:  306.5 KB

Name:  m1-1.jpg
Views: 4490
Size:  228.6 KB

Name:  produktion1bp.jpg
Views: 4413
Size:  128.7 KB

Name:  rear_right-655x345.jpg
Views: 4903
Size:  49.8 KB

Name:  model_1M_P1100366.jpg
Views: 4424
Size:  95.1 KB

Name:  bmw_1_m_2011_93.jpg
Views: 4844
Size:  25.4 KB

Name:  bmw_1_m_2011_92.jpg
Views: 4392
Size:  33.2 KB

Name:  bmw_1_m_2011_9.jpg
Views: 4368
Size:  23.7 KB

Name:  bmw_1_m_2011_91.jpg
Views: 4843
Size:  28.1 KB

Name:  1er-sport-01.jpg
Views: 4406
Size:  172.8 KB

Name:  1er-sport-02.jpg
Views: 4401
Size:  179.9 KB

Name:  1er-sport-03.jpg
Views: 4694
Size:  223.3 KB

Name:  1M_all_three_colors_!!_216699_224917180884655_115076511868723_588765_883278_n.jpg
Views: 4363
Size:  89.4 KB

Name:  1M_all_three_colors_!!_225747_224916320884741_115076511868723_588752_5223687_n.jpg
Views: 4335
Size:  92.6 KB

Name:  bmw%20m1%20ring%203.jpg
Views: 4369
Size:  737.5 KB

Name:  bmw%20m1%20ring%204.jpg
Views: 4470
Size:  536.0 KB

Name:  bmw%20m1%20ring%207.jpg
Views: 4435
Size:  726.6 KB

Name:  m1%20on%20the%20ring%206.jpg
Views: 4369
Size:  536.9 KB

Name:  m1%206.jpg
Views: 4388
Size:  524.7 KB
Attached Images
   
__________________
Appreciate 0
      05-18-2013, 05:35 AM   #14
Robin_NL
S0THPAW
Robin_NL's Avatar
Netherlands
1876
Rep
6,499
Posts

Drives: LBB M2+MPE
Join Date: Apr 2005
Location: The Netherlands/ Lilyhammer, Norway

iTrader: (0)

1M: A driver's car for enthusiasts developed and made by enthusiasts. Car companies are run
by accountants for lots of reasons , but I'm so happy Dr Segler is not one of them.




*subscribed*

Cheers
Robin
Appreciate 0
      05-18-2013, 05:53 PM   #15
ozinaldo
Brigadier General
ozinaldo's Avatar
Portugal
79
Rep
3,073
Posts

Drives: 1M
Join Date: Jan 2011
Location: Lisbon, Portugal

iTrader: (0)

Since we got ourselves a well deserved sticky I want to re-post Jon Sibal's renders of 1M here which served me like many others as longest lasting wallpapers ever and cemented my conviction that I had to buy this car no matter what, just imagine how perfect would it be with some details that Sibal got better than BMW, e.g. the trunk and especially the side creases, also worths noting that production 1M's wheel arches were even more flared than these renders dared to suggest back in 2010:

Name:  bmw_1m_coupe_by_jonsibal-d2yrcdj.jpg
Views: 5381
Size:  887.8 KB

Name:  bmw_1m_coupe_rear_quarter_view_by_jonsibal-d309hsk-655x490.jpg
Views: 4156
Size:  91.4 KB
__________________
"The mark of a great car is one whose overall competence exceeds what you should expect from its individual components and the 1M does just that", Chris Harris.
BMW 1M-SOLD-: TECH: Evolve Race+N55mids, Evolve IC, Michelin PSS, ER cp, aFe filter, CDVx, Vorshlag camber plates, BMS OCC EXTERIOR: trunk spoiler, blacklines, black grills, IND goodies INTERIOR: Alcantara steering wheel, steel pedals, custom mats, MPower e-brake.

Last edited by ozinaldo; 05-18-2013 at 06:04 PM.
Appreciate 0
      05-18-2013, 06:03 PM   #16
BrokenVert
Resident Kerbalnaut
BrokenVert's Avatar
United_States
333
Rep
10,710
Posts

Drives: Topless Brute/Hybrid Boogaloo
Join Date: Apr 2009
Location: Fahrvergnügen/NY

iTrader: (0)

While were on the subject of renders. Remember these? Scott said that if the 1M sold out wed get a vert...Scott lied, and I still havent forgiven him.








[IMG]http://i639.photobucket.com/albums/uu113/mdkalish/BMW-1er-M-Cabrio-Renderings-***********-Wildspeed-21_zpsb26c1c3e.jpg[/IMG]
[IMG]http://i639.photobucket.com/albums/uu113/mdkalish/BMW-1er-M-Cabrio-Renderings-***********-Wildspeed-21_zpsb26c1c3e.jpg[/IMG]
__________________

Appreciate 0
      05-18-2013, 10:46 PM   #17
PyratOne
Lieutenant
PyratOne's Avatar
United_States
15
Rep
436
Posts

Drives: 1M Coupe (Not an M1!)
Join Date: Jun 2010
Location: MA

iTrader: (0)

BV,

That blue 1M vert render is pure sex. I've had impure thoughts of chopping my roof and respray to make that car
__________________
“Balancing this thing on the steering and throttle is pretty much the crack cocaine of the car world.”

Top Gear Magazine - Jason Barlow about the 1M
Appreciate 0
      05-27-2013, 01:43 AM   #18
SickFinga
Lieutenant
314
Rep
505
Posts

Drives: *
Join Date: Jul 2012
Location: *

iTrader: (0)

Here is something that I discovered a while ago that is right on topic. The VO 1M that was used on brochures and press photos is a very early prototype. It is officially a 135i and not yet a 1M. I'm talking about this car.



Here are full-sized images of the engine bay where you can see VIN stamped on the shock tower. Before proceeding, these are 5mb photos.
Photo 1

Name:  P90068871.jpg
Views: 3745
Size:  237.4 KB

Photo 2
Name:  P90069712.jpg
Views: 3755
Size:  255.4 KB


Here is the build sheet for this car

Appreciate 0
      05-27-2013, 06:35 AM   #19
elitt13
Lieutenant
elitt13's Avatar
France
44
Rep
446
Posts

Drives: BMW Serie 1///M Coupe
Join Date: Jan 2010
Location: soutern france

iTrader: (0)

Garage List
2011 BMW 1M coupé  [0.00]
2007 335i  [0.00]
nice thread !!
__________________
- Série 1 ///M BSM -
Appreciate 0
      05-27-2013, 07:02 AM   #20
Dackelone
European Editor
Dackelone's Avatar
Germany
6260
Rep
22,035
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

Quote:
Originally Posted by SickFinga View Post
Here is something that I discovered a while ago that is right on topic. The VO 1M that was used on brochures and press photos is a very early prototype. It is officially a 135i and not yet a 1M. I'm talking about this car.
^^That is very interesting. I wonder what ever happened to this early prototype. Also curious its a euro 135iS when they never made such a car for Europe AND that the car was built in 2008(!) and was BSM!! Well... someone at BMW painted it VO.
__________________
Appreciate 0
      05-27-2013, 07:18 AM   #21
Robin_NL
S0THPAW
Robin_NL's Avatar
Netherlands
1876
Rep
6,499
Posts

Drives: LBB M2+MPE
Join Date: Apr 2005
Location: The Netherlands/ Lilyhammer, Norway

iTrader: (0)

@SickFinga(or should I call you Mr Holmes) : Nice info. Thanks.


Some other strange things:

135iS engine output: 225kW=306BHP(normal EU spec N54 135/335i output on paper) and not the 'full' 340 of the 1M. (EU spec)

Colour : Black and not VO.

Cheers
Robin
Appreciate 0
      05-27-2013, 12:20 PM   #22
Artemis
Moderator
Artemis's Avatar
Belgium
4518
Rep
7,627
Posts

Drives: BMW M2 (MG 6MT)
Join Date: Jun 2011
Location: Belgium

iTrader: (0)

[quote=SickFinga;14057949]The VO 1M that was used on brochures and press photos is a very early prototype. It is officially a 135i and not yet a 1M. I'm talking about this car.[/IMG]

I guess the 1M in the pictures is a 1M, but BMW simply allocated an 'old' VIN. Probably the VIN allocator did not feature yet a 1M category at that time, so they pigeon-holed this prototype in an existing category: 135i.
__________________
“For ’tis the mind that makes the body rich” (W. Shakespeare, The Taming of the Shrew, Act 4, Scene 3)
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 02:37 PM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST